Smartest DIY Welding Table Clamps
Vložit
- čas přidán 22. 03. 2019
- in this Videoclip i show a very good System for a weldingtable. This weldingclamps is build just from my personal skills and not a instuctional step by step Video.
Hope you get inspired
Dirk Ahrendt
Your vice with the magnetic drilling machine is a brilliant idea. And then welding clamp very innovative idea. Great going
Thank you 😁
Absolutely beautiful design! Perfect for thinner welding table. Thanks much!
Thank you 😁
Love the sound of welding when movie is speed up. Sounds like an old video game. 😜
😅😂
Dirk - your vids DO inspire me. Thanks.
Very useful DIY project, thanks for sharing it with us 🙏🏼
That big ass drill bit destroys. 👍👌🤘
FINALLY SOMEONE THAT KNOWS HOW TO MAKE A DIY VIDEO!!!! Thank You!!
Класс. Мастер! Супер сделано! Все на месте! Все с умом🤝
Your a lucky Guy, so many nice Tools from Fein! Greetings from Germany
Dankeschön 😊 hat mal mit einem Akkuschrauber angefangen und auf einmal .... 😅
@@TheMetalist Kann ich mir gut vorstellen, hat bei mir mit nem Blechknabber angefangen und schwups ist überall orange ^^
This is a great idea. I like it a bunch. 🙂
Great job. Hat off to you sir for the magnets. You had me wondering what it was all about but it all came together very well. You just need to create non magnetic spatter!!
Bold and Inspiring. Keep it up. From Spain
Thank you 🙂
That drill and bits are champions. Great video
Just a thought if you use a bolt on the end you could dual purpose the clamps or quadruple purpose by using a barrel nut you could make extension clamps with a pipe like a pipe vice. Flip the clamp around and
And make a spreader
Love that hack!
Finally a good idea I want to implement
Thanks for another great video. Wouldn't it be cool if we could really work that fast? Have a good one man.
Great idea 👍 I know it's a pain in the butt to put nuts on the ones I made
Классно придумано.
Возьму себе на заметку.
Спасибо и удачи.
Он что магниты в отверстие прикрутил? А то я не допонял!
@@user-yp6ug7vq5u да это неодимовые магниты, чтобы струбцина не падала при снятии нагрузки.
Your clamps are great, but I LOVE your mag drill stand withe the vise. I am so copying/making that!
Thank you.
I Made a Video from my magdrill stand.
czcams.com/video/lvhwczDgNqI/video.html
Man those are slick. Very nice. I'm also loving the stand you have for your mag drill. I'll have to try and make something similar for mine.
Thank you 😊
Magdrill stand Video is on!
czcams.com/video/lvhwczDgNqI/video.html
@@TheMetalist That is awesome
That is a genius idea you did with your mag drill… Nice work with the clamps I have to remember that when I get my table
Thank you 😁
Magdrill stand Video is on!
czcams.com/video/lvhwczDgNqI/video.html
Nice work..
It is really great idea especially using a small holes into the welding table
Thank you 😊
Solid. Gathering fab ideas for my own table and this is rad. Either going 3/8 or 1/2 top and mag drilling holes similar to what you’ve done. This style clamp is perfect 🤟
One comment, beat the round bar towards back of vice, the movable jaw does not like getting beat on...cheers, lovely video , PB
Great Job.
Thank you 😁
Wow perron saludos de cd. Juarez mexico 👍👏👏👋
Thank you 🙂
Я и смотрю чего у тебя в мастерской не хватает?!?!?! Точно этих железячек)) как ты догодался? Прям на все руки мастер)
Магнитов еще сварочных нету, видишь как мучается когда варит
Доктора Дью в голове.
I love the idea
Thank you 😁
Nice Job.
Thank you 😊
Excellent design and very well done ✅👍
Thank you 😃
Top de mais excelente!!!
Thank you 😁
great video
Thank you 😁
I think you can realize alien baby's" Alien the eighth passenger"You have the style for..From the artist Hans Ruedi Giger
that man has skills
Thank you 😁
Awesome video! The speed actually was really good!!
Thank you😊
Genius dude
Thank you 🙂
who makes that ruler you're using to layout and scribe lines?
Top ! Super boulot
Thank you 😁
Nice design. I'll be making some for my woodworking bench 😁
Thank you 😁 can't wait to see yours
How come you don't use coolant or cutting grease @1:37 with the drill press machine? Is it because the bit is tungsten carbide and doesn't need it? I really love the portability of the drill.
Great job. I'll try myself. What is the size and thickness of the pieces you cut between 0:30 and 1:00 ?
Thank you 😊 its 8mm
The mag drill stand is brilliant!
Thank you 😊
Hi thank you for your videos they are super cool, I'm in France. What is the make and model of your band saw?
Thank you 🙂 its a Optimum opti saw s100g
Awesome videos. Is there a chance that hook will booger up the threads on the table? I may be over thinking this. Thank you
It could be.....they are still ok till now
Very stable design. If you have the standard (more or less) 5/8” holes though it’s obviously impractical. You’ve got me thinking how much.i like the stability of yours. At taller heights mine move off center quite a bit
Thank you. The holes are 10mm i guess its a 3/8 with a 12mm thread. My workshop is in the basement that why i needed a light #weldingtable. The baseblade is just 6mm thick.
Awesome idea. Interested in the style of magnets you used.
Thank you 😊
대한민국 어디든 아무곳에나 다 이런 아이템 한30년전부터 하고 있습니다 ㅜㅜ
Fireball Tools sells this for 3/16" thick tables. $16 ea.
hi, why did you make hole of 10mm instead of 20 mm? to be more efficient to attach other machines? thks
and 2/ here why did you put "circles" on the big hole on the base blade instead of welding an squared iron plate? 6mm thick for the circle is that right ? thks a lot and GOOD GOOD JOB i'm dreaming on it to do the same but only one question : how i will do that to succeed like you ! :)
It looks like you're welding straight to galvanized clamps? Did you prep them in any way? Or did the flap disk remove enough?
The flap disk remove enouth 😊
Great job well done 👍👍!!!
Thank you 😊
WOW - what a brilliant idea. Very clever hook and magnet solution that immediately solves the drop-in clamp with a relatively thin table top (6mm). Another idea of yours that I need to implement. If you don't mind me asking, what size rod did you bend to make the hooks? Thank you ! Joel.....
Thank you 😁 the hooks are 8mm the hole is 10mm with a 12mm tap
Three questions: how thick is your welding table, how large are the holes in it and what diameter rod did you make the clamp hooks from?
Great idea and build!
Thank you 😊
The baseblade is 6mm thick the holes are 10mm with a 12mm tap in it. That I'm able to screw something in it. And the Hock is a 8mm rod but a harder alloy like regular steel.
@@TheMetalist how far are the holes from each other boss
@@horaciosalinas8145 10x10cm
Right on! Great tech idea! Hey what kinda msg drill is that? I need to get one! And would like to see the stand you made for it too!
Thank you 😊 its a Fein KBU 35-2 QW.
One of the next Videos will be a new stand for the magnetdrill. I've some new ideas for it 😁
Mag drill stand Video is on 😊
czcams.com/video/lvhwczDgNqI/video.html
Hola que tal que le pones en la base de la prensa
Срочно, к доктору :) Он оценит эту идею, причем буквально!
Una gran idea, gracias por compartir, saludos cordiales desde Santiago de Chile
Nice equipment. Very talented
Thank you 😊
I've been looking around at different clamping systems and yours is brilliant! The other methods all require big holes. Your method shows simplicity and elegance.
Where did you get the clamps?
My next welding table is totally going to use your ideas!
Thank you 😊 Thats regular Steel clamps from Bessey 120x250
@@TheMetalist Thanks. I was looking at the Bessey HD clamps with removable pads, but the cheapest I can find those suckers is about $85 each! I'll check these out, hopefully they're a bit more economical.
@@Katoutwo Strange ... i also couldn't find them on the us Website, just in Europa! Maybe get some middle price clamps or some used ones on eBay that will work also.
Clamps: www.amazon.com/MAXPOWER-2-Pack-Clamps-Ergonomic-Protective/dp/B07G2YBB32/ref=sr_1_32?dchild=1&keywords=K%26M%2BSPECIALTY%2BWELDING%2BTOOLS%2BUSA&qid=1595774520&sr=8-32&th=1
More clamps:
www.banggood.com/Heavy-Duty-F-Clamp-160x80300x80mm-Welding-Quick-Grip-F-Style-Woodworking-Clamp-p-1471415.html?rmmds=search&ID=41527&cur_warehouse=CN
And the 250x80:
www.banggood.com/Heavy-Duty-Throat-F-Clamp-250mm-x-80mm-Welding-Quick-Grip-F-Style-Wood-Work-Clamps-p-1307243.html?rmmds=search&cur_warehouse=CN
nice
Hello, where did you purchase those magnets? I’m trying to look for the same ones. Thanks
www.amazon.ca/dp/B071ZKQ2X5/ref=cm_sw_r_cp_apa_i_msRCFbXYR7VZK
I found these. No matter the magnet, you may want to glue them in as well as using a fastener to prevent cracking. Rare earth magnets are very brittle.
oh, magnets, thats what those were?
You are amazing the things that you do im glad I subscribed to your channel 👏👏👏👏 what brill bit is that and what size
Rare Earth Cup Magnets
Genial.
Thank you 😊
Hi Metalist! What is the measuring tool used in your video is it a uniform measuring gauge? Thanks for the video
Yes its like a measuring gauge there is no specific name for it 😊
@@TheMetalist what make is it? I am in Europe and most I can find are flimsy looking
Slick. Nice Job!
Thank you 😊
What’s the name of that adjustable measuring tool you use a lot with a scribe please. It’s like a slide rule in a way. I’ve been trying to find one. Thanks
Soon on my etsy shop
와우 좀 따라하겠습니다 ㅋ
Очень интересная идея...
what are those round thingy you screw beneath the clamp?
Magnets
Здорово молодец,что за сверла по металлу направляющие. Спасибо.
Thx man awesome. Try a regular Skil saw and a carbide metal cutting blade if you haven’t. There only about $30
What kind of drill press do you have sir?! Great video 👌
Thank you 😁 its a Fein KBU 35-2
Mew Video Magdrill stand.
czcams.com/video/lvhwczDgNqI/video.html
That is good idea👍👍And your welding table is briliant. Can im ask abaut some details top plate dimension and what dimension is beatwine hols??
Chears
The base plate is a 6mm steelplate. The holes are 10mm with a 12mm thread in it. This way I'm able to be screw something in it, like a vise, all over the table.
The Metalist fucking genius. 👊🏾
Всё хорошо. Но прошу всех кто сваркой работает: Ставьте пожалуйста фильтр. Уже глаза от зайчиков болят, а выключать не успеваю. Danke schön😁
Very nice.
Nice work!
Can you tell me, magnet dimension?
25mm
👍
Does your magdrill magnet still hold on your table thru that vise base you made?
Not to the table but to the mag drill stand with the Vice.
What's the name of that measuring tool on 1:06?
At minute 1:05 which kind of marking tool is that and where can i find it? Thank you
Wow! Very smart clamping system indeed. What make is your horizontal band saw? It really caught my attention. Powerful engineering hand there!! Keep it up
Thank you 😁
Its a optimum Optisaw S100g
Where can I get that ruler you used to mark the plates. I usually use an adjustable square but that looks nice.
Good question do you have metric System, maybe i could orgenize you one!
What's the make and model of that sliding ruler that you use. I think I'd like one of those much better than my sliding combination square
Inch or mm?
@@TheMetalist My bad both metric and imperial
Metric is not a problem. Which Country you are from? I could send you some over, if you want.
@@TheMetalist Yes sir, North Carolina USA. Just let me know what I owe ya. My email is gearmannc74@gmail.com .
Thanks,
Chris
Gearmannc74@gmail.com sorry mistyped it.
Thanks,
Chris
Help me understand what the magnets are for?
That the clamp US not Fallingbostel over
Now that's awesome!!! Excellent job sir!!!
Thank you 😁
Nice job
Thank you 😊
It's good
pretty neat, but what were those things you stuck in the bottom holes? magnets?
Yes, that they don't fall over
Something tells me you will never have to worry about getting a job.
Not till now😅
Cool video and great idea! But you could slow down a little / no need to speed up this fast every part, it is just nice to see how things are getting formed :)
Thank you 😁 not the first who mentioned it ... is noted 😄
How thick is your table? Love these!
Thank you 😊
6mm but 8mm is also ok
I can never have enough clamps when welding with my everlast welder. Good video.
Thank you 😊
Wat kind of welding did you use? Tig mig gas???
Shadrach ALi TIG
I use Tig and Mig. My Favorit it Tig 😊
Come on man who has all those tools. Make something simple but good!
Great idea , subscribed immediately !
👍
Thank you 😁
Good work. may u send the tabel dimensions
Thank you 😁
Plans are coming
Учитывая трудозатрат и использованные станки, можно было не портить струбцыны, а изготовить из с нуля.
Hey Metalist Man, I cant work out what the round components do? It all happens so quick mate. Cheers
They are Magnets that the clamps are not falling over
The Metalist Yeh ok mate. I think that’s a great idea so you thought it through real good. It makes sense now! Cheers for that and keep up the good work.
@@TheMetalist Cool, I thought they were a bearing and couldn't figure out the purpose. Magnets make much more sense!
Я думаю это Дью угорает и это он сам сделал 😜
Might be ok if you’ve got a table with a load of holes in it