I UPGRADED MY STEERING WHEEL SETUP - NRG RACE HUB QUICK RELEASE
Vložit
- čas přidán 15. 03. 2019
- Buy Shirts, Stickers, Keychains & More: www.4BangersProduction.com
Subscribe for more! goo.gl/SsQExu
Don't forget if you liked this video to give it a "Thumbs up" and share with your friends.
Website: www.4BangersProduction.com
-Instagram: / 4bangersproduction
-Facebook - / 4bangersproduction
-Twitter: / 4bangersprod
Go follow these awesome companies,
K-Tuned (k-tuned.com)
JBREngines (jbrengines.com)
Clutch Masters (clutchmasters.com)
Drag Cartel (dragcartel.com)
SuperTech Performance (supertechperformance.com)
Hasport Performance (hasport.com)
AIMsportsData (aimsports.com)
Injector Dynamics (injectordynamics.com)
SpeedFactory Racing (speedfactoryracing.net)
TriState Motorsports
(onlinetsm.com)
Saenz Rods (saenzgroup.net)
Arias Pistons (ariaspistons.com) - Auta a dopravní prostředky
![Installing An Eclipse Aftermarket Steering Wheel in 5 Minutes [4k]](/img/n.gif)
That type r was a far superior steering wheel imo.
Back at it again! One of my favorite cars and you actually drive it. 💯
Thank You i stumbled upon this video.
Definitely getting the Race Hub, Quick Release, & Steering Wheel for an EASY MOD.
Should have purchased legit works bell quick release
This. I own both and the quality on the works Bell is far better than NRG.
Does the works bell quick have play like the nrg one in the video??
Tec 2000 Nope. No play whatsoever.
I've been hearing people say that. Might look into that upgrade.
Tec 2000 nope none.. I can second works bell is legit!
Wheel looks great in the interior !
Just a heads up I recommend getting different hardware for the steering wheel because the Allen tend to strip and come loose from wheel hop and launching the car
I used blue thread locker on mine when I installed my setup for that reason.
That was a great install love the videos
Epic instructional video. Thank you!
I’ve been following this build I can’t wait to do the swap on my lx, it’ll be a completely different car when I’m done with it
Great content! Following from Brazil
Suuuper clean dude
I commented on your Instagram post on this install, and I noticed in this video that your setup has the same play that mine does. I have a NRG 2.0 quick release hub with the 350mm Personal wheel. I found that the play seems to be in the wheel itself because if you set the hub down on a flat surface and push on the ring of the wheel, you get some flex out of it. But I mean, having the quick release hub probably adds another degree of play to the setup, too.
the type r wheel looks a little more racecar but this setup is sick too. i had a nardi personal in my e350z lovely wheel. dont recall if it was a 310 330 or 350 tho .
Great video man. I just saw that hub and wanted to see how it is. Thanks! And fuck that’s a beautiful integra.
Works Bell hands down!
That’s sick!
Nice. I used to have the same one with blue stitching in my EK.
what signals does the aim dash read with just can high and can lo spliced in
Will the Race /Short Hub work on my 2000 Celica GTS? I can't seen to find one that is compatible with mine :(
I know on the og quick release hubs the "safety" button can be removed so you can just pull the ring back and theke the wheel off.
Dammmm shit stupid clean 💪🏾💪🏾💪🏾
I got the JDM Mugen v3 how do I get the horn to o stay on?
Looks great! Awesome work! Hope to see the car in Georgia for I.A
What program do you use to edit videos?
Can u put the nrg lock on the new nrg hub
Is the race hub horn compatible?
I need a QR for my DC5 but nice 👌🏿
I deff gotta get one for my car, good vid 👍🏽
Go with the works bell setup, no play at all
Isaac Sellers I’m gonna check them out thanks!
Why not Sparco or Works Bell. You'er the only one beside me i have seen use the race hub.
My Nrg hub gets scratches Everytime I pull to remove steering wheel. Is it just me?
Nice 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
The grinta is my favorite. Very expensive though. So momo Monte Carlo because I'm cheap.
I got a grinta alcantera and it was pricey. Haha.
What’s the steering wheel link?
Surprised you didnt go with Works Bell.
Is that even safe? How does it not come off driving?
Kev Home Depot or Lowe’s sells black countersunk Allen bolts, would look way better
WorksBell?
wanna let go of ur itr wheel ? been looking for one forever
nice
You need Counter sunk hardware not the Button top screws. Unsafe!
Thumbs up so he sees this!
@@xXChaz9849Xx Lowe Rider's are The Fast &Furious 6.5.
You need black wheel bolts !!
Just take off that lil pin so you won’t have to worry about pushing down hard or pushing it at all to remove your steering wheel.
you want some countersunk screws for that wheel man, the screws they give you are for the part of the hub you aren't using to attach it to the short hub adapter you didn't purchase , just a heads up 😊
You are correct! I had ordered them and should be here soon.
@@4BangersProduction cool man, keep up the good work, car looks insane !
🎬💯👌
Does the race hub allow you to retain the horn functions?
I wanna know as well.
no
Not directly. I got a switch for mine. :)
I like that ITR steering wheel but I can't find myself to remove my oem wheel and loose the air bag.
I took mines out. It puts the wheel way to close towards me which makes it uncomfortable and it's too loose and shaky...
I run the nrg short hub with a 1in spacer in my ek civic and it's perfect for me. The car came with a longer ebay hub and a quick release and I had the same problem. Don't really like quick releases and car theft in my town doesn't really happen so I'm not worried
@@joeygonzalez2601 It wouldn't let me click on the read more icon, so I only read part of it lol
Coal mines or gold mines ?
I don’t know what this is 🤣👌
tune your Integra already! i wanna see pulls lol
Yea man never ending story lmfao
Works bell is the way to go, can't put a price on saftey. Not to mention possibly losing control of your baby
Isaac Sellers was thinking this the whole way through the video, running a full works bell hub/qr set up and i have no play. A lot of people trust nrg but not for me
Want to sell ur steering wheel
My works bell setup has no play at all , worth the extra dough imo
Link to a none flip up works bell quick release hub?
Evasivemotorsports
@@gmoneysowavy2336 unfortunately nobody sells something like NRG has made here. Works bell does not sell a racing hub like this, sadly.
Itr wheel >>>>> personal wheel
lol no ding
The button is a safety not meant for it.
SUBTITULADOO PLISS
Ok, that DEFINITELY shouldn't have engaged the bottom on its own just from pulling on it a little harder. That's most definitely a safety concern there. I'd be sending it back right away.
Ricer stile
I always think nrg quick release are junk.
i hear nrg and all others are trash except works bell products such as rapfix products are good.
Ricer CZcamsrs be like:
"UPGRADED MY STEERING WHEEL SETUP!!"
😂😂😂
In California is illegal
Zero Cool only illegal if you don’t have a working horn button. I got pulled over many times with my school buss heel and no issues
@@jorgeizDShiznit the muffler too I don't know but Cali sucks anyways now
Zero Cool if you don’t drive like a VQ 350z G35 owner then you should be good. I never been harassed or ticketed for being straight pipe