HPR: Harbor Freight 30 in. Shear Brake Slip Roll
Vložit
- čas přidán 29. 10. 2020
- How about this 3-in-one shear brake slip roll from Harbor Freight? This thing claims it can do it all. Can it back it up?
www.harborfreight.com/30-inch...
www.eastwood.com/eastwood-3-i... - Jak na to + styl
Just got one today great machine
Awesome! It's pretty cool, I think.
I've had mine for 3 years, and use it daily. I mostly use the break and shear, amd it's the most awesome, time saving tool I've ever owned. I use a magnetic light to help see my lines, and I score the metal deep. Especially for the break. By getting a deep score, I've found you can actually feel the score line on the break if you do it right. That makes it possible to get a perfect bend every time. But after a lot of use and abuse, it still works perfectly
That's great! I can see if this tool is tuned correctly, it should work really well. Just don't try bending 1/8 in. steel!
@@savingmiller lol.. I'd say 1/8" is a little on the thick side
@@savingmiller lol.. yeah, that's probably a little on the thick side.. But hey, if you figure out how to adjust it, let us know. I've been tinkering on mine for a bit, and still cant quite figure it out.. lol
@@ronnie9471 will it bend 1/16”?
@@ronnie9471I got mine dialed in and works best when there is practically zero clearance. I tried using 4-7% material rule for the gap, but had no luck. You just need to make sure your blades are sharp. Use whetstones to sharpen if not. And my center tension was cranked down quite a bit. I found that using a piece of paper as a test, for clearance; if it flawlessly cuts the paper, you’re good. If it grabs. Too much clearance. I can do 30” wide cuts on 20 ga mild steel. I think the tool steel is only rated for that. Getting accurate bends, you need to account for a bend allowance. You can google for clearance numbers, but there is also equations for you to figure out the offset to your bend. I hold a grudge against harbor freight but I really like this tool, had it for a decade. Hope this helps
I'm looking at the machine at harbor freight now it's around 600 dollars I'll get it still though I'm also eying the 4x6 band saw and 36in sheet metal bender for a small shop these tools comes in pretty handy especially when you have a creative mind nice of you to point out the good and not so good issues though
How is the cut edge quality with thin material? Does it leave any burr on sheet or drop?
The other one is the Shop Fox at Northern Tool.
Eastwood has one
Eastwood has this tool as well
Yup, for a premium!
Hi
Do you know what the maximum box depth is on this machine?
Thanks
Greg
Hi Greg, it looks like 5 in. is about the max. But if you are doing a small box you could probably get to 6.
@@savingmiller thanks
You can change the fingers around and get almost any break length you want by moving them around bundling different sizes together
princess auto...in Canada anyway ; )
Where do you live?
Do you think it would roll 3/8 steel rod
I rather doubt it. For steel that size you probably need a dedicated roller.
I doubt it'd do 3/8.. maybe 3/16 but that may be pushing it
I got one of these today on clearance you dont want to know what i paid for it
Emco makes one 30”
I should go find this factory and sell a Saving Miller brand!
Craftex has a model
Do you have a link? I couldn't find it.
This can’t be a true review tbh bc you said your barely use it. Eastwood has one much better quality/long lasting model if you can afford it. Harbor freight stuff just doesn’t last. The brake finger get get bent and the shear stops cutting after a couple months of use
The Eastwood is the exact same machine with an extra handle.
*Good old grease "zerts."*