I think I’ve watched this about 10 times fully through & still have no god damn idea how you do half of what you do😂 appreciate you putting this out man it’s helped me tons already & I learn more every time I come back lol
You're a fusion boss.. RE just doing the fillet on the flange.. took me a moment to work out how you selected all of the outside edges, by using the selection filter on just edges, but select through, and then used the intersecting selection window. i have learned something thank-you!
There should be a way to place 4 equal length lines to the center of each exhaust manifold port, lock the lines’ length, attach it to the center of each exhaust port (firing order) and tell A.I. to “give it a desired diameter without touching other primaries”.
I want to do something very similar for my Pajero, but I can't find the collector flange for it.. do you have time to (and feel like) helping me out? I already modeled the flanges for the exhaust/turbo and put them in the right place in space...
I'm not sure if I was able to see it or not because of the zoom, but how do you know they're equal length? Was that just by measuring each segment in the sketches and putting them together?
iI seems like you are using random radius bends to construct the runners.. you can only manufacture from set radius bends especially when fabricating a turbo manifold like this as you would usually be working with schedule pipe cast elbows which only come in 2 or 3 set radius for any given diameter.
He does use a set radius for the bends, 47,5mm centerline radius is about right for a 36mm elbow. You can see him setting up a parameter to constrain the radius in the beginning of the video (4:15). What I'd do however is I'd also make it so that the elbows and straight pieces intersect at either a 45 or a 90 degree angle as often as possible, just to make the fabrication process a bit easier
um with this video its totally useless and with step by step commentary which that would help others would be helpful . this vide is pointless to learn its sped up to fast and to hard to follow i just gave up in the end redo it .
I think I’ve watched this about 10 times fully through & still have no god damn idea how you do half of what you do😂 appreciate you putting this out man it’s helped me tons already & I learn more every time I come back lol
I'm just now seeing this but check my channel it might help!
You're a fusion boss.. RE just doing the fillet on the flange.. took me a moment to work out how you selected all of the outside edges, by using the selection filter on just edges, but select through, and then used the intersecting selection window. i have learned something thank-you!
Awesome work mate!!
thanks for that, i was trying to make something like that for long time and i have no idea how to do it
Any chance of getting some commentary/notes on the tools you're using at various steps in f360?
There should be a way to place 4 equal length lines to the center of each exhaust manifold port, lock the lines’ length, attach it to the center of each exhaust port (firing order) and tell A.I. to “give it a desired diameter without touching other primaries”.
Is there a video on desiging the merge collector itself?
I want to do something very similar for my Pajero, but I can't find the collector flange for it.. do you have time to (and feel like) helping me out? I already modeled the flanges for the exhaust/turbo and put them in the right place in space...
How are you selecting two lines and then putting a circle on that plane?
I want this video but in solidworks.
how did you make sure that all the pipes where equal length?
that's what i was wondering also
is there a file we can access for the collector?
I'm not sure if I was able to see it or not because of the zoom, but how do you know they're equal length? Was that just by measuring each segment in the sketches and putting them together?
I used the addon mST SketchTools, which allows you to directly measure the length of a chain.
Look at 17:00
Is this file anywhere?
he is able to do sketch in the air wtf
iI seems like you are using random radius bends to construct the runners.. you can only manufacture from set radius bends especially when fabricating a turbo manifold like this as you would usually be working with schedule pipe cast elbows which only come in 2 or 3 set radius for any given diameter.
He does use a set radius for the bends, 47,5mm centerline radius is about right for a 36mm elbow. You can see him setting up a parameter to constrain the radius in the beginning of the video (4:15). What I'd do however is I'd also make it so that the elbows and straight pieces intersect at either a 45 or a 90 degree angle as often as possible, just to make the fabrication process a bit easier
um with this video its totally useless and with step by step commentary which that would help others would be helpful . this vide is pointless to learn its sped up to fast and to hard to follow i just gave up in the end redo it .
it aint no tutorial