Pulling Frame on a New 2019 RAM Truck! (Part 4)
Vložit
- čas přidán 30. 06. 2024
- Hi Everyone, in this episode you will see how we fixed the frame and body damage on our 2019 Dodge RAM 1500 that we bought at Copart auto auction.
Thank you for watching!
Don't forget to Subscribe to the channel so you don't miss out our new projects!
-Instagram: / rush_in_garage
-Email: rush.in.garage@gmail.com
#newram #2019ram #rushingarage - Jak na to + styl
Outstanding work. There ain't nothing RUSH IN GARAGE can't do! Hard work, attention to detail, all while teaching us. One sharp looking truck. Thank you for sharing your build's with us.
I'm so pleased that you showed the problems you encounter, some only show how easy it was to repair, but you show the problems, your frustrations and how you resolve the things that you come across. Well done, and the truck is looking good.
She put up bit of a fight for her face lift, glad to see y'all got her back in shape. She's coming along nicely, looking forward to the next episode. Keep up the great work.
Good work that truck really fought you I was impressed by your new gadget a really good investment..can't wait for the next episode
Everyone who’s watching this video knows what is going on. Me? I enjoy watching skilled craftsmen doing their thing. Thank you for the explanations 😲.
Good work boy's just goes to show that what looks like a straight easy fix can sometimes bite back. Well done for sorting it out and at the end of the day you'll have an all but new truck. Gary..... England 🇬🇧
Very good video guys. Very informative and you explained what you did very well. Love the channel.
I put wooden blocks under the truck to keep it level and stop it from flexing that will give you more pulling power and change down better
Thank you for the video cant wait till the next :-)
Great job guys cool to see it get it back in to shape
Good work, If I every need body/frame work on my 2019 Ram I will bring it to you guys.
Good workmanship cuz.I appreciate your narrative and skills keep up the good job. Jah Blessing much love.
just subscribed today great video content love it actually seeing stuff been done, your a gifted man
Great move rebuilding that old frame machine. You couldn't have done this job without it.
Nice work ! Dont forget to use cavity wax on all the inside panels you weld or bring on !
Thanks for giving us the pulling details using the tape measure. That was interesting to watch. Also looks like you're getting good value from the dent puller.
The dent puller is pretty sweet! Saves a good amount of time
Good job guys! That ram was giving you a hard time. Sometimes you have to walk away and come back.
Nice job figuring that all out but that just shows the level of experience you guys have that while it took a bit to get it all figured out that you took the steps to check everything and tweak what needed to be done to get it back so everything all lines up, but honestly if they did that at the factory, man that is brutal. I was starting to wonder if someone had bought it doctored it and threw it back in the auction, lord knows it wouldnt be the first time that has ever happened, but its hard to say without diving into the vehicle history but there isnt any guarantee to show that it could have occurred either.
Hats off to you guys for taking the time to get it right, but doing a quality rebuild just adds to your reputation as a seller and it definitely makes people have no hesitation about buying from you again or recommending you to folks
A lot of shops would have given up on that job, but you two being you persevered and made sure it was right before moving on.
Another well done job guys.
Great job guys!
good professional work! he used no heat at all!! this is better than some 1 using tow ropes to pull a truck. if this guy keeps up the good work in 20 yrs he will be a expert.
Great work guys. Was looking kind of rough there for a minute, but you guys don't give up and I like the fact that you will walk away for a bit and rethink how to solve the issue.
Nice job on getting it done.
nice end hard work ... congratulations!
Starting to look good
You are a artist with metal
Good work guys
Best CZcams ever
Grate video can't wait for no 4
Good video on what not to do.
Everything that could be done wrong was done here.
Good stuff.
Nice attention to detail. Any job worth doing is worth doing right.
Awesome video and excellent content
Very Nice Work........
I have bought a 2019 RAM. The dealership told me that a hard hit in the front end will drop the engine to the ground, so it will not go into the fire wall. More money for the Insurance companies. Nice job young men and thanks for sharing your experience.
Slawko Wegrzyn most modern cars, 2000+ are designed for the engine to go down and back in the event of a severe front end collision.
You need to borrow Arthur's Thor hammer to take care those frame bends! Lol. Good job!
Lol yep sometimes you just need a big hammer 🔨
Nice work
The 4 people who disliked you are not nice that is very rude he just started CZcams that’s rude.still good videos can’t wait for the next one!!!
Sometimes the "simplest" jobs turn out to be a nightmare. It happens. Y'all still knocked it over so....good!
Amazing work, fellas. You guys are like repair detectives. Kind of stressing when you discovered some suspect work from the factory 19:00 in the video. Yikes!
Did you get the frame rail pulled down? If it’s not insurance work I’d heat the rail and pull it down cause it was definitely up and twisted according to the laser.
Hey good job sir, do you have a link or some info on the resin and hardener you used to repair the radiator support?
I watched and looks great!
I bought a Taco from a dealer who bought it from the auction.
I has a frame damege behind the front passenger tire. Some people who work fixing cars said it need a new frame because the bent is difficult to bring it back and it wouldn't pass the alignment.
it is like half inch bent. Looking this video make me think they just don't have a great skills and right tools for work on it.
Where are you located btw?
Can I send you some pics or video call?
Thanks.
Longer vids nice work
Have you ever replaced the frame horn and fender rail ? I need to do mine on a 2019 Laramie. I’ve done fords but never Rams
Heat the rail up with a torch. It would make that iron more flexible and pull it while it’s still warm
HAVE a question for you. 2016 Dodge ram with Minor damage from a telephone pole on the driver's rear. The bumper has been replaced but seeing a little height difference in the height. Passenger rear sitting 2 -3 inches higher than the driver's side. I checked the coil springs to make sure they were both seated correctly. I think there might be a little twist in the frame. Suggestings?
So after you pull a frame, and after the problem that caused the frame to deform, isnt the metal weakened? Can a frame be restored to factory specs? How do you know that the frame's damage is bent back, as opposed to another area of the frame being bent?
You the best
Always expect for the wrost if you think it’s going to be easy it won’t promise you that in auto body. This what do for living also it can be a pain in the ass.lol love frame it’s fun but can be stressful being on commission base
What video camera equipment are you using to film an episode on your CZcams channel?
One of the things i like best about you two is your conscience. You guys care about doing it right and it shows every video, and yes, i’ve watched them all. Looking forward to the next vid in this series.
where you got that spot dent puller? I found the generator but not the gun hammer.
Seem a great job ONE IMPORTANT QUESTION? What the name of that frame machine need to buy me one like that?
How much would this frame fixing cost to a customer? I've been eyeing some frontend accident vehicles and trying to figure budget. Thanks
DONT BE AFRAID OF PUTTING PRESSURE, IT IS A CONVENTIONAL FRAME! CHECK FOR DIAMOND IF YOU KNOW WHAT THAT MEANS?
Yes we checked for diamond on the frame and it measured out straight
you need to have your pick up set an on the frame brackets and not on the tires that is why your pulls don’t have any effect!.
Hope that windshield is cracked because grinding and weld burns glass
You do a great job on all the vehicles you work on . Keep the videos coming guys
Good morning, are you satisfied with spotter welder? It sure looks like the answer for sheet metal dents. We made laser poles like Arthur uses, really enhanced our work. Great video, you take care.
Yes I’m really happy with it. I think it’s really going to help out with speeding up repairs and having to use less filler for a better quality repair
My 2019 Ram 1500 Limited got T-Boned in the Passenger Side between the right wheel and the cab, Knocked the hell of it. Can they fix it if the frame is bent?
DUDE YOU MADE HAMBURGER OUT OF THAT CAB SIDE! YOU EVER HEAR OF USING A PRY BAR FROM UNDERSIDE!
Great video, can't wait for the next one.. Any regrets on buying this ram?
No we think it’s still a good buy. It’s like most cars from the auction there’s always some kind of damage that wasn’t seen in the pictures when you buy them.
@@RushinGarage nice, can't wait to see it finished up.
I need this done on my honda coupe, how much would repair cost?
Still making junk so glad i love my Honda Civic.
Can you make the anchoring clamp
Did you find that cab moved any??
What kind of spotter are you using
Hey guy where did you get the tool you used to get the dents out in 7:36 ??
Amazon
For the people who have never been n around frame work and straighting. Your seeing what deers look like when they see headlights. With crickets sounds in the background. Never was shown the passenger side rail lined up or much else? Not trying to hate but if your making videos looks like need to pick something easier . I'll look at some of their other videos.
How much did you get this ram from the auction ? $$$$
What’s the name of the laser you’re using?
20:18 safety glasses 🤓
You need heat man
How much did you buy it for ?
as the old saying goes, if frame bent junk it it never be save again
You two guys never cease to amaze me with your accuracy, even better than the maker of this vehicle.👍🇬🇧
what happened to the shutters?
👍👍👍👍
What used to called the apron Ram calls cooling rails now and they're weak. I've built several of those pain in the butt to get perfect. Gonna be a nice truck when you're done though guys!
Yea they are!
I’d be crying wonder how much the truck cost at auction
Where can i buy that auto frame machine?
What dent puller is that?
where are you locate fam.,.
You're not the first bodyguy to mention how poorly made new cars and trucks are. The metal just seems so thin nowadays, am I right? But hey dudes, excellent job, as usual!
Yes the sheet metal is like a civic. 😞
I agree with you much thinner but alot stronger than you would think you seen how much trouble he had pulling it out
How much would you charge for a job like this?
looks like someone saw the damage stole the tires and wheels put some lipstick on the pig and ran it back through copart
how much did the dent pulling tool cost?
He got the hammer from amazon but the generator he got it from eastwood. How he made that conversion I have no idea. See below:
www.eastwood.com/mig-welder-110vac-135a-output.html
www.amazon.com/HYDDNice-Welder-Puller-Welding-Pulling/dp/B07W6TVBXW/ref=pd_sbs_469_1/137-6083549-7793313?_encoding=UTF8&pd_rd_i=B07W6TVBXW&pd_rd_r=caeee6df-3b03-481d-b238-83cf83a998a3&pd_rd_w=N17GX&pd_rd_wg=yC44U&pf_rd_p=d28ef93e-22cf-4527-b60a-90c984b5663d&pf_rd_r=MS1BQBHWY3V652ZB9VR0&psc=1&refRID=MS1BQBHWY3V652ZB9VR0
www.amazon.com/dp/B07SR86NGD/ref=sspa_dk_detail_3?pd_rd_i=B07SQ7M8FS&pd_rd_w=0Cd1F&pf_rd_p=48d372c1-f7e1-4b8b-9d02-4bd86f5158c5&pd_rd_wg=StEUq&pf_rd_r=PNYM53H9ZSGGF6DRAK7K&pd_rd_r=515cd77c-5c51-467c-b6c1-9661a969f645&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExNU5aR0IwNFlBMjdXJmVuY3J5cHRlZElkPUEwMjgwMTQ4MVJJWlFIOUo4SDY2JmVuY3J5cHRlZEFkSWQ9QTA2MzM5MTRMUEFVMVNDN0g4NUgmd2lkZ2V0TmFtZT1zcF9kZXRhaWwmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl&th=1
Since I am a physics professor, I will let you on a little secret, if all interconnected, when one goes all follow.
Was this a third party sale or a insurance company it kinda looks like it was half repaired in another body shop and they just sent it threw the auto auction maybe not but seemed like it ?
It was an insurance company
What's the name of the tacking and pulling welding machine?
Vevor Spot Welder
pull up ! lol
I'm surprised they didn't just total it with so much damage.
It’s a copart truck meaning it was totaled and they bought it from the insurance company at auction.
Dodge where quality is job none.😂
Your engine probably moved a little bit also
It was built on a Friday😆
not to be a safety Sally . when working with hydraulics , chains , clamps please wear safety glasses . know a good friend who lost his eye when a screw driver slipped . be blessed . yep that left side bullsnot could have came from the factory . Never buy a vehicle that was Built on Friday because they can smell Beer Thirty
What’s the name of the music on 13:40??
Yikes that sounds strange
Where'd u get that hat ?
One of the places we get parts at they gave them to us awhile back.
@@RushinGarage I'd love to buy one
At least use some safety glasses, todays youth that still have use of both of their eyes, hmmmmmmm
Like brain surgery so many parts