Video není dostupné.
Omlouváme se.
How to use a Basin wrench to fit a tap. ABDtools
Vložit
- čas přidán 5. 09. 2012
- *** Please visit our website ***
www.abdtools.co.uk
*** Follow us on Twitter ***
/ abdtools
** If this video was helpful, please like our Facebook page **
/ 192521010843052
***********************************************
Video showing how to use a basin wrench to fit or remove a typical single water tap to either a washbasin, kitchen sink or bath, showing the underside of the sink.
Fine and easy. Except that the half inch basin wrench does not fit the polypropylene tap nuts supplied with many taps. e.g. plumb sure quartz gain taps
The nuts are oversized.
Throw away the plastic nut and replace with brass nut use a centralising washer between the underside of the basin and the brass nut and tighten the nut with a box spanner do not follow this video it is a very poor example of fitting a basin tap