A cheap fix for the slop is get 3/4 conduet from electric department. Put a cut down the side and beat on. Or buy 1 inch still cut down side and fit small pieces in
The blade arms have the same size hole as the mounting brackets. The bushing goes through all three. The cylinder bushings were 2 pieces because the cylinder had a bushing already. Hope that clears things up a bit.
I really appreciate your efforts to make these videos! Everyone that owns one of these needs to be subscribed to your channel. I'll definitely be checking the fitment on mine. Thanks again, Papa!
Thanks, again, for showing what can easily be upgraded. The machine will be a lot more durable, now. I love your show.
awesome work
A cheap fix for the slop is get 3/4 conduet from electric department. Put a cut down the side and beat on. Or buy 1 inch still cut down side and fit small pieces in
How did you get the blade back on with a pass through bushing? Looks like the bushing needed to be 2 pieces or am I missing something?
The blade arms have the same size hole as the mounting brackets. The bushing goes through all three. The cylinder bushings were 2 pieces because the cylinder had a bushing already. Hope that clears things up a bit.
Very nice video's on the micro mini, is the bolt then a 24mm? and do you have a store front web page for the bushings? lol very nice.
No store front. I just do my own parts. Don't know what size the bolts are but the out side of the treads measure bout 22mm.
I really appreciate your efforts to make these videos! Everyone that owns one of these needs to be subscribed to your channel. I'll definitely be checking the fitment on mine.
Thanks again, Papa!
A great idea but won’t the grease fittings spin around? Not sure if you could have oversized slightly but still better than it was.
When society collapses, every rogue bunch of tribes will be looking for a man with your skills and experience. 😂