Rolex GMT Master obtained for nothing Is it real? can i fix it?
Vložit
- čas přidán 12. 07. 2023
- ただ同然で入手されたロレックス GMT-MASTERだそうです。
かなり状態は悪いのですが、果たして本物なのか?修復できるのか?
【参考動画】
●洗浄について
• How to Fight Damaged W...
3分ぐらいから
●エピラム処理について
• 【Eng sub】アンクルやガンギ車以外もエ...
●アンクルについてのアドバイス
• 【Eng sub】commentary : ...
●アンクル爪への注油
• Experiment: What chang...
●筒カナのカシメと緩め方
• Commentary How to crim...
●セイコー自動巻ゼンマイ油は使わないで
• 【Eng sub】緊急連絡! 拡散希望!! ...
● 【Eng sub】Commentary How to replace the glass windshield in the ring 解説編 リング付きガラス風防の交換 割りと時間と手間がかかります
• Eng sub】CommentaryHow ...
【ご覧頂きたい動画3選】
●調子の出ない時計と戦った3日間の記録
• 調子の出ない時計と戦った3日間の記録
●解説編 精度保証が難しい時計とオーバーホールをお受けしていない時計を正直にお話しします
• 解説編 精度保証が難しい時計とオーバーホール...
●解説編 自動巻時計の手巻は極端に言えば使わない方が良い
• 解説編 自動巻時計の手巻は極端に言えば使わな...
#watch #repair #assembly #overhaul#antique #old #時計 #機械式 #修理 #レストア #restoration #オーバーホール #組み立て #ノーカット #rolex #gmt-master #1570
Welcome to the AnyTimeWear channel.
Watch this channel for uncut watch repairs, overhauls and assembly.
Also, from time to time, you can watch a video of my hobby, golf.
大阪のアンティークウォッチのエニタイムウェアです。セイコーやシチズンなど国産時計を中心に販売、修理やオーバーホールなどメンテナンスをさせて頂いています。このユーチューブでは、ご依頼頂いた時計オーバーホールの組み立てをノーカットで見て頂こうと言う暴挙に出ました。ぶつぶつ独り言を言いながら組み立てておりますので、眠れない日とか、暇な時にご覧頂ければ幸いです。
www.anytimewear.jp/
それと趣味にしているゴルフ動画を時々ご紹介出来ればと思っています。
2020年より53歳のリスタートと奮起しシングルに向けて取り組んでいます。
そして、2022年10月にベストスコアが80になりました。
素人ゴルファーだから、スイングに悩んで来たから、お伝えできる内容があるんじゃないかと「スイング理論」も公開しておりますので、合わせてご覧下さい。
www.anytimewear.jp/menu_golf.htm
音楽素材
効果音ラボ
soundeffect-lab.info
音楽: Mes(s)merized
ミュージシャン: Philip E Morris - Jak na to + styl
自分でやったら絶対パーツ無くすし、なんなら部品が余るw
こういうの直せる人ほんとすげえ。
時にネジが1本余ったりします(^_^;)。
でも、直ぐに分かるんですよね。
記録のための撮影はCZcamsでなくても、されると良いかもですね。
Holy cow! That was one of the best videos I have ever seen on Rolex repair. Your work is amazing.
It's the best compliment.
thank you.
I think the work content is normal, just because the clock was overworked.
部品再組み立ての時、息を止めて見入ってしまいました。
分解と洗浄でニヤニヤし、組み立てでワクワク、完成でドキドキ。
何度見ても楽しい動画です❗
何度もご視聴頂きありがとうございます!と言う私も何度も見て反省してます(^_^;)。
私の母の友人のご主人がロレックスも修理できる職人さんでした。私の腕時計が調子悪くなるたび、良く直してくれて下ったのですが、細かい作業とは存じていたけれど、この動画を見て、改めて尊敬と感謝の念を伝えたいと思いました。私自身、製造業に従事しているのもあり、この様な作業をできる方にはただただ敬意を持って頭を下げさせて頂きたいです🙇♀️
昔は、どの町にも時計店が有って、店主が時計士だったんですよね。代替わりで店主が出来なくなって今日に至ります。細かい作業ですが慣れるものです。
ですが、お褒め頂きありがとうございます。
Wonderful job with this restoration. 👏🏽
thankyou
あの汚なくくすんだ時計がキレイになっていく様子がめちゃくちゃ気持ちいいですね。さすがウォッチマイスター。良い動画ありがとうございました😀
ご視聴頂きありがとうございました!
It really turned out beautiful! congratulations.
Thank you
貴方様の器用さもさることながらその各パーツを造る職人技術も感心致しています。
Hard to believe it’s the same watch. That thing was trashed on the outside, but the movement still looked great. Nice job bringing it back to life.
Thank you very much
昔は腕時計好きで、ゼニスやホイヤーを集めてましたが、今は気楽なスマートウォッチ使いになってしまいました。
この動画で改めて機械式の素晴らしさを感じました。
コメントありがとうございます。
今は携帯電話もありますからね。
機械式時計は、メンテナンスして行けばいつまでも使えますし、世代を超えて引き継いでいけるのも魅了かと思います。
ぜひ機械式時計にお帰り下さい(^_^;)。
Turned out great! Fantastic work!
Thank you very much
初めて拝見しました。
とにかく何もかも凄い人ですねww
素晴らしい動画!!
コメントありがとうございます。
作業内容はいたって普通なんですよ(^_^;)。
とても素敵な動画、ありがとうございました。
こちらこそ、ご視聴ありがとうございました。
Great job! Respect from Croatia!
Thank you for your comment from Croatia.
Lovely work. Very nice to see an old watch working again.
Thank you for your comment.
Watches that have stopped working naturally can often be revived with just an overhaul.
素晴らしい技術ですね!
ありがとうございます。
Just started following your Chanel! Loved your work. This watch is one of my favorites GMT 1675. Best of luck
凄い‼️見入ってしまった😳
ありがとうございます。
Crazy good restoration. Keep them coming!
Thank you very much
素晴らしいです✨
ありがとうございますm(_ _)m
まじで職人さんってすげー!
カッコ良すぎるこの人!
リスペクトします!
即チャンネル登録しました!
ありがとうございます!
作業内容は、至って普通ですが、時計士の仕事に興味持って頂けたなら幸いです。
ありがとうございます。
今後も動画見させていただきます!
毎回楽しみにしています!
Amazing work 👏👏👏
Thank you
綺麗❤
I just wanted to take a moment to say how amazing your video was! I was really impressed with the quality of the footage, the editing, and the overall presentation. You did a great job of explaining the topic in a clear and concise way, and I learned a lot from watching your video.
I also really appreciated the way you made the video engaging and entertaining. You kept my attention throughout the entire video, and I never felt bored or lost. I would definitely recommend your video to anyone who is interested in learning more about the video.
Thanks again for making such a great video! I look forward to watching more of your content in the future.
PS: I outsourced this feedback to AI.
Do you personally know the watch restorer who made this video?
@@busterbiloxi3833 no
素晴らしい動画です時計極めてる✨✨見入ってしまう👀
コメントありがとうございます。
Such an incredible score. I hope to find a vintage Rolex in that condition one day so I can restore it myself.
A Rolex that has been used so much may not come out easily. i think i was lucky.
@@watchrestorationanytimewear is it fake Rolex ?
By the way ,where did you get the spare parts
i like his overhaul job without polishing. vintage watches are not brand new shining watches so keep scratches are much better looking.
I agree.
In some cases, the balance is better if the windshield has scratches.
You have the hands and patience of a skilled surgeon. I could watch your work for hours. Thank you!
Thank you very much
時計興味無いのに何故か最後まで見てしまった。一番最初にこの機械仕掛け考えた人天才ですね。
興味のない方に見て頂けたのが逆に嬉しいです。
コメントありがとうございました。
Nice work!!
Thank you
素晴らしい、有難うございます
コメントありがとうございます。
綺麗になっていくの気持ちいいです。
と、夜光塗料ってこうなってるんだ‼︎‼︎‼︎😳
ご視聴ありがとうございます。
この頃は、トリチウムが使われてたそうです。今の夜光塗料は蓄光です。
Amazing video! Your skills are top tier.
Thank you very much
Great restoration... I've seen some people on youtube have been able to colour match the new replacement lume on the hands with the patina'd lume plots on the dial.
Thank you for your comment.
This time, the index was not uniformly discolored, so I proceeded without making too much trouble.
凄い!
まさに「ザ・職人」ですw
電池交換くらいしかできない自分には神業です!
尊敬します!
ありがとうございます!
Very nice restoration great skills shown,question was this a 1575 movenent ? Thanks
It's a beautiful Rolex.... perfect hands...so beautiful.
Nice job! Which tool did you use to crimp the canon pinion? Bergeon tweezers, which number? Where did you get your new parts from? Glass, gaskets, bezel inner, etc? Thanks.
thank you.
I thought that the rotating bezel was also worn out, but it was good that the ring was also left.
BERGEON4733 is used for caulking of Canon Pinion.
After that, I use generic parts.
Wow! Great job! You're a master!
Thank you very much
素晴らしいです!
一つ質問ですが
文字盤の塗料塗り替えと竜頭の交換はあえてしなかったのでしょうか?
ありがとうございます。
できればオリジナルのままが良いでしょう。
必要とあればリダンとリューズ交換はいつでもできますからね。
I enjoyed watching this video and your skill. I will subscribe to see more of your work. If I may offer a couple of suggestions, it would be interesting if you could add some more details of the different stages, and I would have liked to see the bracelet restored, shinning and polished. I think that, together with the new bezel, would have worked wonderfully as you were giving a 2nd life to this great watch. In terms of the video itself, since we don't have many comments or descriptions (though we appreciate the written notes), I suggest adding some soft music in the background. I think this would enhance the pleasure of watching your work, and complement perfectly the video. Anyway, I congratulate you and wish you success.
Thank you for your comment.
I will refer to it.
Respect from the United Kingdom 🙏
Thank you
素晴らしい技術ですね!😮
ありがとうございます!
機械がしっかりしてくれてたので助かりました(^_^;)。
@@watchrestorationanytimewear 機械がしっかりしていてもこんなボロボロ、余程の愛情と知識が無ければ。😊
機械式腕時計が何故一生物と言われるかが感じられる動画、とても学べました。
カッコよすぎる、こんな手さばきになりたいなあ
ありがとうございます。
時計は見事な痛み様でしたが、作業は一般的な内容ですよ。時計士の守備範囲は広すぎます(-_-;)。
good looking watch! im happy to see you didnt over restore the case and bracelet. i do wish, however, that you would have left the hands in the original condition asside from repairing the gmt hand lume. I would also try to find a faded bezel insert to match the rest of the watch's patina.
all in all though, great work and nice video!
Sublime workmanship😊
Thank you
Awesome job. You probably know what you are doing, so don't take offense, but me personally I would definitely check if the old lume on the hands and dial is radioactive on such vintage pieces. If it is radium or tritium it could be really dangerous what you did, removing the old lume like that.
Turned out super nice tho.
Stay safe
Thank you for your advice.
There is also information that the effect is smaller than the X-ray photograph.
I would like to measure it if there is an opportunity.
Ha! Ha! Ha! That's a ref. 1675. No need to worry about radioactivity...
Looks like it belonged to a murder victim, buried in the woods!
@@anderspedersen7488
Maybe a real adventurer used it up?
Bravo, Sir.
Grazie
ロレックスがなぜ高いのか、納得できる映像。繊細で美しい。あの小さい部品ひとつひとつに役割があって、絶妙なバランスで動いていると思うと神秘的で感動する。それを修復できる人は神の手を持っていると思える。
コメントありがとうございます。
小さくても代替えができない部品ばかりです。
ゼンマイのトルクは大きいのですが、1秒に5振動や8振動するので最後の部品は小さな力で動いています。なので小さなホコリひとつが歯車に引っかかるだけで時計は止まるんですよね・・・。
仕事は慣れなので決して神の手ではありませんよ。でも、うれしく思いました(^_^;)。
器用な方ですな。時計もまた使われて嬉しいでしょうね
コメントありがとうございます。
作業内容は至って普通でしたが、元の状態が酷かったので…。
お客様に喜んで頂けたので良かったです。
Lovely video very entertaining 👍thanks
I hope you enjoyed it
職人さんだとあのゼンマイの組み直す順番が分かるんですね。きれいになると気持ちいい!
単に何度も組み立てことがあるからですよ。お初の時計だと分解時に写真を撮ったりします(^_^;)。
おもわず 見入ってしまいました👍 お見事です😁
ありがとうございます
ÓTIMO SERVIÇO 👍👍 🇧🇷
obrigado
Great job.
Thank you!
Despite the overall battered state of the watch, the clockwork itself seemed very well preserved, testament to the robustness of these watches.
I agree. Moisture probably entered from the windshield side, but there was almost no damage to the machine.
This video was very satisfying.
Thank you
中身が何より美しいと感じました。
所有していても内部構造を知らない人は沢山いると思うし中を見る機会があれば更に愛着がわくに違いないですね。
コメントありがとうございます。
オーバーホールの見える化の一貫でCZcamsを始めました。
ご自身の時計が組み立てられる様子って、まず見ることは出来ませんからね。
Nice Job 👍
直してまで使いたいのは良い製品ですよね。しかし梱包の丁寧さよ
ネコポスでしたがね・・・(^^;)。
レターパックもそうですが保証がついていないので送られる時は注意が必要です。
あんなボロボロだったのに、こんなにきれいになるんですね。すごい技術(^^)
外装のダメージはかなりありましたね。
ただ、アンティーク時計の風防を交換すると、かなりイメージが変わるものです。
👌🏻 Fantastic restoration, also trying to keep as much of the original piece as possible. Saved from the confines of a drawer or cupboard to be forever forgotten & unappreciated for the many hours of craftsmanship that went into creating this timepiece. Massive Respect for your skills, know how & craft to bring this horological wonder back on a proud owners wrist. Hopefully future custodians will wear it with pride and care for it as it deserves for the next century.
Again, bravo Sir 👏🏻👏🏻
Thank you for sharing the rebirth of a deserving giant in the watch world 👌🏻
Thank you for your comment.
Opinions differ as to how best to restore an old Rolex. So I realized once again that it is difficult to judge. The content of the restoration is tailored to the client's wishes, but I also felt that I needed to learn more.
ロレックスは!世界中に?職人が?居るのかな。😊?
Aprendi apreciar restauração de relógios. O SR É UM MAGNÍFICO RESTAURADOR de relógios parabéns SUCESSO 👏👏👏🎇🎇🎇
Obrigado por assistir e comentar.
Tive a sorte de que a máquina não tenha sido danificada.
Wow you got this fr free amazing 😍 in jealous.Another great video Thant you so much ❤
Thank you very much
But the lucky ones were the clients
Love the video and content
Thank you very much
素晴らしい、技術ですね。🎉
ありがとうございます。
Amazing talent
Amazing work. I do not know why it was so well packed 😂
thank you.
This is probably because the client is studying watch maintenance.
素晴らしい😊
ありがとうございます!
I love that you didn’t polish it. That patina tells the watch’s story. 👌🏼
I also think it's better not to polish it in order to preserve the overall atmosphere.
A beautiful and timeless piece for sure
Are you talking about watches or videos?
Either way, I hope so.
Thank you for your comment.
What a remarkable restoration. Would you please restore my 1963 Autavia?
Not a patina guy , I like a fresh start and another life ! Great work !
We received various opinions about Hands (^_^;).
Thank you for your comment.
respect for your skills, thanks for sharing....
I think the repair work is normal, but I did my best to edit the video (;^ω^)
Would have be nice to polish the case and replace the wrist band…. Beautiful mechanical work! Bravo!
Thank you for your advice!
とても興味がわく動画でした!僕も自動巻き、手動巻きの腕時計を直してみたいと考えてます!概要欄の’タダ同然で入手した’ということが気になったのですが、もしよいのであればどこから購入したのか教えてほしいです。
コメントありがとうございます。
当チャンネルは、基本お客様のお時計を修理、メンテナンス、オーバーホールさせて頂いている様子を動画でご覧頂いています。
こちらのお時計は、お客様が根気良く骨董市巡りをされていてジャンクの山の中から、本物かも分からない状態で入手されたそうです。よって、このお時計自体にお値段は付いていなかった様です。
初めまして。
私も時計修理士をしています。
アンティーク時計は未経験なので質問していただきたいのですが、トリチウム夜光の崩れているものは吸い込んだり素手て触れても問題はないのでしょうか?
時計に使われたトリチウムは、極僅かで放射線がガラスを通すほどもなった様です。レントゲンなどのほうが数値が大きいと聞いています。
さらに半世紀経過していますので光りませんし、ほとんど放射性物質は無いと言えるかもです。
でも、注意した方が良いでしょうね。
@@watchrestorationanytimewear 丁寧なご返答をありがとうございます。
ピンセットなどの工具越しであれば特に危険性はないのですね。
気になっていたことなので質問ができる方が居て良かったです。
話は変わりますが、私自身、以前から勉強のために動画を拝見させていただいていたのですが、とても参考になり、助けられています。
ありがとうございます。
これからも動画を楽しみに待っています。
師匠にする人間違ってるよ。素人に毛が生えたような作業です。
@@user-ob8go2xc4u コメントありがとうございます。
動画主さんに限らず、職人には癖があると思います。
実際に現場で色々な人の作業を見てきましたが、それはダメだろと思うやり方をする方も居らっしゃいます。ですが、私がそう思っただけで他者から見るとそれで良しとするのかもしれないので、受け取り方は人それぞれかと。
訂正としては、動画主さんを師匠とはしていないところです。どうすれば効率が上がるか等を参考にさせていただいています。
長文失礼いたしました。
@@user-ob8go2xc4u
コメントありがとうございます。
厳しいコメントですが、そうですね。
まだまだ経験が必要です。
Always learning. Always watching. Subscribed 👌
Thanks for watching
And thank you so much for subscribing to my channel
Wow! Great job returning this crashed GMT back to life. I wonder why you did not replace the tube and crown with new stock as Rolex would have done ?
thank you.
I was instructed by the client to replace only the bad parts as much as possible. And the crown can be replaced at any time.
Just curious, but why not polish the case and band links? Also, could lume have been reapplied on the dial.
This is the client's property, and we only work on repair items that have been requested.
ヴィンテージGMTですね!
ネコポスで送ってくる強者がいるんですね😮
レターパックやネコポスは保証がないてすからね(^_^;)。
綺麗になるな〜
腐ってもロレックスだから治したらまた高くなるんだろうな〜
Hi, just found your channel really nice work sir, I've liked and subbed, now I'm going to watch another one of your videos.
Andy.
thank you!
I hope you enjoy it.
やっぱり時計直せば愛着湧きますよね😊
オーナー様は、これが最後の時計として復活を望まれました。そうした時計に出会えると良いですね。
流石職人ですね!
ありがとうございます。
全く時計の知識も興味も無いんだけど、最後まで観ちゃいました!
漫画「ギャラリーフェイク」を思い出しました。素晴らしい!
う〜ん、一番嬉しいコメントです。
ど素人の編集でしたが楽しんで頂けて幸いです(^_^;)。
Really good job, but in my opinion spoilt by the fact it wasn’t restored to original with a fuschia bezel insert, and the luminous that was put in the hands doesn’t match the rest of the dial.
「天晴」の一言に尽きます。
「天晴」いい言葉ですね。
ありがとうございます。
素晴らしい技術ですね。感動しました。ケバラバ
ありがとうございます。
作業内容は、至って普通ですが汚さが半端なかったですからね(^_^;)。
enjoying your channel. subscribed
Thank you very much
私も見入ってしまいました。ロレックスの精密部品や組み立て、私には到底できません。
Great job working on the watch!
How did you obtain it?
Thank you for your comment.
According to the client, he was found walking around flea markets.
@@watchrestorationanytimewear Wow!
How much did you get it for? Looks great.
That watch was likely worn daily for decades until it stopped working 😮 1st time I see a Rolex in that condition.
If you got it for FREE you are very very lucky.
Thank you for your comment.
This Rolex is a client's watch.
I guess I was lucky because the repair cost was about 40,000 yen.
Pure Professional
Thank you very much
初めて拝見させていただきました。これだけ緻密で精巧なものをメンテナンスするわけですからオーバーホールの費用が高い理由がわかりました。ちなみにこの状態からだとほぼ新品を組むのと変わらない気がしますが、どれくらいの費用がかかるのでしょうか。
ご視聴ありがとうございます。
機械の部品交換がほぼなかったのでオーバーホール代を含めて4万円以下でした。
Need to match the color of the new Lume to the oxidized Lume on the dial hour markers. A very small spot of coffee added to the new Lume will help to match perfectly.
Just destroyed half of the value of that vintage rolex
well done
Thank you
This shows you why Rolexes and other high end watches are *so* expensive. The externals might be utterly destroyed by those internals are basically *bulletproof* Though I think it needs a smidge more adjustment to get it down to +/- 3 seconds a month to meet the Chronometer certification.
Thank you for your comment.
This time, I'm glad that there was almost no damage to the movement.
It is a national trait of the Japanese people, but they tend to dislike negative rates. So I'll keep it at about +10 seconds.
@@watchrestorationanytimewearHuh, well that explains the Grand Seiko's proclivity to running a bit faster. Thanks! Also excellent job repairing the watch. It's a beauty.
凄いですね😊💓✨
ありがとうございます。