Hi, I just installed my new Clubsport shifter onto the Playseat Challenge following your instructions. It is perfect, super solid and good position. Thank you so much for the idea and for the video! Ciao from Italy.
Thanks for uploading this video! This solution for the shifter mount really makes the PlaySeat worth it. I initially only used the GoPro mounts but I found that when I used the higher gears (particularly pushing down for 7th) the shifter would move. I ended up getting the RAM bolt too and now the shifter does not move anymore. I didn't use the 3D printed spacers and instead cut two small pieces of MDF with a thickness of 12mm to fill in the space between the shifter and GoPro mounts. Does not look nearly as clean as your solution but it does the job.
Thank you very much for this, I'm not much a DIY guy, but your instructions were so great that I got mine (exactly the same setup) installed pretty easily. I really appreciate you taking the time to do this video.
Thank you so Much! Very simple and super effective. I was surprised about how much support was from the cheap gopro mounts alone. Ended up going with the RAM-B-149ZU ram mount, but now I wonder if it was even needed. Either way I highly recommend this setup!
Thats a very good idea and with the weight of the driver it must work very weel. Nice music too 👌 Im going to buy the Handbrake and probably something similar will work. I have to think about that. Thanks for the video
Awesome video and documention!I ordered all Parts online easy and installed that my shifter and handbrake finaly. Works Perfect and the best Solution so far. Thank you very much!!!!! Hi from Vienna!!!
You say thanks for watching. I say thank you for taking the time to make such a thorough video. Every other thing I've seen online is a nightmare to understand, but you've nailed it. borderline genius I say. well, how else could you think this solution up, film it and play the piano at the same time? also, how does the fanetec shiter perform?
Hello. Great video and an impressive solution for a shifter. I found the mentioned ram mounts on AliExpress for just 14.68$ total including shipping + GoPro mounts for only 4,23$. Haven't bought them yet because I have a few questions for you please. 1. The "RAM Rail Base with B Size 1" Ball" seem to come with U shaped bolt only. Which size and length of the bolts have you used to mount them to T-nuts on CSL DD? I assume I have to buy them separately right? 2. The "RAM 1" Ball Medium Length Double Socket Arm with Diamond Base" I found on AliExpress are made of plastic and metal. Plastic ones are much cheaper but do you think they will hold everything well enough or should I go after significantly more expensive metallic ones? Also is the so called "Medium length" equals to 9,5cm? Really loved your video and thank you for sharing it with us. I've seen 2 other shifter mounts but yours looks just flawless. Amazing job!
I am glad the video helps. 1. I didn't remember what size of the bolt I used, but according to the drilling template which Fanatec provided, I't should be M6 bolt and about 10mm+ of length. 2. I suggest using metal socket arm, China replicated balls are less grip than the original RAM mount, you may need to apply more force on it. here is the drilling template of CSL DD: fanatec.com/media/pdf/ca/d7/fc/CSL-DD_Hard-Mount-Planner_01.pdf
Do you think it's possible to amount the fanatec handbrake on the outside of the shifter? would that still be stable enough? Thank you so much for this! so far the most efficient solution I have ever seen!
@@dabinn Hi Dabinn, just wanted to update you that I did mount the handbrake onto the shifter with your setup, and it works amazingly! Folding is perfect and overall very sturdy. Thanks again for your work! Cheers.
I am considering to prepare 10 sets of the kit, but it will take some time. If you are in a hurry, you may consider to download the STL file of the extension block for free (I posted a download link is in the video description.) and find a 3D print store to print it for you.
@@dabinn Regarding the Wheel Base: How do you find the stability with the PlaySeat Challenge? I am considering upgrading from a G29. I also added 8 tactile transducers to my PlaySeat Challenge. Each corner of my chair has 2 transducers working with Simhub software. For the back I mounted them to wood, and used some motor cycle mirror clamps to attach. For the pedals I mounted them under the pedals with wood and screws. TOTALLY worth doing.
@@rtimmins7212Is your rig still foldable after added tactile transducers? I feel the wheelbase arm of Playseat challenge is not steady enough. I am not sure if it was improved or not in later releases (I bought it very early). I have used it with weaker T300 and stronger CSL elite, both are fine, but not very good. So I consider not to upgrade my wheelbase again unless I have room to place a stronger rig. :D
@@dabinn yes I designed it so it is all still fordable. There is some movment with my wheel base platform. Seems to be at the joints, I may try to fix it
Hi, you need something to stop the pedals from sliding forward, please refer to the photos at #455 in this page: www.gtplanet.net/forum/threads/fanatec-csl-elite-racing-wheel-thread-officially-licensed-for-ps4.356268/page-16
Hi, I did not sell the parts, but if it was difficult to get some of the materials (that I listed in this video description) from your place, or you need my 3D printed extension block, Maybe we could think a way to deliver the materials to you.
It's less than 19$ for GoPro and RAM mounts on AliExpress. And there is not that much DIY to be done. You can even ask your friend or neighbor to help you out. I think it's well worth it for such a sturdy and well placed shifter mount. The official metallic plank is just worthless garbage in my opinion. And 3D printed brackets for 30$+ is a wobbly piece of ... plastic.
same gopro mount: www.protastic.co.uk/tube-mounts/251-handlebar-tube-mount-for-gopro-and-other-action-cameras-sjcam-xiaomi-etc-use-when-cycling-on-bike-7425606322326.html
Hi, I just installed my new Clubsport shifter onto the Playseat Challenge following your instructions. It is perfect, super solid and good position. Thank you so much for the idea and for the video! Ciao from Italy.
I am glad to know you like this design. :D
Amazing solution, you are a genius.
Thanks for uploading this video! This solution for the shifter mount really makes the PlaySeat worth it. I initially only used the GoPro mounts but I found that when I used the higher gears (particularly pushing down for 7th) the shifter would move. I ended up getting the RAM bolt too and now the shifter does not move anymore. I didn't use the 3D printed spacers and instead cut two small pieces of MDF with a thickness of 12mm to fill in the space between the shifter and GoPro mounts. Does not look nearly as clean as your solution but it does the job.
Thank you very much for this, I'm not much a DIY guy, but your instructions were so great that I got mine (exactly the same setup) installed pretty easily. I really appreciate you taking the time to do this video.
I am glad this helped 😃
Thank you so Much! Very simple and super effective. I was surprised about how much support was from the cheap gopro mounts alone. Ended up going with the RAM-B-149ZU ram mount, but now I wonder if it was even needed. Either way I highly recommend this setup!
Great video ! I was hesitating buying a Fanatec wheel because of the shifter mounting, but your solution is perfect !
Thats a very good idea and with the weight of the driver it must work very weel. Nice music too 👌
Im going to buy the Handbrake and probably something similar will work. I have to think about that.
Thanks for the video
Awesome video and documention!I ordered all Parts online easy and installed that my shifter and handbrake finaly. Works Perfect and the best Solution so far. Thank you very much!!!!! Hi from Vienna!!!
Thank you so much for the video and the STL files.
Ordered the GoPro mounts and RAM mounts. All I need now is the shifter, lol :D
Big thanks for this very good video
Great video, thanks for that!!
awesome. thanks for sharing.
You say thanks for watching. I say thank you for taking the time to make such a thorough video. Every other thing I've seen online is a nightmare to understand, but you've nailed it. borderline genius I say. well, how else could you think this solution up, film it and play the piano at the same time?
also, how does the fanetec shiter perform?
Thanks, I am very happy with my idea so take some time sharing to everybody. And the Fanatec shifter is the best one at an affordable price range.
That is clever, thanks
Hello. Great video and an impressive solution for a shifter. I found the mentioned ram mounts on AliExpress for just 14.68$ total including shipping + GoPro mounts for only 4,23$. Haven't bought them yet because I have a few questions for you please.
1. The "RAM Rail Base with B Size 1" Ball" seem to come with U shaped bolt only. Which size and length of the bolts have you used to mount them to T-nuts on CSL DD? I assume I have to buy them separately right?
2. The "RAM 1" Ball Medium Length Double Socket Arm with Diamond Base" I found on AliExpress are made of plastic and metal. Plastic ones are much cheaper but do you think they will hold everything well enough or should I go after significantly more expensive metallic ones? Also is the so called "Medium length" equals to 9,5cm?
Really loved your video and thank you for sharing it with us. I've seen 2 other shifter mounts but yours looks just flawless. Amazing job!
I am glad the video helps.
1. I didn't remember what size of the bolt I used, but according to the drilling template which Fanatec provided, I't should be M6 bolt and about 10mm+ of length.
2. I suggest using metal socket arm, China replicated balls are less grip than the original RAM mount, you may need to apply more force on it.
here is the drilling template of CSL DD:
fanatec.com/media/pdf/ca/d7/fc/CSL-DD_Hard-Mount-Planner_01.pdf
@@dabinn Thank you very much for your comments. Can't wait to try everything out.
Do you think it's possible to amount the fanatec handbrake on the outside of the shifter? would that still be stable enough? Thank you so much for this! so far the most efficient solution I have ever seen!
It should be very stable, but I am not sure if it still be compact in folding position due to it's large size. (I didn't use fanatec handbrake)
@@dabinn Hi Dabinn, just wanted to update you that I did mount the handbrake onto the shifter with your setup, and it works amazingly! Folding is perfect and overall very sturdy. Thanks again for your work! Cheers.
@@tim_yrt GOOOOOD! :D
Огромное спасибо!
Or even the whole set with the holes made in go pro handles ...I would buy
I am considering to prepare 10 sets of the kit, but it will take some time. If you are in a hurry, you may consider to download the STL file of the extension block for free (I posted a download link is in the video description.) and find a 3D print store to print it for you.
Great Video. I may do this one day. Right now I DIYed a Logitech Shifter, it worked great. I What wheel base are you running?
I am using Fanatec CSL elite. :D
@@dabinn Regarding the Wheel Base: How do you find the stability with the PlaySeat Challenge? I am considering upgrading from a G29.
I also added 8 tactile transducers to my PlaySeat Challenge. Each corner of my chair has 2 transducers working with Simhub software. For the back I mounted them to wood, and used some motor cycle mirror clamps to attach. For the pedals I mounted them under the pedals with wood and screws. TOTALLY worth doing.
@@rtimmins7212Is your rig still foldable after added tactile transducers?
I feel the wheelbase arm of Playseat challenge is not steady enough. I am not sure if it was improved or not in later releases (I bought it very early). I have used it with weaker T300 and stronger CSL elite, both are fine, but not very good. So I consider not to upgrade my wheelbase again unless I have room to place a stronger rig. :D
@@dabinn yes I designed it so it is all still fordable. There is some movment with my wheel base platform. Seems to be at the joints, I may try to fix it
Which kind of t nuts do you use? Thanks in advance, amazing job!
The T nuts are included in Fanatec shifter package. :)
Were can I get the extensions for the go pro mount? And which go pro mount did you use?
Hi, I used this one:
item.taobao.com/item.htm?spm=a1z09.2.0.0.340af9ctbtRJp&id=44265156284&_u=5hmtcp5e674
Hey did you make extra? Looking to buy a plug and play set up
Email me, let's discuss the detail.
dabinn at gmail.com
Why not use the metal shifter adapter that playseat sells for the challenge?
Is there such a product?
oh, I recall that there was a metal adpater come with the challenge, but the install position is too high so I just ignored the part.
Did the T nuts come with it? Cheers
Fanatec Shifter is shipped with several T nuts. :D
@@dabinn thanks for the advice 🙂 what length ram mount did you use?
@@chrisdurant19 All material needed and their spec. are listed in the video description. :D
@@dabinn thank you 🙂
How long is the Ram Mount? thanks :)
Accord to the RAM mount web site, the spec of the Medium Length Double Socket is:
Overall Length: 5.625"
Socket-To-Socket Length: 4.5"
Hello! How did you fix the pedals? I'm getting those but i don't know how to fix them properly...
Hi, you need something to stop the pedals from sliding forward, please refer to the photos at #455 in this page:
www.gtplanet.net/forum/threads/fanatec-csl-elite-racing-wheel-thread-officially-licensed-for-ps4.356268/page-16
Ram Mount有多长时间？
Do you sell this kit ? I am interested in buying it .
Hi, I did not sell the parts, but if it was difficult to get some of the materials (that I listed in this video description) from your place, or you need my 3D printed extension block, Maybe we could think a way to deliver the materials to you.
great job man, by selling it you could make a lot of money
Yea, I would definitely be interested in buying the extension blocks from you immediately
@@dabinn same here, can you make me a set
@@DROCTHEDJ I have some parts left, mail me: dabinn at gmail dot com
DH大大 能把这个mount 型号发出来吗 看能不能买到
我在影片描述裏面有貼淘寶的連結呀
没看到呢 麻烦能发给我吗谢谢你拉
item.taobao.com/item.htm?spm=a1z09.2.0.0.340af9ctbtRJp&id=44265156284&_u=5hmtcp5e674
您是在国内的吗
然後RAM mount也可以買'五匹'的手機架代替，比較便宜
Good Solution but: 1) too expansive; 2) not practical for those who are not expert in DIY
The RAM mount is $38 that's not expensive, and you don't have to be a DIY expert to cut 12mm of a broomstick and drill a 5mm hole through it.
It's less than 19$ for GoPro and RAM mounts on AliExpress. And there is not that much DIY to be done. You can even ask your friend or neighbor to help you out. I think it's well worth it for such a sturdy and well placed shifter mount. The official metallic plank is just worthless garbage in my opinion. And 3D printed brackets for 30$+ is a wobbly piece of ... plastic.
same gopro mount: www.protastic.co.uk/tube-mounts/251-handlebar-tube-mount-for-gopro-and-other-action-cameras-sjcam-xiaomi-etc-use-when-cycling-on-bike-7425606322326.html