VIP LEXUS LS400 BUILD! Part 2: Raising the Engine, Differential and Notching the Subframe!
Vložit
- čas přidán 10. 09. 2024
- Check out Octane and Zipties! / @octaneandzipties
Excited for whats to come with this car! We got a HUGE amount of work done in this video! From raising the engine, to dropping the subframe to notch it, as well as raise the diff, this thing's almost ready to get low!
----------------------------------------------------------------------
CAMERA GEAR I USE!
Camera: goo.gl/FW1ez1
Lens: goo.gl/k8kXJC
Camera Stabilizer: goo.gl/NQUxxt
Stabilizer Case: goo.gl/tVKZVp
Monitor: goo.gl/DcuzaF
Microphone: goo.gl/QFo8uQ
Camera Cage: goo.gl/PfmXyS
Camera Backpack: goo.gl/a1EmX8
YESSSIR! Glad I could help, all love when it comes to sharing this kind of tedious custom work🤝
You and Mike are making me want an LS so bad
I love lexus ls I want one but for now I got an 04 Camry and i wana make look like a vip car havent seen one yet.. I just want to do it right
ayyyyy logan made it yessir
Shoutout to Mike for using the metric system to explain measurements
It is so nice to see you more often in Adam's channel but keep up with the content and make videos more often mike, loving the ls content btw!
From lz channel to Mike... awesome day 😎
I need your Spotify playlist, I always hear lil peep in your videos now I’m hearing either brennen Savage or convolk & some $uicideboys. You have great taste in music, what’s the link? 👀
Bunch of edgy junk, get on some kirb la goop boy
SucculentChinese Meal bruh lmao 😂
SucculentChinese Meal ong
Here I am a year later and can’t get enough of this series! Could watch it over and over! So satisfying watching the transformation!
Damn we both pulled our subframes at the same time haha!
15:35 I see you slapping that Oliver Francis boiiiiiii 🔥
Aye didn’t even notice that lmao boy bumping olly
I been subscribed for 2 years or so, glad to see people coming to your channel. Hope you get 1 mill one day!!
legit I have made 6 sets of the same style motormount spacers for mine and my friends Audis and Passats
Thats funny when I was looking into modding a Ls400 I watched all of Logans videos
Even though your not in CT you should powder coat you subframe. Slammed 90 VIP style LS 400 is one of my favorite cars. Your Videos and LZs are getting even better than before, keep it up !
Thank you for going the static route and not bagging it!!!!!🙌🏼
Marco is cool! Seems super chill and knows his stuff
For anyone in the future Static Club also sells the engine and transmission spacers and will continue to sell em on their website
look at mike with his red komodo
big jealous
Im calling it 100k subs by the end of the month! Your welcome and love your builds and how you do but glad your at a place and in a environment and surrounded by guys that love doin the same things and all have years of experience and experience new things.
Well its Sept 1st and your at 100k hats off that's over 60k subs since I found this channel
Straight pipe 1uz is the way to go 👌
Such great content bro. Never a boring video. I hope my channel grows like this one day. 🙏🏻🙏🏻🙏🏻
Looks like your due for a new transmission mount. Reminded me of mine when I replaced it about a month ago!
Supporter before you finished the del soul and sold it 🤘🏽
Mike rock'in that LZ Haircut...BFF's!!
It’s pretty crazy you and LEP Automotive just released a video of you both pulling your subframes on your LS 😂
Been here since the very first vlog. More than stoked that you've almost reached 100k subs!
love the build not enough people document building VIP cars
13:53 is probably the best part of the whole video
Lol that dam cap got me too on my 99 ls400 when I was installing the coilovers
Content on point as usual every vid got me excited for my first car😁. Keep it up Mike👍
Congratulations on reaching 100K SUBS!
Congratulations on 100k ❤️❤️❤️
.
Ya boi, Jimmy send me btw.
i thought there was be a burnouts
Oooh I'm looking forward to seeing this when its done
Thanks for the membership man! First one!
@@diiviinemedia ❤❤
For the front subframe you should buy a second one to fabricate on and get that out of the way
You should put a ducktail on the soarer
Yo mike plz don’t let the rubber on the flex joints just wear out. I did the exact same thing and I ended up needing a new diff because my mounts in the diff were shot from the flex joint being messed up.
Congrats on the 100k subscribers and when you put those coils on also tuck your driver side chassis harness and also check passenger side engine harness aswell since this car will slammed on its nuts which is bad ass
A buddy put me on to your channel, finna do this with my 93 cause I’m danger scraping
I love it one day my would be lowered great video bro👍
So, I guess raising the engine is a better move than a skid plate? Just thinking about that oil pan.
Keep it up bro
Great vid
Almost at 100k my dude
They sound the best without cats,an x pipe,and magnaflows,there are vids sounds sweet.
Hollow cats
Really enjoyed the song on this one...Know what track it is?
Loving the progress on the build btw!
I hope to move to Florida is helping
Divine and lep both doing rear subframe drop
Ufff almost 100k 🔥🔥
Looking forward to the burnout with half an exhaust
Why not raise the entire subframe with riser solid aluminum bushings?
Yo! Shout out to Dayton One! those are some old good friends of mine.
Ppl think VIP builds are just slamming the car on coilovers but they don’t see all this type of work
👏
A lot of work involved with a VIP build 🤯 yet I still want to take my 7th Gen Accord down this route.
Dont have to drag your car down the road for a vip look
@@xavierriestra9200 of course ! Not going this low
Oooooh I see a Massachusetts plate .. :) what part ?
Sounds sick, straight pipe it
Please do PPE headers down the road! Please!
100k subs is there!!!😁
Sniper gang🎯
I am planning on getting one of these, this seems like the first thing I will need to get done in order to drop the car low. Looks like a lot of work for someone with a one car garage and not power tools. If anyone knows a shop in florida that can help me do this lmk!!!!
My day.... Alberto Bigboost to Adam LZ to DIVINE.
#SliverOfSunshineIn2020
so close to 100k 👀
this man is going to drag on the ground lmao
Any issues with the new angle of the driveshaft?
For real
Just subscribed thought I was already oops 😂
2:59 I heard that $b
mayten 👌
Nice welds from harbor freight welder
It ain’t about the machine it’s about the operator
Always wanted to buy a slammed ls off of Facebook, now I never will cuz I know for a fact that all the Facebook mechanics definitely did not take all these precautions.
I wanna get a 93 ls400 soo bad
Toyota over engineered the ls400 in so many places and did such stupid things in others but they are awesome mine is manual swapped. If you want it to sound amazing take out half the cats half the mufflers and a turn down under the rear seats
Do you have 2 or 3 cars. The toyota and lexus. I know you had a VR6 Audi A3? I was just watching the video again of the muffler delete.
Still have the Audi but it’s up north for now
@@diiviinemedia well that's good so if you visited back home you still have a ride and not need a rental. Thanks for the reply, now in know. 🤟
What happend to the audi?
what year
You don’t like this more then living at the shop with mr Fyeah and Rudnik
Wym ?
how u ganna tell him what he likes
When did anyone ask?
How many miles are on the ls400 bro? I keep meaning to ask and finally caught a video early hoping you’d reply. This is a dream build of mine and I can’t seem to find one I want.
I think he made a video when he got it and said the mileage not too sure tho
You from Massachusetts
Yo what's up dude
What is the song at 15:51. That shit is fire
Why not bags like the barge
I miss having a car I can drag around
Weld the diff since it’s out already
You can weld the diff still attached to the car just as easily once it's on a lift
why bother welding the diff on a vip build
mike doesn't seem to like the seat belt either here or on adams channel
So we’re just not gonna comment on the fact that there’s at least 3 people working on this car and no one thought it would be a good idea to hang up the brake calipers? Y’all just let them hang by the brake lines for 3 days? What a clusterfuck
Suspension harbor freight welder lz shop
Hey mike the audio is shit 😉😂😂😂
hey youuuuuuuu stop that lmao
Harbor freight welder wtf
Lol
Yo! Turn the fricken intro audio down!!!
No offense but your thumb makes me uncomfortable 👀
No offense but your thumb makes me uncomfortable 😣