Installing Cable on Worm Gear Winches - Step-By-Step
Vložit
- čas přidán 5. 07. 2024
- This video covers how to install cable on your Dutton-Lainson® worm gear winch, whether you have a standard or split reel.
0:00 Intro
0:39 Removing the winch reel
1:16 Cable diameter info
1:37 Installing cable- standard reel WG2000s
2:37 Installing cable- standard reel WG1500s
3:13 Winding on the new cable
3:51 Installing cable- split reel WG winches
4:21 Outro
Enable captions to see this video's full script.
WG1500 and WG2000 winches can be purchased here:
www.dutton-lainson.com/product...
Worm gear winch cable can be purchased here:
www.dutton-lainson.com/product...
Check out our channel to watch additional videos about DL and our products: / duttonlainson
Subscribe to our channel to get all of our videos in your feed: czcams.com/users/subscription_c...
Watch more instructional videos like this one in our Step-By-Step Playlist: • Step-By-Step
Thanks for watching!
*Music by Dan-O at DanoSongs.com. - Auta a dopravní prostředky
These videos are very interesting and helpful.
+Kevin Hornbuckle We're glad to hear it! Are there any specific products or topics you'd like to see us cover in a future video?
Kevin Hornbuckle
super like .. thanks very much coz u helping others
Can
Hello, Does the orientation of the cable matter? As in, if I am running the cable up to my ceiling and over a pulley, should the cable run 'under' (so it's closer to the wall) or 'over' so it's further out? Also, is the cable supposed to run in front of or behind the spacer bar, or does that go on the opposite side? Having trouble determining the correct orientation to use. Thanks!
Mike- thanks for your question! Yes, the orientation of the cable definitely matters! When installing cable onto any Dutton-Lainson worm gear winch, the cable should always be installed so it comes over the top of the reel, never under the bottom of it. Also, the cable should always be going off the reel straight towards your load, not back in the direction of the spacer bar and the rest of the winch. Incorrectly installing cable in either one of these ways could damage the winch or cause it to not function properly.
Good morning, I live in Brazil, I found your product great, and it works amazingly, I would love to have one
Thanks for the kind words! If you'd like to use one of our products in Brazil, feel free to place an order on our website- www.dutton-lainson.com
WG2000 is top quality. I installed it easily on a wooden beam in my garage. I use 3/8 aircraft cable to lift antenna mast. The winch is very precise and the movement is slow and controlled. I do not trust winches with brakes. This model brakes on its own by design.
Thanks for the kind words, Sinisa! We're glad to hear your WG2000 is working well for you!
My company ordered the split reel part no. 10952 and cable part no. 24069. There is only a hook on one end of the cable so do I need to use a splicing sleeve on the other end of the wire to make a loop for a separate hook?
Thanks for your question! You are correct- none of the cables we sell have a hook on both ends, so if you want to use one on a worm gear winch with a split reel (such as part #10952), you'll have to attach a hook to one end of the hook yourself.
I have a DLB35A Series winch...Would you please share how to install the cable on this modelThanks
Mike- Thanks for your question, but did you mean that you have a DLB350A? If so, you can see how to install cable onto a DLB350A here- czcams.com/video/czzSN1c17FI/video.htmlm2s
Thanks for amazing product. It should have a lever to lock from freely rotation.
Good video
Very good
Hi, just wondering if the Dutton-Lainson worm gear winch is easy to use for pulling 300 lbs of dead weight on a wheeled cart from 85 yards away down a steep trail with small obstacles on the way? Thanks
Abba (This reply is being re-posted as our original response from six months ago was deleted from CZcams)
Thanks for your question!
The short answer is yes- you could use one of our worm gear winches in this application. However, there are a few things to consider:
1. Because you'd need 255 ft (85 yd) of cable to cover the distance you described, it would have to be extremely small (3/32" in diameter) in order for it to fit on the winch's reel.
2. Because our worm gear winches have a very high gear ratio (meaning you have to completely turn the handle a minimum of 30 times to complete a single revolution of the winch's reel), pulling a load 85 yards would take a huge amount of effort and time on your part, so one of our worm gear winches with a HEX drive shaft (allowing you to power the winch with an electric drill) might be a better fit. However, operating the winch with an electric drill for the amount of time it would take to pull the cart 85 yards will generate a lot of heat in the winch bearings.
If you only need to bring the cart up the hill with the winch and do not need to let it back down, you might be happy with a ratchet type pulling winch. The model DL1602ADD has a direct drive capability so you can pull in line very quickly and then change to a 5.4 to one gear ration if cranking gets more difficult. The drawback is that if the winch has to let the cart back down the hill, the winch ratchet has to be released and it is totally up to the operator to maintain control of the winch handle which will want to spin freely. This, of course, creates a risk of injury if the operator loses control of the handle during this cart lowering process. www.dutton-lainson.com/proddetail.php?prod=14520
Another alternative, if the winch needs to let the cart back down the hill would be one of our self-locking brake winches. This might actually be the best choice for you because the handle cannot get out of control. However, these winches do have a minimum load requirement during the lowering process in order for them to operate smoothly. Our DLB800A (dutton-lainson.com/proddetail.php?prod=14912) might work for this application, as long as the cart creates at least on the winch 50 lbs during the lowering process. This winch could also be fitted for operation with an electric drill if you wish. www.dutton-lainson.com/proddetail.php?prod=14467
www.dutton-lainson.com/proddetail.php?prod=14466
Let us know if you have any other questions!
9uh
I love it beautiful hand winch!.Where can I buy it.Thanks a lot.
Ces vidéos sont très intéressantes aux hommes des métiers, c'est magnifique. Du courage pour ceux ont l'inspiration de trouver toutes les données qui ressemblent ces inventions. Une fois de plus, du courage..
Ilove it beautiful hand winch where can I buy it thanks a lot
Super like very good idea
very good
Just bought a 1500 worm drive. Can it be rigged with high strength synthetic rope such as kevlar , dyneema, or spectra ?
Jim,
Thanks for your question, but unfortunately, no- we do not recommend that you use these types of high strength synthetic ropes on Dutton-Lainson winches. Because these ropes are extremely slippery, they pose a high risk of severely damaging the winch's reel and ultimately the winch as a whole.
Hi
In your second reply you stated that nylon rope is all right. Is nylon and synthetic different ?
Thanks
Marcell- thanks for your follow-up question! We looked into this further and have determined that we also do not recommend using nylon rope on any Dutton-Lainson winch, for the same reasons stated above for high strength synthetic ropes.
Would it be possible to use nylon rope onthe 1500 for other applications?
Dutton-Lainson Company
Thanks for your question, but we do not recommend using nylon rope on any Dutton-Lainson winch, as it can cause damage to the winch's reel and/or the entire winch.
What is the lightest load we could use? Want to lift a large laundry basket of clothes, and occasional other things. About up to 50 pounds. Thanks.
Thanks for your question! Our worm gear winches do not have minimum load requirements, so you can use any of our WG models for the application you described.
وين احصل مثل هذي العجله بالرياض
Where I can buy it in Dubai UAE
كيف استطيع الحصول على المنتج وكام طن وبلد المنشأ
O vn minh co ban loai nay ko mn gia toi nay tai 500kg bnh tien
Is there a standard drive to hex drive conversion adapter? Bought the WG2000 recently, assuming they all came with the hex drive, but mine only has the standard drive. I can probably rig something up myself, but I question if the standard drive can handle hire speeds noted for the hex drive. Thanks.
Thanks for your question, Kristin! We don't offer any kind of adapter or kit to convert a WG2000 with a standard drive shaft to a WG2000 with a hex drive. However, it is a very simple process to change drive shafts on our worm gear winches. All you have to do is pound out the pin holding your winch's standard drive shaft in place, pull out the standard drive shaft, slip in the hex drive shaft, and then pound a new pin in the hole to hold it in place. Both the hex drive shaft (part #406102) and pin (part #205246) can be purchased from this repair parts page on our website: www.dutton-lainson.com/proddetail.php?prod=WG2000
Thank u ขอรับ
I want to buy ur winch but it's too costly.
interesting....
Tell me price this tool
Cuanto dinero??
I want AC outdoor lifting prprz
consegue puxa de dentra agua carreta e lancha pega subida
cuanto cuesta
Is this the same with rope?
Thanks for your question! Yes, the cable installation process outlined in this video would also apply to installing rope on one of our worm gear winches. However, synthetic rope cannot be used on any D-L winch, and you would first have to be sure that the rope you have in mind would be strong enough to handle the loads you plan to lift or pull with the winch.
Dutton-Lainson Company ok thanks
Thank you it really helped now I can start to pull
Thanks for the feedback. I accessed your website, I would like to purchase the product WG1500 Helical gear winch
Part number 10950, however, due to the dollar price, when converting to my currency, R $ 5.68 will be unfeasible.
hello, we are professional manufacturer of worm and worm gear sets, feel free to contact us if you are in need, whatsapp & wechat:+8618667181821, email: wisuc@hotmail.com
How much?
Thanks for your question, but the prices of our worm gear winches and cables vary depending on model. You can shop for our line of worm gear winches (www.dutton-lainson.com/products.php?cat=20) and cable (www.dutton-lainson.com/products.php?cat=18&pg=4) on our website, or you can purchase them from one of our vendors, such as Amazon.com, Northern Tool, Grainger, etc.
Cómo lo veo en español
Cuanto cuesta un winche como este.
Puede comprar nuestros winches de engranaje helicoidal en nuestro sitio web: www.dutton-lainson.com.
Hay
I want to buy our winch but it's to costly
Does this model has a brake?
A__ Aldrees tu bb
...
Thanks for your question! All Dutton-Lainson worm gear winches have a built-in automatic brake with no minimum load requirements!
Price 20,5 $
www.vseinstrumenti.ru/silovaya-tehnika/gruzopodemnoe-oborudovanie/lebedki/ruchnie/barabannye/kalibr/ruchnaya-barabannaya-lebedka-kalibr-lb-540/?gclid=CjwKCAjwmq3kBRB_EiwAJkNDp7I-T1T3CPU1pFgFlNyxsjcFssRbIA45gNVYVLffI8e1AA26xe31KBoChBoQAvD_BwE&.google.com%2f&fa821dba_ipp_key=v1552700535528%2Fv3394bd35200f89c3e55354163aeca6afa04ab3%2FNFmNx2l7VvMvGCyx8lUAdQ%3d%3d&fa821dba_ipp_uid=1552700535527%2fA5TZAvZkaYAiPgUl%2fft3FXRrN9AQ1ppHyN5raFQ%3d%3d&fa821dba_ipp_uid2=A5TZAvZkaYAiPgUl%2fft3FXRrN9AQ1ppHyN5raFQ%3d%3d&fa821dba_ipp_uid1=1552700535527
Sir like this I want this one
Hi
Matap mas ok
👍
ثصميم حامل ذراع الونش.
Ranadeer
Hindi me
I think process is costly
हमे ये मसीन लेनी है आपके नबर भेजना
You failed to state the somewhat obvious, yet missed by some, fact that you should turn the handle clockwise to initially spool the wire rope.
ComoagounwinchconunmotordearranKe.
شش
Hi