Making Simple + Strong RUG TUFTING FRAMES out of 2x4s
Vložit
- čas přidán 11. 12. 2021
- Building a MASSIVE, floor standing 6' x 6' rug tufting frame for Dan Rodo @TheDanocracy , as well as a tabletop 2.5' x 2.5' version!
These rug tufting frames are made entirely from 2x4s and are easy to build with a circular saw, drill, pocket hole jig and speed square!
Check out Dan's videos:
/ danocracy
/ danocracy
/ thedanocracy
Check out the links below for all of the tools and materials I used in this project!
You can directly support my videos and access exclusive behind-the-scenes content (including a BTS podcast for each video!), physical rewards and more on Patreon: / morleykert
TOOLS / MATERIALS I USED IN THIS VIDEO:
Carpet tack strip: amzn.to/3seL8CT
Ryobi Cordless Brushless Circular Saw: amzn.to/3mWYJu6
Ryobi Drill/Driver + Impact Driver Kit: amzn.to/3pqtrPl
Countersink drill bit: amzn.to/3yshPxG
Kreg Pocket Hole Jig 320: amzn.to/31WIXs9
Japanese pull saw: amzn.to/3aJHarB
OTHER TOOLS I LIKE TO USE:
www.amazon.com/shop/morleykert
Note: The above Amazon links are affiliate links, meaning that, at no additional cost to you, I may earn a commission if you click through and make a purchase.
You can see more of my work and behind-the-scenes content on:
INSTAGRAM: / morleykert
TWITTER: / morleykert
TIKTOK: vm.tiktok.com/xSfbdj/
I'm also on these podcasts!
Into the Spotlight: anchor.fm/into-the-spotlight
CLAMP: www.clampcast.com/
morleykert.com/
#DIY #rugtufting #danocracy - Jak na to + styl
I’ve been trying to figure out how to make a bigger frame. This was awesome Thank you!!
Great job
Thanks for sharing this video
Thanks bro totally bout to build this 🫡
That is awesome, simple and fully functional.
Thank you!
This is perfect!
Do you have all the sizing of wood for the 2 1/2 frame ?
That's the coolest gun I've ever seen (frames not bad either) 😁
Nice work, simple sturdy design. Tack strips is a good solution for securing the cloth.
Thanks, Dave!
Pocket holes were a good choice!
They’re pretty perfect for something like this!
Judging from the size of those screw eyes, Dan's next rug will be made with stainless steel bridge suspension cable.
Saludos desde México 🇲🇽🤙🏼
¡Saludos desde Canadá! Nunca he estado en México, ¡pero espero visitarlo algún día pronto!
you've got it guys, but can you also build a size-adjustable frame?
Hello from Scarborough!
Hello from Toronto! Thanks for watching 😊
What kind of drill are you using ? Is it a type of driver?
How long is the 2x4 on the sides
Im looking to do a large frame. Do you have a cut list?
How do you get the frame to not warp
How long should the feet be to be stable? Simple and beautiful design!
Thank you! For the small frame, I think they were 30 inches long, and for the large one, 48 inches long
I saw he claps the smaller frame to the table to tuft. Does the larger one need to clamp down also or the long legs allow it to be sturdy and not need a wall brace?
I think the bigger one is sturdy enough on its own
Do you have a list of all tools and wood?
All of the tools are listed in the description! Are there specific dimensions you’re interested in?
@@MorleyKert Hi from Puerto Rico! Could you please specify the dimensions of the complete legs assembly? I read in one of the comments that the base is 30” for the small frame and 48” for the big frame. What about the horizontal part, the one that goes attached to the frame side? Thanks!
@@oscarfigueroa3462 Hello from Canada! Yes those are the correct dimensions for the feet.
For the large frame, I think the vertical legs (which attach the feet to the frame) were 60" tall.
For the small frame, the vertical legs were about 24" tall.
@@MorleyKert Great, thanks for replying!
No problem! Let me know if you would like other details 😊
What are sizing on larger feet
Plus sizing for braces on feet back side
U should hide ur license plate man, ppl be weird on the internet. Awesome video tho.
Bush baked beans don’t give out their ingredients just for likes!!!🤔
I feel like there’s a joke here that I’m missing 😂
It is a joke!!!🤣🤣🤣🫠🫠
That’s amazing