Video není dostupné.
Omlouváme se.
HOW TO GET A PERFECT EDGE PROFILE WHEN USING A GUIDED SHARPENING SYSTEM
Vložit
- čas přidán 20. 09. 2023
- Thank you for watching! If you like what I’m doing please hit the thumbs up and subscribe to see all future videos! I’m working hard to put out quality content consistently and I’m doing all of it for free. All reviews and items featured on this channel were purchased out of my pocket and I have absolutely zero incentive to tell you anything but my absolute honest thoughts and opinions. I do this because it’s my passion and I want to help people who share the same interests! I’d love to hear your feedback and what you would like to see next as well as any constructive criticism that may help me to make the best content possible!
Sincerely,
Sean
📥Email:
asapboost92@gmail.com
📸INSTAGRAM:
@bladesandfades_
🔥TOOLS I USE & RESOURCES
💢COLD STEEL CODE 4 TANTO
www.amazon.com...
💢COLD STEEL CODE 4 CLIP POINT
www.amazon.com...
💢ZT0562ti
amzn.to/3PcG517
💢ZT308 STONEWASHED BLADE
amzn.to/3p0WfQF
💢ZT308 TIGER STRIPE BLADE
amzn.to/3Nbfz5t
💢SPYDERCO NATIVE 5 LW MAXAMET amzn.to/3q0hAcW
💢PLASTIDIP
amzn.to/44CEvuM
💢TSPROF CENTER CLAMP ADAPTER
www.etsy.com/l...
💢KLEIN ANGLE CUBE
amzn.to/3B8aRQC
💢BAILOUT / BUGOUT GREEN TI SCREWS
amzn.to/3LKCLbK
💢KAPTON TAPE
amzn.to/3lFRs5q
💢TSPROF KADET PRO
amzn.to/3kJt2r0
💢BENCHMADE BAILOUT M4 PLAIN
amzn.to/3KRmAZS
💢BENCHMADE BAILOUT M4 SERATED
amzn.to/3ENb2CY
💢FLATTENING PLATE
amzn.to/3YCvnSU
💢SILICONE CARBIDE
amzn.to/3I8QIOl
💢SPYDERCO ENDELA K390
amzn.to/3ij6Wuf
💢EDC ORGANIZER POUCH
amzn.to/3hZ9kFV
💢MANIX 2 LIGHT WEIGHT MAXAMET
amzn.to/3PZLMgs
💢SPYDERCO KAPARA
amzn.to/39pLfDW
💢SPYDERCO SHAMAN
amzn.to/3NjeR4Q
💢SPYDERCO SPYDIECHEF
amzn.to/3FyPhWy
💢KME SHARPENING SYSTEM
amzn.to/35cT6mj
⭐️WIHA TORX DRIVERS
amzn.to/34SYNWW
💢KME KANGAROO STROP
amzn.to/3s7IZs5
💢BEAVER CRAFT PADDLE STROP
amzn.to/3s9LKcw
📍SPYDERCO MILLIE PM2 P3 CLUB
m.facebook.com...
❤️WAYS TO SUPPORT
💢Comment, Like, Share, Subscribe
💢Prayers
💢Join Paetreon!
www.patreon.co...
💢Sharpening Service: $30-$50 per knife
💢Other Modifications: Washer polishing, Detent strengthening, Ceramic detent upgrade, Spa cleaning service, Lock bar access & more!
💢Die-cut stickers available $3
💢Use my Amazon links below!
💢Donation via PayPal:
asapboost92@yahoo.com
Thank you so much for any and all support!
🙏🏻❤️🙏🏻❤️🙏🏻❤️🙏🏻❤️🙏🏻❤️🙏🏻❤️🙏🏻
Some good information on how to sharpen knives in this video thank you for posting
@@ADAMGILBRT82 thank you and you’re welcome!
Really nice watching a man that takes pride in his work giving out his own points that he uses, even if they’re points that have been made before by others, it’s really beautiful too see how and wot ones you actually use. As you get some of the finest edges that make scalpels look blunt! Have a beautiful day and stay safe and healthy brother 👍😘🫵
Thank you brother!! That really means alot! Hope your day and health is great also! 👊🏼😁
Great tips as always. I think I did my shaman at 17 too. Be blessed bro
Thanks brother, you as well! 🙏🏻
Awesome video Sean!!! I’ve heard all these things before in the KME group, but reinforcing them with your videos is so helpful!
Have you ever considered doing a Q&A video for viewers to ask you questions?
A follow up: I didn’t mean to belittle your tips or points you made in your video by saying I’ve heard them before. I’ve heard the idea before, but you word them very eloquently and share your own experiences!
@dannycsaszar5011 all good man no offense taken! I do my best to try and help people understand not only “what to do” but the reasoning behind it because there’s many different ways to achieve the same end result. All you really need to know is how to progress in the right direction towards the desired result.
Thanks brother, always happy to help! And I actually have thought about that a few times, I might have to do one soon.
That’s an awesome idea, putting your finger on the tip of the blade. I have a wicked edge, and struggle sometimes with not rounding the tip of the knife , thanks for the vid, gonna try that next time!
Thanks man, it’s definitely helpful to me. It’s one of those things that you do to prevent making problems for yourself. You could do just fine without doing it but you’ll roll off that tip when you least expect it so it’s better safe than sorry!
Thanks
@@ADAMGILBRT82 thanks for the support! 👊🏼🙂
Thanks Sean your comments and tips on technique gave me the confidence to reprofle my Gaurdian 3. With my TSPRof Kadet and Venev stones have sharpened it more than its ever been. But the most important peice of advice that kept coimg back was mark the bevel mark the bevel
That’s awesome brother! Happy to hear it! There’s definitely a reason I emphasize certain things constantly because they really are essential! My only desire is to help people improve their sharpening so its great to hear when I was successful in my efforts!
You have an excellent CZcams channel. Love your tutorial videos, I've learned a lot, thank you!...
Thank you for those kind compliments! You’re very welcome! 👊🏼☺️
Thanks for the detailing how to work the tip. That’s where I have the most difficulty.
Excellent work as always!!!!!!!
Thanks brother 🙏🏻☺️
Awesome video! Thank you so much for sharing your knowledge and expertise! You are the best of the best!!❤️⭐️👍🔪💯🥰
Thanks mom 🙏🏻🥰
It'd be nice ff an attachment provided a LOCK that to restrict lateral travel past the heel or tip.
I place my finger under the tip or heal when necessary to prevent exactly that!
I go over it in detail in several of my sharpening tips videos!
@@BLADESANDFADESOFFICIAL I should've mentioned that (as I did catch that remark) ... I just meant that it would be a cool if an add-on attachment offered such a feature of limits. Thx for the reply.
Good work brother
Thanks man 🙏🏻☺️
Hey man noticed the Baltimore tattoos, right in my area haha how do I go about possibly having you sharpen my Spiderco's? Would love to have you do my Manix 2 s110v & PM2.
Hey brother, small world! Message me on instagram and we can get everything set up!
Great content man. Also dont sleep on that bladeops Elmax pm2 emerson opener preorder sept 26 👊
Thanks man I appreciate that! And we will see, I’d love to grab one but the budget is tight right now. If you get one you can always send it to me for sharpening 🤷🏻♂️👊🏼😁
How do you align the blade to the clamp? Do you draw a line from the heel of the blade to the tip?
🙌🔥🔥🔥
👊🏼☺️
im have a hard time to tell when to flip the blade, under lights, i see the burr, so i flip it, then i keep grinding until i see burr again, then i flip again, but in the end, after deburr with ceramic rod, its still dull as hell, no idea what to do :/
It takes practice brother, don’t get discouraged! Back when I first started I decided that I was going to keep trying until I figured it out and after a couple days I was making progress. Over the past thousand knives I’ve sharpened Ive continued to make progress and learn and that process is still ongoing. Its not a overnight process bro, there’s no shortcut around putting in the time and work however if you follow the tips from my videos it will make that process much smoother and help avoid making as many mistakes! For me alot of it has just become instinctive but im always assessing the edge visually and by feel the entire time and that feedback helps me determine what to do next. Take your time and just don’t give up! If you keep at it, you’ll continue to make progress!
So I'm having an issue with a fixed angle k03 pro giving a uniform bevel on both sides of the blade. I have the axicube 2 which is built into the stone holder and I'm within .5 of a degree at the tip on both sides but one side looks like I ground it 3 or 4 degrees more shallow it's confusing me what do you think the issue is?
Not sure if this is a primary bevel issue from the factory where one side is significantly thicker from the centerline of the spine or not but I'd like to resolve this as I'm starting a sharpening service up
which stones & grits did u use..?
Which clamp is that?
Respect. Recently, I came across an interesting review of a knife manufacturer (on the manufacturer's unfair practices, i.e. on the problem of tempering the metal. The magnacut scandal posted by. SURVIVE! The topic is interesting because there is a chance that it is due to an aesthetic error, which is probably not compromised by God knows how many products This also raises the question of what happened or what will happen to these blades, will they be resharpened into new models or will they be re-released for sale after some time as they are only repainted or disguised in some other way. Is this a problem only with Magnacut? I don't think so.
It’s hard to say unless people are testing it. I don’t expect great performance from alot of companies out there. I kinda know what I can expect from different manufacturers and Spyderco is always on point, thats why they are my favorite.
So u are working more on the thinker bevel side since they sharpened it to higher angle right?. U did even out both sides bo on the orginaly smaller side the tip id still not sharpie free. What u do? Just keep switching sides since they both same width + a bit more passes on the tip side when the sharpie is still there? Sorry for my english :)
Yep exactly, you got the idea of it!
@@BLADESANDFADESOFFICIAL thanks!
@@greypant7204 you’re welcome!