Again! Another great review! Like you, the baby hawk 2 HD has been my go to in most favorite quad to fly for all of the reasons you've mentioned. When the 03 system came out I jumped on board pretty quick . I installed the 03 system on my baby hawk 2. It was a little tricky and I had issues at first getting rid of the vibrations going into the camera. I did some minor modifications to separate the front standoffs a little bit and also using some rubber grommets on the camera screws. If something happens to this quad, I will definitely be ordering the baby hawk 03. Happy flying everyone! This is such a cool hobby!
Great video, Kelly!! I guess this is the replacement for the TinyHawk Freestyle! I kept waiting to pull the trigger on the freestyle 2 hoping they would come out with the TH FS 3 for Christmas. Taa Daa! enter the Baby Hawk!!
It's a great looking FPV drone, seems to have all the features that you need in this type of drone. The footage looked good also. Nice review Kelly, thanks for sharing.
Hello Kelly. Thanks for your excellent review on the new Babyhawk 03. Except for the couple of items you brought to our attention, with quick fixes, this new drone look awesome. Wow, it's looks like someone is getting some new rooftop A/C Units. Thank you for another excellent review.
Looks like a great little quad, Might be a good option for me to get back into fpv. I still have the fatsharks but would like an affordable digital option. Mindfiled is two days away and I'm not sure I can make this year.
You need to get the UV filter or ND filters to protect the camera, filters are way cheaper and easier to replace then the camera. Looks like a great quad though. I'll have to try it sometime
😅 I just noticed those and went in and trimmed the video. CZcams will take a few hours to update it. Thanks for watching and noticing my editing mistakes. 😜👊
You can record on either one or on both. The quad has a micro SD Card slot. The biggest difference is that the recording in the goggles is not stabilized by "Rock Steady" EIS.@@dortmunder27xxx
When the Crocodile baby comes out with a 03 version, which do you think you will like better? Will be interesting to see a side-by-side comparison. #dontsmashintosomething
Can you believe I am still flying analog? 🤦🏻😂 it’s only because I have FPV on quads, airplanes, trucks, etc. my wallet can’t handle the switch and I can’t narrow down the toys. 😫 But I digress, sorry for the rant 🤪 great video and it looks like a great little bird 🦅 😉👍👍
I’m thinking about getting it, would it bind to my DJI Controller 2 and the V2 goggles without ELRS? Maybe if I get it hopefully I #DontSmashIntoSomething oh and it’s nice to know it’s #KellyCertified
I don’t think you can bind it to the DJI FPV Controller 2 because of the way it is wired. I think it could be fixed, but let me check with EMAX and see.
I just looked at their page, and they have a version without the ELRS receiver, just DJI plug and play (the drop-down menu has this option). So if you were to buy that one, you'd be good to go! emax-usa.com/products/babyhawk-o3-3-5-micro-dji-o3-fpv-drone/?ref=readysetdrone
Did emax happen to mention if/when they were going to have just the frame available. I've got all the parts, just waiting for a lightweight 3.5" frame with no props in view to put them in.
I fly strictly sub 50 gram and hd is not an option for me as I cut every gram I can for best performance. I understand hd on 4inch and above but why on anything smaller designed on a diet for best performance? Mabe for cinematic flying I just placed an order today and wait until you see what I have coming to my channel 😉
Nice little drone, Would have been nice to see some extra protection and some bit finished off, With this drone #DontSmashIntoSomething #KellyCertified
Again! Another great review! Like you, the baby hawk 2 HD has been my go to in most favorite quad to fly for all of the reasons you've mentioned. When the 03 system came out I jumped on board pretty quick . I installed the 03 system on my baby hawk 2. It was a little tricky and I had issues at first getting rid of the vibrations going into the camera. I did some minor modifications to separate the front standoffs a little bit and also using some rubber grommets on the camera screws. If something happens to this quad, I will definitely be ordering the baby hawk 03.
Happy flying everyone! This is such a cool hobby!
Awesome!
Great video, Kelly!! I guess this is the replacement for the TinyHawk Freestyle! I kept waiting to pull the trigger on the freestyle 2 hoping they would come out with the TH FS 3 for Christmas. Taa Daa! enter the Baby Hawk!!
It's a great looking FPV drone, seems to have all the features that you need in this type of drone. The footage looked good also. Nice review Kelly, thanks for sharing.
This is great. I have been waiting on an O3 version of the Babyhawk
Hello Kelly. Thanks for your excellent review on the new Babyhawk 03. Except for the couple of items you brought to our attention, with quick fixes, this new drone look awesome. Wow, it's looks like someone is getting some new rooftop A/C Units. Thank you for another excellent review.
Looks pretty interesting 👍 I've not yet ventured into conventional FPV drones yet but this one looks like a good little freestyle learner.
It's a great one!
Favorite quad - hands down. It checks all the boxes better than anything else out there.
It's such a joy to fly! 🤘
Oops, I need to trim the end. 😮 #KrisIsFired
You had one job! 😂
@@BAMDrones-MichaelBelshe I know... 😕
I thought that was kind of weird.
I was looking for some secret shit in the last 2 minuets there.
@@MikeMillerDronesHaha I wouldn't put it past me to add something there! 😅
Nice little bird # DontSmashintoSomething, thanks & regards
Looks like a great little quad, Might be a good option for me to get back into fpv. I still have the fatsharks but would like an affordable digital option. Mindfiled is two days away and I'm not sure I can make this year.
Hey Mel. I would love to see you if you do make it to Mindfield. I’m going to be there on Saturday.
@@readysetdronePlan change, I'll be there. I'll bring a few other rc's with me.
You need to get the UV filter or ND filters to protect the camera, filters are way cheaper and easier to replace then the camera. Looks like a great quad though. I'll have to try it sometime
Agreed about the filters - I have some Flywoo filters that I can put on it. Hope to fly with you again soon Kai!
little bits of bonus footage at the very end. Fun
😅 I just noticed those and went in and trimmed the video. CZcams will take a few hours to update it.
Thanks for watching and noticing my editing mistakes. 😜👊
Another great quad from emax. #DontSmashIntoSomething
I just bought one today. I'll let you know. It'll be my first quad :D
Nice! It's a lot of fun!
@@readysetdroneHallo. Do you record in the Emax Babyhawk O3 or in the Googles? Has the Emax Babyhawk O3 one SD Card Slot? Greatings from Germany...
You can record on either one or on both. The quad has a micro SD Card slot. The biggest difference is that the recording in the goggles is not stabilized by "Rock Steady" EIS.@@dortmunder27xxx
When the Crocodile baby comes out with a 03 version, which do you think you will like better? Will be interesting to see a side-by-side comparison. #dontsmashintosomething
Tough choice. I like the Croc Baby, but right now, having the O3 on the Babyhawk is tough to beat!
Hi nick, is this the ELRS version can i bind my dji remote controller 2 to it?
Looks like an awesome drone! Thanks for sharing! #KellyCertified
Thanks for watching!
Can you believe I am still flying analog? 🤦🏻😂 it’s only because I have FPV on quads, airplanes, trucks, etc. my wallet can’t handle the switch and I can’t narrow down the toys. 😫
But I digress, sorry for the rant 🤪 great video and it looks like a great little bird 🦅 😉👍👍
The Babyhawk series is fantastic. I love my analog Babyhawk 2. Sadly, after two years, the camera just died. I'm thinking of putting HD Zero in it. 🤔
@@SunriseWaterMedia#DontSmashintoSomething 👀
You might consider HDZero as a good step between analog and digital.
I’m thinking about getting it, would it bind to my DJI Controller 2 and the V2 goggles without ELRS? Maybe if I get it hopefully I #DontSmashIntoSomething oh and it’s nice to know it’s #KellyCertified
I don’t think you can bind it to the DJI FPV Controller 2 because of the way it is wired. I think it could be fixed, but let me check with EMAX and see.
I just looked at their page, and they have a version without the ELRS receiver, just DJI plug and play (the drop-down menu has this option). So if you were to buy that one, you'd be good to go!
emax-usa.com/products/babyhawk-o3-3-5-micro-dji-o3-fpv-drone/?ref=readysetdrone
Did emax happen to mention if/when they were going to have just the frame available. I've got all the parts, just waiting for a lightweight 3.5" frame with no props in view to put them in.
We didn't get any info on that. They are usually very responsive if you want to send their support team an email to ask.
@@readysetdrone sounds good. Thanks.
I fly strictly sub 50 gram and hd is not an option for me as I cut every gram I can for best performance. I understand hd on 4inch and above but why on anything smaller designed on a diet for best performance? Mabe for cinematic flying I just placed an order today and wait until you see what I have coming to my channel 😉
Sounds good! Agreed that it's a weird blend of small / light and "cinematic" - but this one does a pretty good job with doing both.
Any issues with failsafes with the ELRS antenna in the frame like that?
I'm not sure if the placement is the issue, but we've had a few random failsafes with ELRS on this quad over the last several months.
Where do you go in betaflight to get that voltage to show up?
It should be in the osd tab.
Hello 😊
Looks like some fun and even #KellyCertfied
Can I install GPS on this drone ?
I haven't tried, but if I remember correctly, I don't think there are enough UARTs available.
@@readysetdrone I watched emax advertisement, they say this is can be done.
Ok cool. That's good to hear!
Nice little drone, Would have been nice to see some extra protection and some bit finished off, With this drone #DontSmashIntoSomething #KellyCertified
Agreed. Thanks for watching Trevor!
#dontsmashintosomething
Like poles! 😂