How to Program Keys 2008 - 2014 Mercedes-Benz with XTOOL IK618 / W204 Mercedes-Benz
Vložit
- čas přidán 28. 07. 2024
- Here's how to program keys 2008 - 2014 Mercedes-Benz using the XTOOL IK618 and KC501. Basically any W204 Mercedes-Benz. I used an aftermarket key so the video also shows how to program an aftermarket benz key using this scan tool. Mercedes-Benz key programming can be challenging without the proper tool, but this how to program Mercedes-Benz keys shows the approach with an XTOOL device. To programme a Mercedes Benz key, additional accessories are usually needed. If you are also looking for how to add a key to Mercedes Benz, you will find this helpful. I use a cheap aftermarket key for Mercedes. Programming keys for Mercedes is usually demanding because of the cost of tools needed and additional accessories. A 2013 GLK 350 is used in the the video, but this will also program Mercedes Benz W204 cars like the C-class. Catch the full review of the IK618 and KC501 unboxing here • XTOOL scanner IK618 Re...
Get from Amazon
- XTOOL IK618 (use DIYIK618 to get 8% Discount) - amzn.to/3uvpXzf
- KC-501 programmer (use DIYKC501 to get 10% off) - amzn.to/3Snr22A
- Aftermarket replacement for Mercedes-Benz Key - amzn.to/3Wf543G (ensure your FCC ID is IYZ3312 or IYZDC)
Check out other tools & products I use or recommend - amzn.to/42LGCL8
I may earn a small commission from a purchase made through the links above. This does not increase the price you pay in any way.
Timestamps:
0:00 - Intro
0:42 - Checking the keys
0:57 - Setting up to program
1:34 - Programming the key/adding a key
5:37 - Checking the programmed key
6:24 - Reading & erasing the key
#mercedesbenz #keyprogramming #keyprogrammer #xtool #diyautoworksng #diymechanic - Auta a dopravní prostředky
I totally enjoyed making and sharing this video!😊 Hope you like it! Have you used an XTOOL device to program keys to a Mercedes-Benz? What's your experience?
hello, does ik608 program benz all keys lost???
yes, but additional adapter need M821@@Swiftkeyautolocksmith
Can u program a used key fob?
Great video. Helped me out a bunch for real for real. Didnt know my key worked this whole time 🤦♂️ 😂
Thanks! 😁
Fbs3 I guess.
Pro tip sir: the key has two types the normal type which you have, and the proximity type. Same appearance but different internals. If you program the normal to a Push Start system it will program difference will be you can't use the proximity features (the push button on the ignition and door). Another thing worthy of note sir is after programming success, as you insert the infrared keys in the EIS you'll notice the red indicator light of the key blink that shows success. Beautifully done sir normally other CZcamsrs will take 15mins for this same job and 45mins for AKL procedure.
is autel coming out with a new system? looks like the IM 608 has seriously dropped in price... also what would you advise to do proximity keys and maybe diagnostics as well? would prefer not dealing with subscriptions
@@markpasieka Xhorse
that does not do infrared keys like the ones in this video for mercedes @@bobbyomekam8043
Are the smart keys “keyless go” able to be programmed with this unit or the autel unit?
Absolutely brilliant mate, thanks for the high quality explanation
You're welcome!
Your videos are excellsnt!!!
Thanks!
Excellent tutorial. I had the xtool pad3 and was not impressed. I also brought the kc501 which I never used. i did return the pad3, so i have a spare kc501. maybe ill give the IK618 a try. I currently use the Xhorse Key tool Plus, or the Autel IM508 +xp400. your video was easy to follow and helps beginners understand the process. Next video please do an all keys lost.
Thanks, mate! To do all keys lost on this car, I also need the M821 which I sadly don't have...for now.
Awesome video bro
Thanks
My man! Thank you
You bet! No worries!
Finally here... Thanks a bunch sir
Thanks, boss. I was about to ping you that another rascal is on the loose 🤣
@@DIYAutoworksNG hehehe, give me licence to catch it (501) 😂. By the way have you made a video on it alone? Can't remember
🤣
Haven't done a deep dive on it alone. What I've just done for it is the unbox and quick walkthrough in the IK618 review video.
Hi master, is the fobik keys for Mercedes all the same. Im referring to the part that goes in the ignition. Not device/chip/mhz etc i know their different. Thank you in advance
Excellent
Thank you! Cheers!
Can you use the autel tool to program this key? Like the way you registered the Honda key.
Nope. You need an additional accessory too for the Autel.
Finally saw this video. Awesome
Will this work on my 2014 B250e full electric ?
Thanks for the compliment!
I'd say you confirm from XTOOL's function coverage tool which can be found here. www.xtooltech.com/english/FunctionQuery.html
Where do you get the aftermarket remote key and where can you get the key cut? Thanks!
Link to the aftermarket key I used is in the description. For cutting the blade, you just have to look for an automotive locksmith in your area.
will this scanner do a transmission relearning procedure for subaru cars ?
Let me take a look at the scanner over the weekend and revert.
I need to copy the key of my 2016 mercedes GLA (7 number key) . Its possible with this machine? If not what is necessary? Thanks
Sorry for the delay, I missed this.
I didn't find this model on the function coverage list, so I'd say no. Except it receives an update.
I have a 2006 cls55 with original key fob, keyless go working. Can I get an Afternarket key programming WITH keyless go working ?
Very good question. I haven't tried, but I've heard other say it won't work. Seems to be more of an issue with the BE aftermarket keys. There's a dropdown for selecting if you want to make the key keyless but just not sure it'd work. If I find a Mercedes with Keyless, I'll attempt and revert.
This tool won't program OEM mercedes keys though.
@@DIYAutoworksNG Thanks buddy, I would love to know the answer to this one! It was dealer only, but this was years ago before anyone had access to these autel and launch products.
Please I have D9PRO can I use it to program Benz keys or I should buy Ik618 I want to know
The D9PRO can program Mercedes Benz keys, but you need to buy the KC501 accessory to be able to do this.
Mind me asking how you find the ik608 Vs the d7 your videos on the d7 was enough for me to order one but only seen about the ik608 coming out after I ordered it
Both are good devices. It depends on the level of work that you do. The IK618 is the more advanced in terms of key programming and coding. But the D7 holds its own if you don't require these advanced features. The IK618 is almost 3 times the cost of the D7!
Felt same bro but take heart... 👍
@@DIYAutoworksNG I have xtool d7 and pretty sure it doesn't program Mercedes key. I was looking to get the xtool x100 along with xtool m8021. Will these work just as well?
I don't have experience with the X100 yet, and so can't tell. Contact Tech support? Should definitely advise and they are quite responsive.
How about later models? Can a D8 or D9 be used in combination with the KC501 instead of of the IK618?
Yes. D8, D9 can be used with the KC501. However, the IK618 is specialised for key programming and there will be some certain instances where it will have advantages. e.g. some Dodge keys
@@DIYAutoworksNG It is near impossible to figure out what cars are supported from their website, looking specifically for Benz x253 support.
How about X100 PAD?
If you open the right links, the w253 should either be listed or not. On the site, select products, key programmers, select the device, scroll down select immobilizer and then click on the vehicle brand. If the w253 was produced after 2016, it's not supported. Right now, I don't know any 3rd party tool that can program mercedes keys from 2017 upwards.
A bit scary I must say.... Glad you were able to fill the gaps.
Yea. I think the aftermarket key played a significant role. I'll try and see if I can get a genuine OEM benz key. To be honest the AM key wobbled a bit in the infrared slot of the KC501, whereas the OEM fit snug with no wobble.
I've also written XTOOL to check on their end as well, just in case.
The only one clear thing I would say is definitely on Xtool was the omission of that instruction to plug the key back to the KC501 for password reading. The other XTOOL key programmers have that line of instruction. Knowing the speed of XTOOL customer support/tech team, I expect that it should be addressed speedily.
@@DIYAutoworksNG Great info here!
Can it program for all keys lost on same car?
Yes, but disassembly will be required and wired connections made to the EIS.
can you reprogram used OEM Mercedes key fob? or is that something impossible?
It won't program used OEM keys. Only BE aftermarket keys.
@@DIYAutoworksNG Can the Benz Dealer reprogram a used key to different vehicle (assuming same model) ? or is it just impossible?
and can this device program a genuine Mercedes blank key?
I guess the dealer should be able to reprogram used keys but they may want to upsell you a brand new one. I'd just say you ring up a dealer and ask.
The tool will only program aftermarket BE benz keys so it won't do a genuine blank.
can this tool work on benz all keys lost??
Yes, but you'll need an additional accessory. The M821
Support for Volkswagen for Audi for Skoda 4-generation 96-bit online, 5-generation online, MQB online key matching?
Best to check here www.xtooltech.com/english/FunctionQuery.html
Thanks for the video mate,if I may ask ,is it possible to use a Xtool KC 100 to program that Mercedes key or not?
Thanks!
The KC100 can't program a Mercedes key.
Can IK618 programming tools installed a total lost key to ML 2015 Mercedes Benz. If the tools can and not available to do the installation, what are way round can a key be made available in such circumstances. Please, this is current situation am in as an Auto- key programmer. Thanks
I found out from the feedback you gave, suggesting Autel programing tools. Which Autel products mostly appropriate for programing Benz cars? I was once ordered for Autel DS 808 before I lost it. Now am really bothering how I could replace it with more sophisticated tools from Autel.
Please, my case is very urgent on this very findings. Am currently on the hot seat to install a genuine smart key for ML 350, 2015 Mercedes Benz. The Vehicle was cleared from importion a month
The IK618 will not program AKL for the 2015 ML. Autel will not either. I don't also think there's a 3rd party tool on the market that will program that car except Mercedes' in-house tool. I could be wrong, but that's what I've found so far.
2014 Mercedes E350 the xtool with your same setup would don’t read the the original key and would not connect to read EIS. ANY RECOMMENDATIONS?
Hey! Are you reading the EIS by OBD or simulation key?
I tried both no luck
By the my e350 is a cabriolet
I contacted XTOOL for support so far I just sent them my information but no resolution yet. But that they have responded with just questions.
Do let us know what xtool says. Thanks!
Hi I followed all the steps the car starts with the new key but doesn't lock and unlock any ideas
Sure the battery in the new fob is still good? Some ship with depleted batteries.
@@DIYAutoworksNG no the frequency was the problem
I changed the frequency and boom everything works perfectly
Nice! Thanks for updating.
is it better than XTOOL PADS?
Haven't done a head-to-head to be honest.
My original key is damaged what now
But it still starts the car? You can make a copy either by yourself or at the dealer.
I have a mercedes benz e class 350 2014. Do I need to purchase the XTOLL? Or do I contact you? Just trying to get my key programmed…
Hey thanks for watching. This has to be done in person, so you'll either buy the XTOOL with the accessories, visit the dealer or engage a keysmith.
For now, I regrettably don't have the structure to support commercial services.