1969 Loadstar Dumptruck Detroit 6V53 Diesel!!
Vložit
- čas přidán 7. 09. 2024
- Today I show you guys the 1969 loadstar 1890 Detroit diesel dumptruck I rescued recently with @CaseyLaDelle . Video of bringing it home is on his channel . Enjoy the sweet sounds of the Jimmy starting up and driving in thus video.
Screamin jimmy makes ur heart pump.
When I started to work for Caltrans in Santa Cruz back in 68, the other yard up on the hill had one of these trucks.
Dang near a copy. 7 yrs later I transferred to that yard and started driving it, then around 81 we got 2 new trucks.
As I remember our engine was the green color as all Detroits are, but at some time it sucked a valve and that may be when the engine was swapped out.
On ours, the Air Cleaner sat on the fender sideways, had a cut out on the fender so it sat lower, and a cut out in the
hood side to fit over the housing.
We also had a bench seat, and was an auto trans.
It was a sander truck, with the unit bolted to the rear of the truck.
Had a Bitch tank on the right side for doing Asphalt work.
It was a haul truck for everything, winters hauling slide material, summers Asphalt and Base Rock.
We had a Miller two axle with duals tilt bed trailer to haul equipment, with Air Brakes.
loved that old truck.
I use to keep her waxed and the stack painted silver, she looked pretty good.
I have been a Cornbinder guy since 66 when I got out of the Navy when I had a 64 C1000, 266 V8 and 3 on the tree till it kept popping out on 2nd and one day I shoved that sucker back in and bent the lever straight up.
Dropped her off at International and had a new truck 4-spd installed.
Had the 7ft bed and Step Side. Painted it light green along with my Horse trailer, was a good looking rig.
Wish I had kept her.
I have a 67 1500B 1 1/2 ton I bought back in 72 and still have her. 4 spd with a 3 spd brownie.
This is great, I love finding new channels on CZcams! 😂
🤣🤣🤣
😂
I was told there would be punch & pie…by some guy in a tow truck😊
Definitely rare truck. Especially with the two stroke detriot...
Here in Australia not rare at all 1850 Loadstar Diesel came standard with 6V53 Linfox had them, Panucci had them, full air s-cam brakes and a seat wide enough to sleep on 👍
A good Detroit mechanic can adjust the rack to make that 6v53 pull like a Mack on the low end. These engines can live a long time
I have a 1964 Loadstar 1800 with Perkins 6.354 turbo diesel rated at 152hp (gross) on the door tag.
It has full air brakes and hydraulic ram power steering.
5 speed IH transmission with 2 speed 18k Eaton rear.
25,500 gvw; regular drivers license in my state.
Has a neat vintage EGT / boost gauge on the dash.
Seems to have every available option for that year.
Also has a vintage SW (Stewart-Warner) gauge set, and they still work.
Air pressure, water temperature, oil pressure, battery voltage, oil temperature, and air cleaner vacuum / restriction.
Both batteries and all the tires appear new.
I have never seen another Perkins Loadstar.
All the others around here are gas-powered; especially when that old.
When I first opened the hood, I was in shock at what was in there.
First I thought it was a farmer conversion with an engine from some old equipment like a combine.
But it was done too good and no way they would bother doing the air brakes, exactly like factory, on an old farm truck conversion.
Truck was not advertised in auction ad and it occured day after Thanksgiving holiday.
Hardly nobody bid on it, won it super cheap; was bidding against the scrap man.
I just held my hand up constantly and stared at the junkman.
He looked at me and knew I was going to buy it or make him overpay.
He would have destroyed it hauling scrap, until it needed any repair or maintenance and then junked it too.
I don't think anyone knew it was a diesel, until I immediately paid for it and drove it away.
No diesel badging on the body.
The cloud of smoke at start up, while auction was still going on, let everyone know.
Truck is in great shape and fun to drive around.
Everything still works, all lights, heater, and windshield wipers.
Reminds me of an early Cummins 5.9; same size, hp, and arrangement.
It is a dry sleeve engine; but hopefully, I never need to rebuild it.
I would like to replace ALL the gaskets though, getting old.
Head gasket looks fairly easy to replace and can inspect / replace wore fuel line or turbo components at same time.
I'm adding a 5.9 grid heater to help cold starts since the grid heaters are so unbelievably cheap online.
That will save the batteries and starter motor from wear with faster cold starts.
It already has a block heater.
The truck spent its life hauling grain once a year, from the fields to the storage silo's and stored in a dry wooden barn rest of the year. That's why it's rust free and frame looks new still.
Somebody bothered to show it some love, but I don't know how it ended up unadvertised in a farm consignment sale; maybe the original owner died.
IH offered the 354 Perkins because of the Canadian, Australian, Indian and Great Britain markets.
They derated it to 132 (net) in brochures; I don't think they wanted to sell the Perkins engine, cost too much profit margin for IH.
But IH did want to offer at least one diesel and not from a direct competitor (gm).
IH wanted to offer something for high altitude use (turbo) and operations that use diesel fuel only; like a trucking company yard spotter or military base use.
The Perkins 6.354 turbo barely fits in the Loadstar engine bay, and it took special cutouts in the firewall; turbo is nearly hitting firewall.
At least it's easy to reach everything with the butterfly hood and a straight six. I think I could do an in-frame rebuild; but hope I never have to, unless I have racked up thousands of hours and wore it out from use.
Then I would gladly in-frame rebuild it.
The foreign markets love that engine; used in Massey Ferguson tractors, combines, fishing trawlers, and medium trucks.
I would like to remove the pto hydraulic dump grain bed and add military axles, rear steering, 52" tires, divorced transfercase, and a Holmes 600 twin boom + pto winches, mechanical wrecker body that I already found.
Truck would be a great offroad wrecker and give it a new way to earn its keep doing difficult recoveries in remote locations like Moab.
That's how it survived this long; and the dry air there would help it survive long enough to actually need a rebuild someday.
Wooden barns are great for storing vehicles; less moisture.
The barns will all be be gone someday; get torn down around here constantly; so the days of "barn finds" will be ending....I am getting everything I can now. Small farms are being bought up by factory farms; the small farmer auctions off his equipment and whatever has been in the barns for decades; might be why my Loadstar showed up at that auction.
My lifted K30 with Holmes 500, will be its work partner.
I found the original manifold preheater on ebay for cheap. I am re-installing that instead of converting to the square cummins heater. My guess is they had trouble finding a replacement decades ago, and now we have the internet to find parts. Found injector pump rebuild kits and injectors in foreign markets. Australia, UK, India, China, etc.
I drove a 74 co4070A with a 318 Detroit,almost deaf because of it, but I would do it all over again without hesitation. Everybody heard you coming and going and knew what was under the cab
I have fond memories of the 6V53T which screamed next to me during my time as an M113A3 driver. Never had any trouble with it.
I love the videos where some old street dog gets adopted cleaned up and fed, I get the same fulfillment when Ben buys a worn out dirty old truck
I have a '74 International PayStar 5000 with a 8V71 it has the square fenders.
Got to get it from wanting to over heat.
Luv your truck there.
You have a nice inventory of IHC Scouts and pickups. I used to drive a '68 IHC 1200 stake body with a plow and a 304 V8. In 4X4 low you felt like you could plow a house with it. IHC engines were POWERFUL.
God thats a badass truck! Its in amazing shape for its age! The heil co is a big player in the garbage truck game. They made some other products, but i cant say i have ever seen a dump truck body! One of my old garbage trucks has a 6v53, just a total screamer!
IH and Detroit Dripper for the win!💪👍
Always loved the cornbinders,Well made back then ,Most schoolbuses IH
I knew a guy who worked for General Motors and his specialty was the 653. He said it was the only engine ever designed that created diesel fuel to decibels without making horsepower or torque.
yeah except.. everybody said that, and everybody still says it lol. It's not really true though it has good power density, and can go up to 300HP, or 350HP in military applications where you don't care if it blows up early in it's service life. It's 160hp stock, 200hp with larger injectors, 230-250hp with a turbo, and you only get to 350 with DDEC and lots of turbo.
Allegedly, the 53 series was the mos efficient, when comparing HP to weight ratio.
I have worked on the 671, 871 and the 653 and IMO the 53 is one of the easiest to work on.
Now, if only I could find a rare 8v53...
Diesel into decibels with no torque. Yup, that's Detroit Diesels.
Smoke. You forget smoke. And vibration.
They make smoke and vibration along with decibels
Nothing wrong with the 6V53 driven properly they went very well operated one for many years hauling livestock pull in a 28 ft 3 axle drawbar
trailer 21 ft deck on the truck 2 deck sheep 1 deck cattle had a very long working life 17 years on stock and then some years on other work in fact still running today
6V53 5x4 twin stick transmission drove it myself for almost 1 million miles great truck
The Orange really cleaned up nice!
Good stuff use it most all the time
Kubota orange often works good... Top level truck!
A guy would have to say “pretty rad brother”
""THE-OLDASS TRUCK IS THE-REALDEAL HOLYFIELD""!!!!!!!!!!!!!!!
The Heil Corporation makes mostly Automated garbage trucks now. My older brother worked for them for a while, got to travel all over the world. He also helped develop their armlift for residential garbage cans. Anyway they have also manufactured tanker trucks.
This Loadstar is a rare bird with the big external air cleaner. I remember that they almost all had 345 or 392 gas V8s or later the MV404 and MV446 gas V8s
6V53 standard motor in 1850D Loadstar, magnificent, pity they didn't offer the Turbo as well, a hell of lot here in Australia, Panucci had em as did Linfox both on tankers, just brilliant jiggers, full instrumentation, full air s-cam brakes, power steering,👌👍
aerosol overhaul! the old girl looks pretty good.
That will last longer than a new truck
I am seriously drooling over these internationals especially the crew cab and the travelall!
Cool old binder
Wow it cleaned up great for just using pressure wash, no soap no scrub, it's in good nick , worth restoring it
53 put out close to the hp of the 71 series. Less torque, but higher rpm and lower gears. Probably has N45 injectors and puts out something like 210 HP.
Nah this is an older model.. unless its been rebuilt with different parts, its gonna have a 2 valve head and make 160hp. It's possible its a 4 valve head but the 2 valves didn't go away until the mid 70s.
Very nice dump truck!😊
Heil has been around for a long time and more known for garbage truck bodies. They are owned by Dover's Enviromental Solutions Group. Built their fist garbage truck bodies in the 1900s and by the 1930s they were being used in 100s of cities across the US. I assume for a awhile they made dump boxes but now just build garbage collection bodies.
Killer fleet and yard.
I 🤔 seen you an Casey haul that ole girl in. Wow 😳 she cleaned up nicely. That truck will do a great job for you.
Great Video i can't believe that Ole Brute has an Automatic have the Alicen in my 2012 GMC pulls anything
Wow nice truck haven't seen a ht70 Allison 6 speed very often.
very cool old truck friend
I worked on/drove 4070A back in the day, they were much bigger than yours. Some of them had 6-71N (inline) and some had 350 Cummins in them. Our drivers loved the Cummins power, blew the doors off the Detroits, and way less noise. The Cummins were super reliable as well.
I have a 68 1890 with a 6v53. 5x4. Tandems. Dump truck.
Pretty rare. Not fun to work on.
She is a jewel
Love the old binders! Miss my ‘76 scoutII .
Love the videos! 🙏❤️😎🤙🛻💨
I'll take it!
Dad had a 69 T-950 Ford with a 6-v53 Detroit & 5+4 Spicer.
Cool looking dump truck after power washing it. Maybe some rubber gloves would help with the power?
Thanks for the video
But that's a sweet old cornbinder you got there
Nice Loadstar. Try Spray Nine. You'll toss the Simple Green in the trash afterwards...👌
I love the dump truck
more than likely it's specked out for city use with tight turning
👍
Back in the day I had the same
But had a 5 speed 2speed rear 9foot box
Heil was a Milwaukee based manufacturer, one of the city's early industrial companies. They also made furnaces. International Harvester had a foundry in Waukesha, a small city located just southwest of Milwaukee.
I use the simple green in a two gallon garden sprayer
""IT IS BUILTLIKE A TANK""!!!!!!!!!!!!!!!!!!
Morning Ben....
Good to see you back online!! Nice dump truck!!
Safe travels, friend ❤❤
Stay FROSTY...
Keep your powder dry and your head on a swivel...
🇺🇸🇺🇸WWG1WGA🇺🇸🇺🇸NCSWIC🇺🇸🇺🇸
Dear 406 Garage.
👍👌👏 It looks like a pretty solid dump truck. You mentioned that you like this vehicle. So please kindly allow me to ask: Why not modify it to be able to pull a trailer with air brakes?
Thanks a lot for making teaching explaining recording editing uploading and sharing.
Best regards luck and health in particular.
Another VGG viewer 😅 -anywhos, it might look cool all custumized like a semi 😂 Hey, have VGG come and drive something home from your yard 😅
That is correct Heil is a body manufacturer....
I have a 1968 Ford with a heil dump body. Similar to that
Ben are you going to clean out the dump box ?
Someone at ODOT cried the day they got rid of that truck.
Imagine cramming a 8v71t into this
wouldn't even come close to fitting...
@@Wingnut353 i know but id be cool
I used to work for an International dealer that was also a Detroit Diesel dealer for decades. I loved the 6V53 engines but hated working on them in those old trucks.
Hanging over those fenders was awful.
PS: your engine is not turbocharged.
Lol last airride seati bought was $411 to $433 at cook brothers in 2011
non turbo. blower only.
Maybe in that year we used to own a 77 and had a international engine d 466 and was blue from factory.
In Casey's video the other day you said it had a "Super Charger", that's just a blower on a Detroit, and now you say it's a "Turbo Diesel", I didn't see a Turbo siting on top of the blower??
It's not a 6v53T... it would be much quieter with a turbo on acting like a silencer.
I want to watch the truck dry….can you show it drying next video😎
There is a 453 with a 5&4 on Seattle Craigslist for sale
Dude.. I want one so bad.. old International with 6v53? U got a ton internationals it looks like.just found ur page.. what's the wood on ur shop and house??? Western red cedar???
wonder if the wiper works ...
2:05 Old Spice. Is that your phone?👍
Yep
@@406garage3 do you know what model Allison Transmission is in your truck ?
ben do have ih 1951 l 130 dully
So you are saying the 1900 loadstar I drove delivering home heating oil was non existent ❓‼️❓
How much oil 🛢 pressure do you have?
60 psi
Leave Door.
Does anybody know where i can find a detroit diesel truck with jake brakes with juices brakes. Im located in Cleveland Ohio and cant find anything.
Didn't clean the engine bay.
""THOSE-OLDTIME 🦕DINOSAUR-TRUCKS WERE VERYLOUD BACK IN THOSEDAYS OF THE-1930's, ""THE-1940's AND THE-1950's""!!!!!!!!!!
I'm looking for a 6v53 dump. Lemme know if you're selling.
Nope not easily with that scatter shield out of the truck
Is it for sale?
Yes go to our website and call the shop
406garage.com
I keep sending you pictures of a ih truck but you don’t get back to me
I get over 100 emails a day sorry
How much ?
Call the shop
406garage.com
How much you want for itb
Call the shop
406garage.com
Does everyone wanna be like Derek from Vise grip garage lol?? 😅Craig list the wheels?? Comon ppl get real
if he would just shut up we could hear the engine and not his big mouth
""OLDTIME DINOSAUR-TRUCK FROM THEDINOSAUR-DAYS, ""NO POWER-STEERING OLD AND OUTDATED""!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Crappy engine and transmission. Those detroits are the absolute worst for work. Slow. No power. No torque. I’d rather cut off my toe than drive any Detroit even modern Detroits. I’d run that truck right into the scrappers and say thank you for getting this piece of crap out of my life
Yip for the pressure washer. Get some pool noodles at the dollar store and tape them on tightly. Helps stop hand cramps.
🙏❤️😎🤙🛻💨
I drove one of these slow moving veichles the noise drove me crazy ,I pulled the pin didn’t eaven ask for my pay ..For two weeks my ears kept ringing like crazy ,,,Pulling sand there was one hill I swear I could walk faster not impressed at all all noise no power that’s my 10 cents worth 👍👍🦘🇦🇺🧌