Test Riding My 85cc Top Performance Rieju RR
Vložit
- čas přidán 7. 09. 2024
- www.blocket.se...
Today I’m taking my 80cc Rieju RR for the first test ride, the carburetor is not configured yet and the cylinder is brand new so I won’t push on it but I still think it turned out to be an interesting video to see the first ride with 80cc tuned moped.
🎥Hope you I'll enjoy this fresh upload!
👍If you do please leave a like and subscribe for more motovlogs and edits!
📷 Follow my Instagram (@SNTMOTO) ►bit.ly/2JsUl17
👻 Add me on Snapchat - SNTMoto
😃 SUBSCRIBE ► bit.ly/2JbEAyB
Tags
#SNTMoto #MopedTuning #MopedStunt
Rieju “YZ” MRX Setup
Turbokit Chrome Exhaust
Sport airfilter
11/48 Gearing
NGK BR9EIX Spark plug
TPR Rieju Drac RR Setup
85cc Top Performance Racing Cylinder
Reinforced Top Performance Crankshaft with 44mm Stroke
SCR Corsa 70/80 Exhaust
26mm PWK Carburetor
RQ Shortneck Intake
Malossi VL6 Membrane with Carbon Reeds
Malossi Racing Clutch Springs
NGK BR10EIX Spark Plug
📷 My Cameras
► GoPro Hero
► Oneplus 6
► Pentax XR (For Pictures)
🎵 Music
► Ivan B. - Teenage Dreamers
📷 Följ mig på Instagram (@SNTMOTO) ► bit.ly/2JsUl17
👻 Snapchat - SNTMoto
😃 Prenumerera ► bit.ly/2JbEAyB
🎥Hoppas ni gillade videon!
👍Om ni gjorde det glöm inte att ge videon en stor tumme och och prenumerera för mer edits och moto vloggar i framtiden :D
🇸🇪 Swedish / Svenska 🇸🇪
Idag tar jag första provturen med min hyper drac, den är inte 100% inställd och cylinder behövs köras in då den är helt ny så kommer inte maxa den men tyckte det blev en bra video ändå som jag tror många kommer uppskatta att se den här trimmade moppen köra och den är även tillsalu då jag vill börja stunta och göra lite 50cc moped stunting videos igen
Yo bro i was reading the comments and i saw that people were saying things about the engine braking and talking and stuff but dude ur fkn amazing keep it up bro i really enjoy ur vids and they are just perfect and oh yea before i forget you didn't engine brake like once so yea they are just jalouse at the bike. Have a nice day dude
♥️♥️
I completely understand you. It is awsome riding when you dont have to worry about getting a single scratch. Keep up the grind!
Plus, that thing would use a hole tank in 20 minutes😂
Yeah imagine if I started doing wheelies and stuff and looped this one wouldn't be too fun 😂
@@SNTMoto i would cry for a whole week probably
It's quite a posh bike, so I really like it that you just take it on the dirt roads instead of just keeping it in the barn "because else it would get dirty"
Yeah it's doesn't look like it belongs on dirt roads but it's not fun to just look at it :)
2 thousand euros for a moped like that is so cheap, in the Netherlands you would pay double for that haha
Yeah bro u can get this with same mods for less than 2k tho
Nice Video Mate🔥 Keep on going🔝
Thansk man :D
Please buy Honda Hm. These bikes are the best! (Even better than beta rr)
Nothing beats a beta rr when it comes to mopeds 😉
But they're super cool
@@SNTMoto thats why i bought a beta rr and greetings from Finland
@@SNTMoto apart from a fantic casa.
Omg.. 😮 it’s finally here!
Better late than never :)
Iv got a ktm exc 125 2005mod that i wana trade against this one😍
Do ittt!!
I would love to do it :D
@@SNTMoto yeah like im not joking add my snap bpreiss3!!! And well talk there
@@benny5394 I added bpreiss3 on snapchat now :)
oh boi, gonna miss the bike...
but i can totally relate to that :D
btw i am the weird austrian rieju mrx and derbi drd guy from insta c:
so we already talked about that xd
I wouldn't call you weird but well 😂
@@SNTMoto maybe you're right but so now you know exactly who i am haha
Do you know where i could get 03-06 Rieju RR brake parts (calipers, rear brake cylinder
and brake discs) to finland.
Ive bought a lot of brake parts from a swedish moped tuning website called twostroke.se I think they ship to Finland as well
Love your vids! Keep it up!🤘
Thanks man 😊
Well, you are pretty correct about what you said. I have spent way too much time and money into my yamaha dt 50 mx2, that I can't really do any stunts with it...
I'm sure you could if you put in a lot of time practicing but I'm just going to say it easier with a less aggressive power band :)
Grym video! Fortsätt med det du gör! :D
Tack, försöker mitt bästa :)
I love the spark plug blocking for the fan switch 😀 i have the same practic 😂
Sometimes you got to do what you got to do, I really wanted to start it up and ride it and well I didn't have anything to put there except a old spark plug
awesome videos ihave myself 86cc ch racing and yamaha dt 77cc😍
That's awesome pro bet they're really fast as well
mopoikä kokoikä you should do a video of your bikes!
your right ear is vibing.
What jets are you running? I have a aprilla rx 50 supermoto with a 80cc BBK. I'm tuning my jest and it runs crap on a 105 main jet and runs a little better on a 95. What your opinion. It runs rich and it's on a 19mm carb
I had a 148 main jet in my 26 pwk maybe. a little to big big it ran decent
put a smaller jet and then try to put the choke on. when it goes better with choke it needs a bigger jet
Den såg ju riktigt go ut på blocket
So god damn good video!
Glad you liked it my friend 😃
The break in is going to take way more time with 4% oil. Just use normal amount 2-3%
Maybe it will take longer but I want to run 4% until i know the carburetor is dialed in perfectly
So nice this bike😍
Thanks bro 😊
Dracen låter rent gött asså👌
Blev riktigt överaskad hur bra den lät 😅
Your Reiju is soo sick dude😍 What gearing do you have on it? Also congrats to your channel getting monetized😉
I'm currently running with 13/48 I feel like that's a balanced gearing for 80cc so you have both top speed and acceleration
when you do builds do you buy all the parts and build it or do you buy a bike and then mod it
I find a cheap bike so I never know what I'm going to get until it appears for sale and then I plan the build and find parts for it
SNT Moto ok thanks but Were do you get that type of bike the only 50cc bikes i have seen are stuff like the pw50 or like kids bikes
@@milashansen1497 In sweden there's a lot of mopeds so moped forums, buy and sell websites and from friends
SNT Moto ok
Could u know where i could buy that pipe and do u know any place to buy those same rims cuz i have a Rieju RR too and i have used 1 year looking for supermoto wheels i live ibn finland. (btw love ur videos)
Seems to run hella nice with that 26mm
For real, I'm really surprised over how smooth it's running
@@SNTMoto yeah, smaller carbs make engines run smoother because its easier to pull air through it on low rpms.
Yooo🔥🔥🔥💯
Yooo
remember to pull the clutch when letting go of the gas
Engine braking for short periods like has doing wont damage anything
Yee yeah but the short period when you let go of the gas, the slide is completely shut so its still in high rpm but cant get any fuel/air mixture
@@Bidalotroxi yes but theres still gas left in the cylinder for a small amount of time, it only starts to cause damage to the engine when you're doing it for long. And from what I heard he doesn't let go of the throttle enough for the engine brake to actually kick in
I wasn't engine braking I was giving a tiny bit of throttle and then when I let of completely then I pulled in the clutch you can see that in a few clips
anyone know where can I get sm wheels for a 1998 Rieju RR?
Sett på noen av dine vids nå, helt sykt alt du gjør. Alt er til salgs for rett pris yk, stor hilsen fra norge
Finally😍
Check the sparkplug and check if its running way too rich
Because I'm only riding on a short stretch of road when I'm just acceleration you can't look at the sparkplug you need to go a longer distance
SNT Moto yeah thats right but check it when you the break in is done
You will hear and feel when its running rich no need to check sparkplug
Waltteri its better to run rich when u have new cylinder...
Dongge but if you want the best performance then reading sparkplug is the best way
how did you shine the rims up like that?
btw love your vids! keep it up
Sanded them down and then polished them with a buffing wheel and buffing wax that my dad had laying around
@@SNTMoto with what grid sandpaper did you sanded it down?
@@jasperindermaur2435 start 2ith 400 end with 2k
Du borde varva ur den där mer för o se om den går helt rent men den verkade gå ganska rent efter du fixade med nålen men fortsätt kör o kolla stiftet och testa hur den går med mindre munstycke osv, Du borde köra 98 det mår cyllen bättre av och typ 3-3.5% olja
Får testa byta lite munstycken :)
Var fick du färgerna ifrån och vad använde du för att få de så snyggt! Skulle gärna vart nice med en turtorial!
Du är king
Du med som kollar
Såg annonsen på blocket hoppas någon köper den
Yes vi får hoppas det :)
So you mean you can do a powerwheelie in 100km/h with that 80cc??? 😂I bet you have to clutch it up...
Hans roger Knut Well almost
You can clutch up a power wheelie too 😉 Depends on what your definition of it is 👍
Yeah I meant going fast in a wheelie, power wheelie for me is keeping it up with power over being on balance point
Hans roger Knut a yamaha yz 85 will do a power wheelie by leaning and using throttle in 6 gear at 100kmh my friend has one
Posin I thought the top speed of the yz 85 was arround 60 mph, correct me if im wrong, but it does not sound right that you can powerwheelie a bike at max speed, right?
what does the SNT in your name mean ?
From the begnining nothing but one of my friends came up with "Show Not Tell" which means do things instead of saying you're going to do things
SNT Moto but now u are talking more than doing 😂 no front
@@yannhayon2796 Well this video is an exception 😉😅
SNT Moto 👍
Eyo Wattesapprewan
😂
lagomt med slött
how come u have 2 spark plugs on the cylinder? how does that work?
One is just blocking where the thermostat normally sits because i didn't have anything else to put there
@@SNTMoto ohh
Would dubble radiator make big diferens? Nice work btw👍🏻
Nah, its such a small cylinder and it cools down quite easily so the stock single radiator is fine.
Also 2 strokes run cooler than 4 strokes because each cycle/charge cools it down.
I've got a few recommendations about 2 radiators but I'll stick to 1
@@SNTMoto got a single peugeot xps radiator on my bike and it work just fine raced it in endurance racing 3hr straight race on gokart tracks.
so to me it feels lot of overkill to go dual radiator on a bike that is used casually on street and in dragrace.
What paint do you use? From which brand
Alfa Romeos version of candy red, basically the same, I forgot the code but it's almost the exact same ingredients :)
Layers
1. Good Primer
2. 1 Component Metallic Car paint
3. 2 Component Clear Coat made to work with the paint.
Wow! 20000 swedish dosent seem much for that bike!? In the faroe islands you could get alot more i think! I would buy it for more but yeah!
Maybe but at the same time I just want it sold so I can build a stunt bike
SNT Moto yeah i understand hope you can sell it so we can get a build or a new bike on the channel!
The video I have waiting for👌👌😍
Awesome, hopefully some brake in clips did justice :D
Wich clutch lever do you have on the Rieju?
just write "two finger clutch lever" to google
N-O-A-H just type ”easy pull clutch”
@@stfu4871 thank you
Easy pull clutch lever from ebay
N-O-A-H he has a video on it its pretty old but the OG subscribers would know😉
Nice shoes
Best garage shoes in the game ;)
najs video man
Max speed
is this moped street legal ? ;D
Not at all
SNT Moto 😉
1:55 vad fan har hänt med insugsgummit? Varför ser det fuckat ut?
Det är bara smutsvatten som torkat haha
🔥❤️
Vad är skillnaden mellan rieju drac och rieju drac rr?
Det är samma hoj, den heter Rieju Drac RR men de flesta säger bara drac eller rieju drac
@@SNTMoto okay👍 thanks
I mean isn't breaking in a myth at this point? I know it's a huge debate, but I don't think you need to break in the bike for hundreds of kilometers honestly. Specially if you have a solid bottom end with a good crankshaft. Top end replacement is not that expensive, if you take proper care of it it should last you a long time regardless if you break it in like a grandma or not.
On cast iron cylinders you need to give the Pistons rings time to adapt to the cylinder because if not it can seize you cylinder but on aluminum cylinders you can brake it in just letting it idle
vad är det för kopplingsgrepp?
Easy pull från ebay
@@SNTMoto ser att du haft det på många så antar att det passar på allt?
2.5% would be good, i use 2% at normal drive that 4% is waay too much what there should need
but he runs 4% now to not risk anything while breaking the engine in. better more oil than less.
Just don't want to damage it during brake in I mean you can't be too safe
@@hugodavidsson2652 well im building stage6 77cc big bore rieju mrx and im still going use 2.5-3% oil, but everyone do like they want.
when u get a new cylinder it can be good to drive with more oil
För mycke olja kan även skära motorn... jsg skulle säga att 3% är ungefär lagom typ
Only drive with 3% oil when your braking it in, 4% is to much that could damage the engine
I'm pretty sure 4% won't damage the engine but I'm missing out on potential power with a high oil mixture but I want to run 4% until the carburetor is dialed in perfectly
SNT Moto well just watch out since oil gets really hot and when you have so high mixture your cylinder can get really hot. And in worst case damage the cylinder. I’m doing 3% and it’s working fine for braking in with :)
remember not to engine brake with that 85
With 4% mix, engine brake does nothing to that engine, and even with 2% its very very very hard to break thw engine with engine brake....
I didn't engine brake in this video I pulled in the clutch when I let of throttle and most of the time I gave tiny bit of throttle so it would get enough to be lubricated
@@SNTMoto yea but i just told him
Köp en ch eller typ stuntkitta en mrt de skulle nog varit rätt unikt, har inte sett en enda stuntkittad mrt
Min polare had en sjukt cool stunt kittad mrt och det är inte så ovanligt men hade varit sjukt maxad gäller bara att htta en för bra pris
148 main jet is too big dude.
Maybe but you can start with the biggest and work your way down until you find something that works good :)
What is This Bike made for? Is it made for legal moped riding or like stunting or something?
I built it to look good at a show and the engine was built just to make it more interesting but I guess race bike would be the best category
såg den på blocket
Everybody understands
That would be great :)
Slö 😍
Självklart 😘
Bogging in English it's known as bogging.
Why not stepping up to a 125? You are not old enough?
I don't have my license yet, hopefully later this year tho but I won't promise anything
@@SNTMoto ah i understand
kickstand? NO!! Im cool so im gonna use a sportbike stand, wooow look at me
Haha tbh I can't remember what happened to the kickstand but it has a lowpass exhaust so It can use a normal bike lift when I work on it therefore i had that swingarm stand
Noo why do you rev a cold bike 😩
When you start it I've to give it a few revs because if not it will die but then I have it idling for a few minutes before I rev it more and go for a ride
Invest in a innter rotor
I can't even afford fork gaurds at the moment
SNT Moto Oh, it’s alot of fun with a inner rotor though. Maybe mvt premium or italkit. I got a Airsal 88 engine with mvt premium and koso 32.
dude u have to get out on asphalt and top speed the bike
No it's a brand new cast iron cylinder so you need to brake it in before you can test the top speed and cast-iron cylinder brakein takes way longer than aluminium
1
PLEASE PULL IN THE CLUTCH AFTER LETTING GO OF THE THROTTLE, THAT ENGINE BRAKING HURST MY SOUL AND EARS
Bro I didn't engine brake I was still giving a little bit of throttle I pulled in the clutch when I wasn't giving throttle I've learnt
Its not that bad anyway. If the carb is tuned correctly its fine.
@@edwyn5442 how does that have anything to do with it?
@@theodorstrandberg1319 cause at idle the amount of gas and oil will be enough
Yes I do agree with that, the only time I have had damge due to engine braking was when my carb was horrible tuned and I've been riding mopeds for over 2 years and always engined braked but I've started to avoid it just to be safe
svenne
Köp ch
Om jag hittar in billigt
SNT Moto de ligger en för 16 k på ts köp o sälj nu
@@victorjohansson3854 För dyrt för mig
eka
Du gasar ju aldrig ut den helt
Tar det försiktigt då det är en sprillans ny gjutjärns cylinder
du kommer inte få 20k för den
Hmmm med tanke på hur fräsch den är kan det vara fullt möjligt. Bara han hittar en dum 05:a
Vi får se 20k är rimligt bara att folk tror drac är skort men de är faktsikt sjukt bra moppar bara bad image men priset går att diskutera samt att moppen är stortsätt i nyskick
@@SNTMoto kommer dessväre inte hända, hitta en bortskämd 05a som föräldrarna inte bryr sig om så kan du nog lyckas
You talk too much
It was one of those videos when I wanted to get a lot said