I just bought a used F75 after Christmas. I have been using the Legend with good success....so I decided to take the F75 over areas that I have already gone over with the Legend. To my suprise I was pulling out all kinds of targets....most of them were deep...including 4 silvers. So I have to agree with your video. Thanks for sharing your comparison!
It's great to hear! I have several multi frequency machines. Like them a lot on the beach. But in an iron patch give me f75. Appreciate you watching 💯🇺🇸
I've run my 75 for over 8 years and never once regretted my choice. of buying it. It is a very good all-rounder. Goodness knows how good the all new FT Single Frequency machine is going to be when it comes out. Awesome, no doubt.
Ive had good success using the Fisher F 70. The machine is very light coil design is great. Battery life is really good to. Just another fine detecter in the fleet.
Good afternoon 👍excellent video I have been walking with Fisher F75 LTD for 3 years now and have never regretted buying a decent professional device. Basically, I walk with him through the field and forest, he sees small goals perfectly. Compared with XP Deus in depth and separation of goals, the result is the same, Fisher is not inferior in anything. Have a good search, my friend 🤝🔥⛏️
Another great test for the 75 is iron above the height of a coin.2 plastic Chinese food containers side by side with square nails on top of each container, leave a couple inches between containers with dime on ground between containers. Set disc 18, FA speed,DP tone, sensitivity 95 .Listen for repeatable squeak. I use this setup around cellar holes with a lot of iron. F75 is very good, if signal isn't repeatable with 18 disc i move on,detector is very reliable about signals. I mostly use 5×10 oval dd coil.Would also like to see you try minelab in fast recovery 15hz close to fisher 13hz. Great video 👍
Thanks for the watch and the comments. Another friend of mine wants me to try single on the Nox. It will hit the 11 inch dime in single but still struggles with that target in iron. Most guys buy the Nox for the multi frequency. Sure appreciate you stopping by. And i will get a video up before long with single freq on Nox.
You took the words out of my mouth. I'm with you on this one. I got rid of my Nox 800 because I did not like the tones. I just couldn't get use to the 800 and there's too many settings. I know a lot of people like that, but it can get to be too many. Went back to a single frequency T2 SE.
Thanks, I have many detectors, decided why not another one, did a lot of research and videos, pulled the trigger on one today! Thanks again, great video.
The F75 is the first really good detector I ever had. It was great, I sent it off to Fisher to update to the LTD and it was never the same. One day I will get one that is an original LTD SE, not updated, and try it.
Soil conditions also play a BIG part in depth and the "halo leaching" effect. I can tell the difference in my AT Pro just switching from the standard coil to the NEL Sniper coil. Definite depth advantage. Thanks for the demo FA! All the best brother!
Good video, brother. I do miss my t2 LTD once in a while. Nox tones do kinda suck but I’ve done well with it this time around. But, whenever I pick up the DEUS I forget about every other machine I’ve owned. There’s nothing like full tones on DEUS.
Hey bud yea i had ORX but i have a ton of great performance out of my t2 and f75. Its like trucks a guy just likes what he likes. The deus is a nice machine. Thanks for watching my friend!
@@PaystreakSuperfreak hey, Jeremy. Yep the DEUS with just ws5 and no controller is super immersive detecting. It’s also the best machine in iron I’ve ever used. Period. Talking dense square nail patches and big iron. I know you know!
The Nox is being used in multi freq because thats the sale point of this machine. It will hit the 11 inch dime harder in single freq 15kh. The iron masked coin still gives it trouble with similar results as multi.
Up to 3 times i had and tried the Equinox.. sold it 3 times on a row. Still i feel the Equinox cannot be a bad detector , lots of people use it with lots of succes but it just was not for me . It gave the best of signals even on a banana, so to be honest this vid actually surprised me a bit but fact stay clear that it is not a very reliable machine at some important points whereas lots of older machines , the original Minelabs gave such good tone and target ID .. Liking the way the F75 works man 💪🏽 Back in the days lots of things where just better.
I posted a video around this time last year (2023) with a pretty cuff button as the thumbnail where I was using the F75’s cousin, the T2 and my buddy was using the Nox 800 and I dug a few pistol bullets and a nice cuff button. My buddy didn’t dig anything…. nothing. Not saying the T2 is better. I’m sure I just happened to walk over signals and he didn’t. But all these fellas run out and buy the next new thing lol. I’ll stick with my 9 year old T2 lol.
Fishers are hard to beat, but some people don't want to hear it, I have one along with the CZ-3D (Old Ser Number) along with the CZ-21 3D is magic on nickels and bronze coins, just a little heavy with a bigger coil. Have a Madicore on the way, I will check it out Thanks for the test , nice to review it again so tired of a certain 3 company's :))
love it brother .. I hunt with a guy with the nox 800 .. it's a good machine, but he's not outhunting me, not by a long stretch...he keeps coming up with the "you're hunting with old tech" .. I keep telling him to prove his 'new tech' is better .. he hasn't.
Agreed 100%. I used 800 for 6 months every hunt. It shines at the beach. But inland f75 t2 are my go to picks. Thanks much for stopping by and always supporting the channel my friend!
I remember having the same experience with a friend who had a shiny new Whites Spectrum, and I using my old Bandido. He stopped hunting with me. 😅 he actually laughed at my old Tesoro. Not for long.....
I run the Fisher F70, and the old trusty Bounty Hunter tracker IV. The Tracker isn't fancy but seems stronger with deep signals. Could just be the ground I hunt. Great video.
Absolutely. I hunt mostly dense iron sites. And I spent a great deal of time on other machines and simply get the best performance in my area with F75ltd in iron. No hype no joke no marketing just get more non ferrous targets out of the ground with it. Appreciate you watching and commenting 👍 👍🇺🇸
great video. Thanks. I've really heard some great stuff about F75. I hope the stories are true about its depth capabilities cus I'm probably gonna buy one. I see it squeaked on the 11 inch dime. How deep do you think it hits on a quarter??
The truth is it just didnt out perform the f75 .. I made the video long on the Nox part just to show i was doing all i could for guys that think i would ground balance on a metal object. It was a fair match up. Both machines were ground balanced in the same spot, properly ground balanced. This aint my first rodeo slick🤓👍
Thank you much for stopping by. T2 is still a machine most guys keep when they buy. The all metal is unreal for vlf and the disc is great too. Appreciate you watching
Great Vid, and test.... it’s always fun to compare machines. One request, can you put the Equinox in a single frequency to compare signals again. I’m just curious how well the Equinox does in your soil with a single frequency.👍👍👍 Single Frequency Vs. Single Frequency. Thanks for the test garden vid. Man... put more of these vids out... awesome content.👍👍👍
Thanks bro! I will im sure the Nox will perform better on the 11inch coin but with stock coil it wont hit that iron coin. Always cool to have one of my favorite channels watch!!
@@FindingAlabama Man this was fun to watch, because I’m a fanatic when it come to test vids. Awesome content man....it must be getting hot on your side. F75 drops bombs on every place I have hunted, so freaking awesome. Fisher really did a great job on the EMI issues with the newer machines. F75 that’s what I’m grabbing if we have an earthquake 😂😂😂
what settings on f75? you did not factory reset it. also how does the f75 do on other targets setup that way? is f75 only good for coins with that setup? if doing a test you should do same for both machines, factory both. no way to tell which is best without both being same starting setup. otherwise you need to tweak both to there best, which is not possible. some people are better then others.
First thank you much for watching. I factory reset Nox simply because guys would have a fit if i didnt. The F75 was set up like i set it in 90% of my hunting here in Alabama. These setting work great here. Comparison videos never please everyone. I appreciate that you would have liked factory reset on F75 but there was zero need. I factory reset the one that lost this match up so no one would holler. Both are good machines but in this test i could have stood on my head and nox still lost. Thanks again for watching.
I am a huge Fisher and Teknetics fan! They do make great detectors...I still have my Fisher CZ5 which is 30 years old!...Will never part with it....What does that say about Fisher? Unfortunately, I am concerned that Fisher and Teknetics may meet the same fate as Whites and Tesoro....Two brands which have been around for years, only to go under...We may have to admit that it seems as if Makro and Minelab have surpassed the First Texas and Garrett because of the multi-frequency technology..
Fortunately we are releasing just that later this year. But to be fair they have had multiple frq machines for years. And I have nox 800 collecting dust I find more in thick iron with f75 with one frequency. But the new stuff is in the works. Fisher Teknetics and Bounty Hunter are far from going down. Bounty hunter sells more detectors that all other companies on the planet combined. Annually. But yes its time for new machines and that's what they are working on. Appreciate you watching. 👍
F75 se beats a cheap.nox deeper those or made so cheap had to 800 bust coils rods cheap.minlab older were good not new cheap I beat the nuts off a box and the new 1400 madder lots deeper t2 is to
@johnp.2276 I definitely choose f75 over vanquish. Of course if you beach hunt a lot the vanquish would likely do best. I hunt coins and relics in heavy iron and modern trash. F75 is just better for that. I don't work fir FT but I am an ambassador for them. I'm also proud to swing a great American product. I appreciate you watching 👍🏻 🇺🇸
Fisher for me sexy pulled a confederate r supper clean with a 75se five other high end machine s missed trash iron nails it pulled it out my best find slickrick midway ga woooooooooo
I just bought a used F75 after Christmas. I have been using the Legend with good success....so I decided to take the F75 over areas that I have already gone over with the Legend. To my suprise I was pulling out all kinds of targets....most of them were deep...including 4 silvers. So I have to agree with your video. Thanks for sharing your comparison!
It's great to hear!
I have several multi frequency machines.
Like them a lot on the beach. But in an iron patch give me f75.
Appreciate you watching 💯🇺🇸
I've run my 75 for over 8 years and never once regretted my choice. of buying it. It is a very good all-rounder. Goodness knows how good the all new FT Single Frequency machine is going to be when it comes out. Awesome, no doubt.
What is the best coil ? F75 special edition
Neil coils smooth as silk deeeep
Ive had good success using the Fisher F 70. The machine is very light coil design is great. Battery life is really good to. Just another fine detecter in the fleet.
Good afternoon 👍excellent video I have been walking with Fisher F75 LTD for 3 years now and have never regretted buying a decent professional device. Basically, I walk with him through the field and forest, he sees small goals perfectly. Compared with XP Deus in depth and separation of goals, the result is the same, Fisher is not inferior in anything. Have a good search, my friend 🤝🔥⛏️
Yes sir I agree! Thank you much for stopping by !!👍👍👍..and thanks for the kind words.
Another great test for the 75 is iron above the height of a coin.2 plastic Chinese food containers side by side with square nails on top of each container, leave a couple inches between containers with dime on ground between containers. Set disc 18, FA speed,DP tone, sensitivity 95 .Listen for repeatable squeak. I use this setup around cellar holes with a lot of iron. F75 is very good, if signal isn't repeatable with 18 disc i move on,detector is very reliable about signals. I mostly use 5×10 oval dd coil.Would also like to see you try minelab in fast recovery 15hz close to fisher 13hz. Great video 👍
Thanks for the watch and the comments.
Another friend of mine wants me to try single on the Nox. It will hit the 11 inch dime in single but still struggles with that target in iron. Most guys buy the Nox for the multi frequency. Sure appreciate you stopping by. And i will get a video up before long with single freq on Nox.
You took the words out of my mouth. I'm with you on this one. I got rid of my Nox 800 because I did not like the tones. I just couldn't get use to the 800 and there's too many settings. I know a lot of people like that, but it can get to be too many. Went back to a single frequency T2 SE.
Thank you for watching.
One of the cats took a good look at you, thought to himself "yeah he's gonna piss some people off" and walked away. LOL
🤣🤣👍🏻👍🏻💯💯
Thanks, I have many detectors, decided why not another one, did a lot of research and videos, pulled the trigger on one today! Thanks again, great video.
Thank you for watching!
Awesome demo dude, I really enjoyed seeing the iron contaminated target difference!
Appreciate your support my friend!
The F75 is the first really good detector I ever had. It was great, I sent it off to Fisher to update to the LTD and it was never the same. One day I will get one that is an original LTD SE, not updated, and try it.
Thanks for wstching guys! Appreciate you stopping by!
Soil conditions also play a BIG part in depth and the "halo leaching" effect. I can tell the difference in my AT Pro just switching from the standard coil to the NEL Sniper coil. Definite depth advantage. Thanks for the demo FA! All the best brother!
Yes sir. Always cool to have stop in bro!!
Good video, brother. I do miss my t2 LTD once in a while. Nox tones do kinda suck but I’ve done well with it this time around. But, whenever I pick up the DEUS I forget about every other machine I’ve owned. There’s nothing like full tones on DEUS.
Hey bud yea i had ORX but i have a ton of great performance out of my t2 and f75. Its like trucks a guy just likes what he likes. The deus is a nice machine. Thanks for watching my friend!
The Deus full tones is amazing!!
@@PaystreakSuperfreak hey, Jeremy. Yep the DEUS with just ws5 and no controller is super immersive detecting. It’s also the best machine in iron I’ve ever used. Period. Talking dense square nail patches and big iron. I know you know!
I'm loving my F75 Ltd 😊
Your killing it with that 75 up there Lizz!!
Always been a fan of your channel. I appreciate your support!
The Nox is being used in multi freq because thats the sale point of this machine. It will hit the 11 inch dime harder in single freq 15kh. The iron masked coin still gives it trouble with similar results as multi.
Up to 3 times i had and tried the Equinox.. sold it 3 times on a row.
Still i feel the Equinox cannot be a bad detector , lots of people use it with lots of succes but it just was not for me .
It gave the best of signals even on a banana, so to be honest this vid actually surprised me a bit but fact stay clear that it is not a very reliable machine at some important points whereas lots of older machines , the original Minelabs gave such good tone and target ID ..
Liking the way the F75 works man 💪🏽
Back in the days lots of things where just better.
The T2 and F75 are amazing machines.
Thank you much for tuning in!
Wow the F75 is hitting the difficult target with ease, no question about it!
Great demo 👍Like they say seeing is believing 😀Thanks for sharing !!
Thank you for watching Cherry!! I appreciate your support!😉
No doubt about it, Fisher and Teknetics make some of the best detectors on the market!
Apprecuate you watching.
Great comparison video F75 is an awesome detector!!!
Thanks for watching! Yea its hands down my favorite it and t2. Appreciate your support bud!!
I posted a video around this time last year (2023) with a pretty cuff button as the thumbnail where I was using the F75’s cousin, the T2 and my buddy was using the Nox 800 and I dug a few pistol bullets and a nice cuff button. My buddy didn’t dig anything…. nothing. Not saying the T2 is better. I’m sure I just happened to walk over signals and he didn’t. But all these fellas run out and buy the next new thing lol. I’ll stick with my 9 year old T2 lol.
Top reviews in my eyes top job well done amazing work
Thank you much! Appreciate you watching.
Fishers are hard to beat, but some people don't want to hear it, I have one along with the
CZ-3D (Old Ser Number) along with the CZ-21
3D is magic on nickels and bronze coins, just a little heavy with a bigger coil.
Have a Madicore on the way, I will check it out
Thanks for the test , nice to review it again
so tired of a certain 3 company's :))
This is the year. We have new machines otw. For now I am with you, they are hard to beat. Thank you much for watwatching 👍🏻🇺🇸💥
love it brother .. I hunt with a guy with the nox 800 .. it's a good machine, but he's not outhunting me, not by a long stretch...he keeps coming up with the "you're hunting with old tech" .. I keep telling him to prove his 'new tech' is better .. he hasn't.
Agreed 100%. I used 800 for 6 months every hunt. It shines at the beach. But inland f75 t2 are my go to picks.
Thanks much for stopping by and always supporting the channel my friend!
Já se rendeu a nova tecnologia?😅
I remember having the same experience with a friend who had a shiny new Whites Spectrum, and I using my old Bandido. He stopped hunting with me. 😅 he actually laughed at my old Tesoro. Not for long.....
in all honesty, comparing detectors should be done with the same size and geometry coils. The coils are, after all, user changeable.
At the time of this video there was no similar coil for minelab machines. This was a stock coil test at the time. Thanks for watching 👍
Fisher is really good at separation, love my CZ-3D, but coils are heavy
For sure👍🇺🇸 thanks for watching
I run the Fisher F70, and the old trusty Bounty Hunter tracker IV. The Tracker isn't fancy but seems stronger with deep signals. Could just be the ground I hunt. Great video.
Thank you for watching 👍
I like the F70 a lot. Tracker is a dang good unit too. Thanks for stopping by.
I am sold on f75.. thanks for sharing..
Me too my friend. Thank you for watching 👍
@@FindingAlabama and may i ask why?
Absolutely.
I hunt mostly dense iron sites. And I spent a great deal of time on other machines and simply get the best performance in my area with F75ltd in iron. No hype no joke no marketing just get more non ferrous targets out of the ground with it. Appreciate you watching and commenting 👍 👍🇺🇸
great video. Thanks. I've really heard some great stuff about F75. I hope the stories are true about its depth capabilities cus I'm probably gonna buy one. I see it squeaked on the 11 inch dime. How deep do you think it hits on a quarter??
Hello Bob.
The depth in my soil on a quarter is 12 inches with stock coil. It's still my favorite machine. Thank you for watching 👍
❤ my f75se
Thank you for watching 💯
I wouldn't trade 5 nox's for 1 F75 or T2! ( well maybe! But I'd sell em & Buy a T2 or F75 & have a boat load of $$$ left!!)
Amen 👍
The Nox is good and deeper in GOLD MODE ...only in Gold mode
F75 is the Best!💪👍👍👍
👍👍👍
field 1 /reactivity 2/sensitivity as far up as it will go i do good 👍
with the nox 600
Great comparison video.
Thanks bro! Appreciate your support.
Well this should be good. 🤓👍🏼. Before ground balancing use the pinpoint function to find clean ground big difference
The truth is it just didnt out perform the f75 .. I made the video long on the Nox part just to show i was doing all i could for guys that think i would ground balance on a metal object. It was a fair match up. Both machines were ground balanced in the same spot, properly ground balanced. This aint my first rodeo slick🤓👍
Awesome video my friend 👍.
Thank you much appreciate you watching!
75se deeper nox when behind my friend with SE 75 got what nox missed and a Deus to t2 is deep try a 12/13 nel coil it's allsome
I just pulled the trigger on the t2 I was curious to see if it can out perform my tx850 delta and gamma machine can't
Thank you much for stopping by.
T2 is still a machine most guys keep when they buy. The all metal is unreal for vlf and the disc is great too. Appreciate you watching
F75 - field Nox - Beach/Water
Thank you for watching 👍👍
Wow .. Great comparison.. you have hot Soil where you live..?
It varies but my yard is fairly sparky. Runs 2 or 3 bars in my yard. Thank you for watching Dan!
Just saw video, 11" silver dime NOX not my choice 😢 F75 winner 4 sure😊
Thank you much for watching 👍🏻
Im pulling Indians At 12 + inches with my T2
Hello my friend. Yes sir that T2 is a deep machine. Thanks for stopping by💯
Never scrap the ground
Great Vid, and test.... it’s always fun to compare machines. One request, can you put the Equinox in a single frequency to compare signals again. I’m just curious how well the Equinox does in your soil with a single frequency.👍👍👍
Single Frequency Vs. Single Frequency. Thanks for the test garden vid. Man... put more of these vids out... awesome content.👍👍👍
Thanks bro! I will im sure the Nox will perform better on the 11inch coin but with stock coil it wont hit that iron coin.
Always cool to have one of my favorite channels watch!!
@@FindingAlabama Man this was fun to watch, because I’m a fanatic when it come to test vids. Awesome content man....it must be getting hot on your side. F75 drops bombs on every place I have hunted, so freaking awesome. Fisher really did a great job on the EMI issues with the newer machines. F75 that’s what I’m grabbing if we have an earthquake 😂😂😂
😂Yes sir. Ill definitely get that rematch single vs single soon bro!
what settings on f75? you did not factory reset it. also how does the f75 do on other targets setup that way? is f75 only good for coins with that setup? if doing a test you should do same for both machines, factory both. no way to tell which is best without both being same starting setup. otherwise you need to tweak both to there best, which is not possible. some people are better then others.
First thank you much for watching.
I factory reset Nox simply because guys would have a fit if i didnt. The F75 was set up like i set it in 90% of my hunting here in Alabama. These setting work great here. Comparison videos never please everyone. I appreciate that you would have liked factory reset on F75 but there was zero need. I factory reset the one that lost this match up so no one would holler. Both are good machines but in this test i could have stood on my head and nox still lost. Thanks again for watching.
Support for you my friend
Thank you much! Appreciate you watching.
I am a huge Fisher and Teknetics fan! They do make great detectors...I still have my Fisher CZ5 which is 30 years old!...Will never part with it....What does that say about Fisher? Unfortunately, I am concerned that Fisher and Teknetics may meet the same fate as Whites and Tesoro....Two brands which have been around for years, only to go under...We may have to admit that it seems as if Makro and Minelab have surpassed the First Texas and Garrett because of the multi-frequency technology..
Fortunately we are releasing just that later this year. But to be fair they have had multiple frq machines for years.
And I have nox 800 collecting dust I find more in thick iron with f75 with one frequency. But the new stuff is in the works. Fisher Teknetics and Bounty Hunter are far from going down. Bounty hunter sells more detectors that all other companies on the planet combined. Annually. But yes its time for new machines and that's what they are working on. Appreciate you watching. 👍
I sure miss Whites! 45 years swingin one. 5 diff. machines & not ONE repair needed! THAT'S quality!!
F75 se beats a cheap.nox deeper those or made so cheap had to 800 bust coils rods cheap.minlab older were good not new cheap I beat the nuts off a box and the new 1400 madder lots deeper t2 is to
Multi frequency lot of hype i won't did that target
Multi is great on the beach. But in my soil and heavy iron give me F75👍🏻🇺🇸😎
Thank you much for watching.
@@FindingAlabama
So should I buy the f75 ltd over the vanquish 540
@johnp.2276 I definitely choose f75 over vanquish. Of course if you beach hunt a lot the vanquish would likely do best. I hunt coins and relics in heavy iron and modern trash. F75 is just better for that. I don't work fir FT but I am an ambassador for them. I'm also proud to swing a great American product. I appreciate you watching 👍🏻 🇺🇸
@@FindingAlabama ok
Is there a way I could talk to you about it
@johnp.2276 mannjeremi@gmail.com
Might be tomorrow before I can get back to you were in the woods detecting today👍🏻
Nice , muito bom parabéns 👏👏👏
Thank you for watching!!😎
:D
Whites MXT Pro is better
Fisher for me sexy pulled a confederate r supper clean with a 75se five other high end machine s missed trash iron nails it pulled it out my best find slickrick midway ga woooooooooo