I’ve had one of these and used it everyday for dust extraction, I’m a carpenter so sucking up the dust is important and I have to say this still sucks as good as it did when I got it new. As long as you clean the bag well and make sure to put it back on correctly then you will never have a problem absolutely brilliant hoover. Often leave it running for well over 4/5hrs at a time and doesn’t over heat and still has amazing suction. Cannot moan for the price and with Screwfix returns policy really nothing beats this hoover.
Ok so I bought one and it is well worth the 40 quid. It would suck the number off a pool ball as a dry vac. Very strong suction and fairly loud but not ear-splitting. It can be used without a bag ( 1 supplied ) but the dry filter ( 1 supplied) MUST be fitted (or all the dirt will clog the motor) and will quickly get very dirty but does work well with no bag. What should be in the bag just ends up in the drum and needs wiped out by hand to clean properly. As a wet vac it will suck up anything that will fit into the hose within reason ,again, make sure the sponge filter supplied is fitted . Connect the hose to the black port and it now is a VERY powerful blower. The utensils are not heavy duty but capable and should be fine unless abused. Would I buy another? YES.
I've just ordered the same model,my friend has one and i found it brilliant for hoovering and the price £39.99 is brilliant to,,great review thanks for the upload 👍
Hello, I have the same one, there is an idea to leave the cable tied up, it has a velcro tape, you fold the cable and tie it with the velcro to the upper handle of the vacuum cleaner, greetings.
from my experience it fells like there should be rubber seal between the lid and the bucket (looking at those grooves) , i thought my version is missing it , but looking at yours I can see that yours is just the same. The lid clips on a side are a bit loose. If you add rubber seal ( f.e. the ones for door/window drafts) the seal between the lid and bucket will be tighter and the clips will be tight as well
I thought exactly the same and felt a rubber gasket should have been supplied. I fitted my own self adhesive seal as I needed it working asap and it did work as a wet vac a whole lot better, these Titans were definitely designed to have a gasket and mines going back, typical Chinese rubbish.
I just bought this to use on my titan mitre saw and workshop in general but it doesn’t fit on the mitre saw or any other titan power tools which is annoying 😩
I have one question: I just bought this vacuum and it works pretty well. But on the Screwfix website it said "can be used with OR WITHOUT bags". So, can it REALLY be used without a bag and just collecting the dust in the "bucket" part?
what's the purpose of the whole at the back tho.... I've got one but it feels to me that something needs to be attached on the hole at the back coz it just blow empty air that smells like wires when in use
The vaccum cleaner sucks through one hole and blows out from the other. This vaccum cleaner can be used both as a blower and vacuum depending on which side you attach the hose to. It was explained early on in the video.
I’ve had one of these and used it everyday for dust extraction, I’m a carpenter so sucking up the dust is important and I have to say this still sucks as good as it did when I got it new. As long as you clean the bag well and make sure to put it back on correctly then you will never have a problem absolutely brilliant hoover. Often leave it running for well over 4/5hrs at a time and doesn’t over heat and still has amazing suction. Cannot moan for the price and with Screwfix returns policy really nothing beats this hoover.
Ok so I bought one and it is well worth the 40 quid. It would suck the number off a pool ball as a dry vac. Very strong suction and fairly loud but not ear-splitting. It can be used without a bag ( 1 supplied ) but the dry filter ( 1 supplied) MUST be fitted (or all the dirt will clog the motor) and will quickly get very dirty but does work well with no bag. What should be in the bag just ends up in the drum and needs wiped out by hand to clean properly. As a wet vac it will suck up anything that will fit into the hose within reason ,again, make sure the sponge filter supplied is fitted . Connect the hose to the black port and it now is a VERY powerful blower. The utensils are not heavy duty but capable and should be fine unless abused. Would I buy another? YES.
When i use without bag i get stuff blowing out the back!
I've just ordered the same model,my friend has one and i found it brilliant for hoovering and the price £39.99 is brilliant to,,great review thanks for the upload 👍
Hello, I have the same one, there is an idea to leave the cable tied up, it has a velcro tape, you fold the cable and tie it with the velcro to the upper handle of the vacuum cleaner, greetings.
I bought two. Really powerful. Much better than the cordless. Really light.
very good video, very well presented. appreciate your efforts. NB today is September 2023, and it has become £49.99.
from my experience it fells like there should be rubber seal between the lid and the bucket (looking at those grooves) , i thought my version is missing it , but looking at yours I can see that yours is just the same. The lid clips on a side are a bit loose. If you add rubber seal ( f.e. the ones for door/window drafts) the seal between the lid and bucket will be tighter and the clips will be tight as well
I thought exactly the same and felt a rubber gasket should have been supplied. I fitted my own self adhesive seal as I needed it working asap and it did work as a wet vac a whole lot better, these Titans were definitely designed to have a gasket and mines going back, typical Chinese rubbish.
Didnt review the wet side of it.
Its not realky a vacuum cleaner its more wet pick up shop use.
Why is no one reviewing the wet function
You need to buy a wet vac attachment to use the wet function properly
Do you have to block the "air out "hole whilst vacuuming so dust doesn't go all over the place
I bought this for a dirty job so I wouldn't wreck my main vac. I was blown away, pun intended by the titan. Havent used it for wet purposes yet
have you used for DIY cleaning at all. I'm considering buying this for a cheap dust extraction system.
I just bought this to use on my titan mitre saw and workshop in general but it doesn’t fit on the mitre saw or any other titan power tools which is annoying 😩
I have one question: I just bought this vacuum and it works pretty well. But on the Screwfix website it said "can be used with OR WITHOUT bags". So, can it REALLY be used without a bag and just collecting the dust in the "bucket" part?
Do you use it on the carpet
Yes you can use it bagless
How big is it? On the website it says it's 21cm diameter but it looks much bigger than that. many thanks.
Useful thanks
Is this not also a wet vac?
I need a vac for my wood shop to work with cyclone collector, would it be good by you?
Is there a seal between the main bucket and the motor section? Looks like there isn't one?
No there isn’t but it should have one, they don’t come with them, took mine back because of this part missing.
what's the purpose of the whole at the back tho.... I've got one but it feels to me that something needs to be attached on the hole at the back coz it just blow empty air that smells like wires when in use
The vaccum cleaner sucks through one hole and blows out from the other. This vaccum cleaner can be used both as a blower and vacuum depending on which side you attach the hose to. It was explained early on in the video.
If you watched the video you'd fucking know.
@@stuontwo677 😂
@@Macm73 the era of smartphones replacing common sense
You forgot to test wet and dry 😂
Anyone got a link on how to fit the 15m universal hose on this
For 40 pounds it's a bargain 🤗
you can take the brush off
very good, at least cleaned all cocain