Razor Sharp! Sharpen Drill Bit In 2 Minutes With This Method
Vložit
- čas přidán 7. 09. 2024
- Hello everyone! You are watching video "Razor Sharp! Sharpen Drill Bit In 2 Minutes With This Method"
Quick and effective drill bit sharpening guide in 2 minutes. Discover tips and techniques to keep your drill bits sharp, saving time and effort. Ensure your tools always perform at their best!
#diyprojects #tipsandtricks #diy #drillbit #sharpendrillbit #sharpendrillbithacks
I hope you enjoy watching my video!
On Alva Welding Channel, we share: Welding, welding tips and tricks, welding fabrication and techniques, How to weld, DIY, life hacks, weld.com...
Alva Welding is a channel that discusses welding, how to weld thin metals, how to weld square pipes, how to weld round pipes and synthesize good and correct welding techniques. The channel is suitable for everyone, especially beginners.
I hope this channel is helpful and don't forget to subscribe!!
► Subscribe to Alva Welding channel: http:
© Copyright by Alva Welding☞ Do not Reup
![6 Practical Drill bit Sharpening Hacks !!! [Subtitle]](http://i.ytimg.com/vi/dpPmYYexQJ8/mqdefault.jpg)
This video is really great! The method they recommend for sharpening a cutter takes just 2 minutes and is very easy to do. The instructions in the video are very detailed and easy to understand, allowing viewers to quickly apply them in practice. This helps increase the life of the drill bit and save costs for users. Overall, this is a useful video with quality content
Thanks for sharing!
A very good idea
"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things!
"
the cutting edge on the drill bit has no negative rake angle( clearance).needs backed off,this will extend the life of the cutting edge of the drill bit.
Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!
HOLA EXCELENTE EL VIDEOS 👍
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Aprovado, com certeza.
Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!
😂😂😂 Akkor van jól megél3zve ha spirális forgácsot csinál a fúró. Hátrafelé kell lejteni az élánek. Drill doctor!😘👌
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Muchas gracias por enseñarme,a afilar mis brocas, saludos desde Tuluá Colombia.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Great video. Love the backing music track; what's it called?
Hello. I use the song of the day for my video: Let's Do This!
Cum se poate ascuti un burghiu, mai scurt și mai subțire?
Exemplu: diametru de 3mm și o lungime de4cm?
Multumesc
Hello, you can use this tool to sharpen your drill bit. Each drill bit I grind has a diameter of 6mm
Est-ce une impression, mais quand on regarde à 5:22 minutes, on voit que le forêt n'a pas de dépouille, il doit talonner.
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Did you not put the drawing of the line on the wrong side in the video?
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
Wrong sharpening angles, the margin is higher than the cutting edge
Welcome to my channel! Thanks for your comment. I'll improve next time. Wish you have a nice day
It appears that your jig has given the drill negative rake - yes it drills but not well - there are many of the following jigs for a standard bench grinder available czcams.com/video/wv8UNpTkFJQ/video.html Try one they are cheap, plentiful and work well - the offset on the pivot gives the drill the required rake. IMHO drills 1/4" and up are easy to grind by hand - there are plenty of videos on doing this. In the field (if stuck) I will use what ever grinder etc. is available to touch up a drill. Manual hand grinding a drill is a skill worth learning.
Welcome to my channel! Thank you so much for your comment! I will think about the improvement idea. have a nice day!
Привіт я з України. Для чого два диски? І ще : болт можна втопити в кутник і не буде заважати.
Hello. Thank you for your feedback. It is better to use 2 discs because when grinding the drill bit against 1 disc it will vibrate or break. If you can find countersunk bolts, that would be great
Маленькие Незаточиш
Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best
POUR etre sapé en plein commentaires, pas la peine ,pourla video du banc de coupe , pas de procédé 111, 135 c'est mieux mais bon...
Et l affûtage loin d être pro dsl
Il faut de tous por faire un monde....amuse toi bien,
Surtout ne faite pas sa sécurité avant tout....
Me suis faitun copain 😅
Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!
L
Welcome to Alva Welding channel! Hope you have a good time while watching the video
👍👏🇷🇺
"☘☘☘😘😘😘💕💕💕
"
Good day! Excuse me, how can I contact you via email?
Hello. You can contact us via this general email: Vuthao.2010.28@gmail.com
@@Alvawelding20 Hi! I contacted you, please kindly check the email
Must have had another drill bit that was sharp, so you could build that jig for sharpening drill bits….
I believe I could make that and I don’t have a vice to hold the side grinder. 👍🏻🇺🇸👏🫶🏻it 8/8/24
Hello. We did the grinding and drilling with the same drill bit. If you have a better grinding method, please share with us. We are happy to learn from you