Sync 3 A/C Status Indicator Fix!
Vložit
- čas přidán 10. 01. 2022
- Does your car have that annoying issue of the A/C status indicator in Sync 3 being out of Sync with the physical HVAC panel on your center stack?
Watch as we fix this on a Ford C-MAX Energi Hybrid! This process is valid for all C1MCA vehicles, namely the Focus, C-MAX, and Escape/Kuga. For a full list of Second Gen C1MCA (commonly known as C-Platform) vehicles, please check out this wiki article: en.wikipedia.org/wiki/Ford_Gl...
Please keep in mind that you will need to jailbreak your unit first, and your unit will need to be on Sync 3.4 Build 21194 for this process to work correctly.
If you have any questions please feel free to drop em below! If you need anything for your Sync 3 upgrades, please go to naviupgrade.com/shop
Thanks for watching! - Auta a dopravní prostředky
Adding navigation to our 2014 edge sync 2 we lost ac and heated seat controls is there a fix for this as well?
Hi there, I have a question different form this video. Is it possible to enable by forscan the Performance Gauge menu on the European Puma? It is available stock on the Puma ST, it would be good to have it on the non st Pumas as well. Thanx!
Hi, I have 2020 Fiesta and want to enable "Climate" section in my Sync 3.4. Are you planning to make video about it?
I heard that there is a problem with presence of DUAL button after activating this panel. Fiesta doesn't even have this button physicaly - it's single-zone air conditioning. I would really appreciate
I would really appreciate if you could get this working and get rid of DUAL button! You make very nice videos :)
The other 2 folders (00customerbackgrounds & mods) that were already on the USB drive, are those necessary for the system to read the "LED Fix" files ?
Hello, do you hacve a link to download the mod? Please..
Is jailbreak the only solution to fix this? I have activated climate control in forscan and everything is working fine but not the AC button. I got the same problem as in the video.
Hi Brian,
Thanks so much for all your content. I recently swapped out a sync 2 for a sync 3 in my Ford Kuga (escape). I’m looking at fixing this a/c indicator after doing the Fmod Jailbreak however i have a more pressing issue. As I am right hand drive the temperature display is reversed - passenger for driver and vice versa. After lots of research it looks like it can’t be a simple fix through FORscan. I have however found a thread on Fmod where someone has made some QML files the apparently fixes it. Have you tried this before?
Hi I haven't as I am in the states where our wheel is on the correct side 😜 but if people say it works then I'd say it's worth a shot
morning, i have a fiesta 2018, without maps and climate control, i am inexperiente but i will make a question "can i put a maps and climate control on my sync" The model of fiesta here in Brasil is a SEL I think the US and European models are given different names than here. , my sync 3.3 19052
You cannot add maps to a module that does not have maps on it. I will make a video on how to enable HVAC on FORScan soon. Thanks for watching!
Will this fix the “Dual” button as well? I converted my 2012 Explorer to Sync 3 and the same thing happens on my climate buttons.
So a lot of people get the dual function wrong in how it works - when enabled, dual means each side can be controlled individually, either on the screen or the control panel. Pushing the button off of "Dual" mode will cause both sides to go up and down together. Rotating the passenger dial will switch it back to dual mode automatically. From what I've experienced the only way to sync both back up is by selecting "auto" on either the control panel or display. Is this how yours is functioning? If so, then this is normal Ford Sync and HVAC module behaviors.
From what I understood it was only an issue on C1MCA but I guess it is on more vehicles than that if what you're saying is correct!
@@NaviUpgrade cool! Trying this!
I have a 2013 Ford Edge that I updated to sync3.4 19200 that has an out of sync issue with the Dual zone HVAC buttons. All other functions are normal. Any suggestions on how to fix this problem?
We have a video on how to fix this on our channel 🙂 lookup HVAC Fix!
@@NaviUpgrade I saw your video but it indicated that I need sync3.4 21194. Can I safely update to that version then do this mod or can I do it with the current 19200?
@@TheKYbubba you'll need to update for the mod to work properly.
I did the update and loaded the patch but the Dual climate button is still not working. Did I miss a step?