Pioneer SX 780 upgrade to the STK 0050 module II. Is it worth it?

Sdílet
Vložit
  • čas přidán 27. 10. 2023
  • This pioneer sx780 is being upgraded to the new STK 0050 module II , is it worth it? I will be comparing with the original Darlington STK's before and after with the new STK 0050 module II, more power? better sound??
    watch my video and find out ....
  • Jak na to + styl

Komentáře • 52

  • @Craig_Spurlock
    @Craig_Spurlock Před 8 měsíci +5

    A buddy bought a very clean SX-780 on Ebay, and it had a defective STK0050 that had already been changed once. I convinced him we should go with the discreet modules, and once I got them installed, they worked perfectly. After adjustments, I measured about 52 clean watts per channel into 8 ohms. The modules sound great too!

  • @mistermac56
    @mistermac56 Před 8 měsíci +4

    Nice work on a great receiver. The new discrete modules are a godsend as a replacement for the STK 0050 Darlington modules. They are reasonably priced and the build quality of them is excellent.

  • @kennethiman2691
    @kennethiman2691 Před 8 měsíci +4

    If he wants a forever receiver, I would have done a total recap. They are decades over their lifespan.
    Love those STK replacements.

    • @VintageAudioFever
      @VintageAudioFever  Před 8 měsíci +2

      Hey Kenneth
      Capacitors statement is fair enough!! he will have no issues with those caps on this unit for many years to come but again, it's what the owner wanted....I totally respect that!!

    • @bulgoczacybulgotnik
      @bulgoczacybulgotnik Před 2 měsíci

      Also put bigger caps in power supply 10000 to 15000uF would B fine

    • @danielknepper6884
      @danielknepper6884 Před měsícem +1

      Yeah until you blow your bridge rectifier​@@bulgoczacybulgotnik

  • @Cass48
    @Cass48 Před 5 měsíci +3

    I just had this done to my 780. It sounds great.

  • @craigm.9070
    @craigm.9070 Před 8 měsíci +3

    Excellent work! I've seen several of these STK transplant kits installed now; they seem very well made, durable, and serviceable. Another great, classic receiver prepped for a long run, your customer is most certainly happy with the results. Thank you for your time

  • @g.fortin3228
    @g.fortin3228 Před 8 měsíci +1

    Nice job Joe !! If i find one of these ailing but clean,and can pick it up cheap, it's nice to know this is a worthy repair.

  • @Ezzell_
    @Ezzell_ Před 8 měsíci +2

    Great video. I would like to see a video on your light bulb load box. Could you do a video on it?

  • @elsaarmstrong-zp6ng
    @elsaarmstrong-zp6ng Před 8 měsíci

    Best audio amp I have ever heard was a pair of Leak TL50 tube amps. Fronted by point plus stereo pre amps. KT88 tubes/valves give soft clipping on even harmonics distortion. Gives out presence like a live music event! Of course you need decent sized speakers like Tannoy Westminster’s which can shift air! Many guitar players like even harmonics distortion i.e. Fender , Gibsons etc!

  • @deweydodo6691
    @deweydodo6691 Před 4 měsíci

    Now I miss my lights on the front face. Think I am down to one bulb on the right side . I bought my sx780 new and its never been serviced. It plays reasonably well yet.

  • @TurntableGuy
    @TurntableGuy Před 8 měsíci

    Good job. The aftermarket STK0050s are actually not bad and seem to work well without blowing up, but it's nice to have an alternative.

    • @marka1986
      @marka1986 Před 5 měsíci

      The quality is variable. I did a repair and went through 4 of them in 6 months. Ordered some more from a different place and no problem since.

    • @acoustic61
      @acoustic61 Před 4 měsíci +2

      @@marka1986 Where did you get the good ones?

  • @alexzildjian
    @alexzildjian Před 8 měsíci

    YOUR NEW SUSCRIBER 😃 love vintage gear Hi from Baja California MÉXICO 🇲🇽😊

  • @Fanan67
    @Fanan67 Před 8 měsíci +1

    Hi, very nice work. One suggestion. Make a lock for your spinning base. She spins very easy witch is good, but when you are making measures or soldering it should be lock and steady. Because if loose you can make a short or a bad join. Thank you for your videos.

    • @VintageAudioFever
      @VintageAudioFever  Před 8 měsíci +1

      hey!!! yes I agree it does get away from me sometimes, I unusually wedge something to stop the spinning when I need to, other than that, I find this table very useful, especially when I am all set it for testing the unit, I can access the front/back but rotating the table without disturbing any of my probs....

    • @Fanan67
      @Fanan67 Před 8 měsíci

      @@VintageAudioFever I have one also, they are a must have. I lock mine when I need to, because I already had the probe hitting a wrong place and got sparks and smoke.

  • @John-N-541-ym7dx
    @John-N-541-ym7dx Před 8 měsíci

    Have a SX 780 that eventually will need the STK transplant done, but not until my SX 980 goes down and cannot be brought back to life.

  • @fedinkov
    @fedinkov Před 25 dny

    🤘

  • @bonno666
    @bonno666 Před 8 měsíci

    I had an Akai PA-W04 amp with similar STK 0050-II, and the paint came off too. It could have been that way from factory.
    Would these STK replacements work for a STK0070-II. So with the suffix II behind the number. He is selling them without the type 2 suffix

    • @VintageAudioFever
      @VintageAudioFever  Před 8 měsíci +2

      I beleive that these STK modules are for several models, I know the seller will answer better on your question than I could and he does responds to questions...

  • @RalphRacc00N
    @RalphRacc00N Před 8 měsíci +2

    I believe those are original power packs, The paint falling off is most likely age. Now if someone would remake the FM integrated circuits.

    • @VintageAudioFever
      @VintageAudioFever  Před 8 měsíci

      Hi Ralph...the reason I say they may not be original STK is simply the paint rubbing off.. I was suppose to compare with one that I believe is original but I miss to show it on this video, regardless if they were or not, the customer find them working nicely on this receiver before changing them to the new modules...

    • @videocast3655
      @videocast3655 Před 4 měsíci

      @@VintageAudioFever I am a one owner of a 780 and replaced the original packs on it several years ago. They are clearly marked Sanyo on the face. all the replacements I bought just say darlington or whatever on them. I guess there may be some knock offs out there with sanyo on them, but I doubt if they are real this far down the road

  • @DaveofAllTrades75
    @DaveofAllTrades75 Před 9 dny +1

    Hey joe could you provide a link or name of seller you got the discrete replacements from? I have found some on various places on eBay but they’re the ones you have to build yourself and I would rather get a set that are already made and done professionally like the ones in your video for my pioneer 780. If you could let me know I would appreciate it

    • @VintageAudioFever
      @VintageAudioFever  Před 9 dny +1

      my buddy Tim is the guy that bought those STK modules from ebay, I think. I will make sure he see's your comment and hopefully he will get back to you with your question.

    • @darylsans
      @darylsans Před 4 dny

      @@VintageAudioFever I am interested in the modules as well.

  • @danielknepper6884
    @danielknepper6884 Před 2 měsíci

    STK sound pretty good for the most part, but I will take discreet output devices over these everyday.

  • @Luke-12V
    @Luke-12V Před 5 měsíci

    good evening, I really like watching your videos, I really appreciate it, could you please tell me how to easily calculate the power of the amplifier According to RMS, as you showed in the video, 21rms is equal to 51 watts, or something like that, thank you very much for any explanation, All the best

    • @VintageAudioFever
      @VintageAudioFever  Před 5 měsíci +1

      Hi Luke...thank you for watching my videos.
      The watts per channel are measured RMS X RMS and you decide that number by the ohm you used...so let's say 21 rms would be...
      21x21 / ohm resistance...

    • @Luke-12V
      @Luke-12V Před 5 měsíci

      @@VintageAudioFever thank you very much

  • @brunY741
    @brunY741 Před 2 měsíci

    Hi. Any video on the LX-690 Pioneer?. Mine lights up but no click/relay. I changed the stk0039 with no result. Humm....

    • @VintageAudioFever
      @VintageAudioFever  Před 2 měsíci

      affraid not a audio ive worked on as of yet....
      why did you change the STK's we're they short? and your saying it didn't correct it'self after you change STK?

    • @brunY741
      @brunY741 Před 2 měsíci

      @@VintageAudioFever hi. Thanks for coming back. No I tried to change the stk because I had a couple of it. With poor diagnose method! Shame on me.

  • @billpeirce7
    @billpeirce7 Před 7 měsíci

    Where can I buy these modules?

    • @VintageAudioFever
      @VintageAudioFever  Před 7 měsíci

      @VintageAudioFever
      • 0 seconds ago
      the customer bought them on ebay , type in STK-0050 module II

  • @markmurray5619
    @markmurray5619 Před 8 měsíci

    The new STK modules look just like the modules xraytonyb designed.

    • @VintageAudioFever
      @VintageAudioFever  Před 7 měsíci

      I seen xraytonyb video on these STK, I didn't know he designed them, I thought he had bought the disassembled kit and he put it all together...I could be wrong tho...
      xraytony is a great channel for sure!!

    • @videocast3655
      @videocast3655 Před 7 měsíci

      correct. xraytonyb credits the designer in his video@@VintageAudioFever

  • @AN-ce1nd
    @AN-ce1nd Před 8 měsíci

    I had one brand new in 1980. I also had a Marantz 2216B. Guess which one I kept? The Marantz, pioneer is absolutely pure junk.