Now get another 1 and cu that front out and but a double.baffle over the front part then cut your sub holes out of that new faceplate, mount your subs and hammer them babies. I think 2 would be more efficient in that size of box. I know they need big box for proper air displacement but 2 would b perfect in that box and it would hit so hard it would hurt lol
Bro you got some Home work to do! Don’t take it wrong and I know ain’t my money being play with, but just learn a little more to get the most out of it . Good luck 👍
Personally I turn that bass boost shit off on my stuff. It pushes out that one frequency more than the rest. If it ain't pushing it right the amps too small. Don't compensate with boost. But it's just my opinion. I'm an old head, we learn as we go. I also like to have an amp big enough to push the subs max with the amps RMS and just run the gain lower. Nice sub though bro, and yeah the cardboard will leak but I see you know that already. I'd use caulk because the texture of the rhino liner and let it set up 24hrs after I put the panel on, should work great though.
@@sbfdman all good bud. Stuff like this just consider what applies and leave the rest. But bass boost definitely only pushes the frequency you set it too more than the rest. It isn't boost across the frequency range so in my opinion it's not good to use, most sub manufacturers recommend you dont use it also. Good luck 👍
I'm aware that the bass boost should be off please also realize that this was a test demo!
Turn the bass boost off, your just gonna increase the distortion
Now get another 1 and cu that front out and but a double.baffle over the front part then cut your sub holes out of that new faceplate, mount your subs and hammer them babies. I think 2 would be more efficient in that size of box. I know they need big box for proper air displacement but 2 would b perfect in that box and it would hit so hard it would hurt lol
Nemesis recommends 1-1.5 cubic ft per sub so this box may be a lil small for 2 but I'll keep that in mind
Bro you got some Home work to do! Don’t take it wrong and I know ain’t my money being play with, but just learn a little more to get the most out of it . Good luck 👍
Bro what was that box originally for? I just got two of these eights And I want to quickly throw him in something before I get a custom box built
For a 10
Cardboard is gonna leak through the lines better to use weather strip or the fabric from another box
Yea it's just a quick thing to test the amp..prolly gonna build a custom box for it soon
Personally I turn that bass boost shit off on my stuff. It pushes out that one frequency more than the rest. If it ain't pushing it right the amps too small. Don't compensate with boost. But it's just my opinion. I'm an old head, we learn as we go. I also like to have an amp big enough to push the subs max with the amps RMS and just run the gain lower. Nice sub though bro, and yeah the cardboard will leak but I see you know that already. I'd use caulk because the texture of the rhino liner and let it set up 24hrs after I put the panel on, should work great though.
@TecniclyAwsm it's too much amp for the one sub plus I haven't adjusted it n the box isn't to spec. But ima do a sub box build vid a lil later
@@sbfdman all good bud. Stuff like this just consider what applies and leave the rest. But bass boost definitely only pushes the frequency you set it too more than the rest. It isn't boost across the frequency range so in my opinion it's not good to use, most sub manufacturers recommend you dont use it also. Good luck 👍
Can u use nail glue???
@smok3ater
Where you located at boss I can build you a box that would really wake that sub up not damage it with that box you have it in now
Tyvm..but I'm not sure if I'm even going to keep the car
Bro wtf u dont even know what are you doing omg