PULSAR NS 200 SPROCKET IN MY TVS APACHE RTR 200 MORE TOP SPEED CHAIN SPROCKET CALCULATION
Vložit
- čas přidán 30. 01. 2020
- Can we install 14T sprocket from Bajaj Pulsar NS 200 in TVS Apache RTR 200 for more top speed? How to install chain sprocket for better top speed? Modification to improve performance with altering sprocket teeth? Chain sprocket calculation for final drive ratio.
TVS Apache RTR 200 gets 13T sprocket front sprocket and 45T rear sprocket with chain drive. A small change in number of sprocket teeth can be made to improve the acceleration or to reduce the cruising RPM. Bajaj Pulsar NS 200 uses a 14T front sprocket which should result in better cruising speed in the Apache RTR 200. Both the chain sprocket in Pulsar NS 200 and Apache RTR 200 uses same pitch so they can be interchanged but when I tried to replace the front 13T sprocket on the Apache RTR 200 with 14T sprocket of Pulsar NS 200 and I faced some serious issues which is shown in this video. This video also explains the calculation with sprockets and how changing the number of sprocket teeths effect the top speed and acceleration.
TOOL KIT USED:
Socket Set 1: amzn.to/2PzQ9Qt
Socket Set 2: amzn.to/2P0Grpd
Wurth cleaner: amzn.to/2vxv9Em
Instagram: / the_sportztourer - Auta a dopravní prostředky
This channel is like MC Garage of India.
Keep up the good work bro.....
👍 Like from an RTR 200 owner
@Mohammed Suhail Couldn't agree with you more.
Keep up the good work bro. You will definitely get more subscribers.
True.
True...
Absolutely right. Very useful videos👌👌👌❤️
As it's said the Journey is most important than the destination.
Your failed efforts are learning for your followers and is an important fact for all the you tubers like you.
I always appreciate the fact that you never hide your failures but are always happy to share it with you followers.
Cheers and Best luck for your next project.
He is one step away from success..need to change chain with cbr chain..and work will be done
So Finally someone came out with gearing ratio.🤟🤟
Love the way u explain each aspect of the information in every video
Hi, i changed my RTR160 4v front sprocket from 13 teeth to 14 teeth. The 14 teeth sprocket was a spare part of RTR180. In my case i had lot of gap and clearance to fit that, because RTR160 4v don't have that metal curvy plate and have smaller 13 teeth sprocket. I compared RPM and Speed of stock and 14teeth sprocket. As you said, 13teeth sprocket gave a punchier pull and more acceleration. But In 14teeth the rider become linear a bit and acceleration reduced and speed increased a bit.
At 5th gear, 65 kmph speed will be reached with 5000RPM in 14 teeth sprocket.
For the 13 teeth 65 KMPH at 5200 RPM.
But time taken to reach speed of 60 is reduced. As TVS said, RTR160 4v reaches 60 in 4.7 Secs. I did 4.1 secs with stock 13 teeth.
But in 14teeth it is 4.8 secs.
Any changes in mileage can be notified because mileage improve for better lesser rpm
I did same but I'm getting good result I was able to do 70 at 5000rpm and 90kmph at 6500rpm
@@RTR_freaker i got 46 while riding at 60kmph @ 4500rpm
I did 0-60 in 3.6 sec on my 160 4v bs6 and now with 13t i was able to do it in 3.8 sec
Tvs apache 200 with the gear I applied 15-56 0-100 km 10sec with 15-57 gear 8sec 😎
i was also planning to do this from long time but i had same doubt abt clearance thanks for this video
See the thing is that, most youtuber doesn't upload their failures risking to lose their subscribers. But you on the other hand, make yourself more transparent to your subscribers and that's truly appreciatable... 👍
Keep uploading such content and good luck bro
Bro your video and narration was topclass! And i instantly subscribed your channel!
Looking forward to more such videos!
Thank you for experimenting and doing it instead us, and showing us the possibility for more improvement over our existing Apache 🙏
You shared your experience after attempt failed.. hats off bro.. excellent work.
Verry insightful video. Thanks a lot for taking out time to try something new and explain an important concept. Cheers!
After checking ur playlist I couldn't stop myself from watching ur videos n I won a rtr 200 too
Wowww, loved your representation brother, would love to see more contents. Real stuffs unlike what other channels are filled with fake news, rubbish mods etc.
Subscribing right away ❤️🙏👍
The best under rated channel. Love to watch your videos.😊
Change the rear sprocket
U can use Duke 200(2014) rear sprocket it will fit.
If u use a rear sprocket with 3 teeth less is also equal to the 1 teeth less of front.
Does it increase the top speed??
Really? Is it fit with apache 200? Rear sprocket?
Duke 200 2012 4hole sprocket is not fit
@@abinabi6519why
Thanks to you kind of CZcamsbers we get dlspme really good information and we don't comit some mistakes thanks a lot bro
Again like other videos of yours this is a Class in knowledge sharing ||"Period"||👌. Keep the momentum going... Neat work 💐
You inspire us all! Way to go bro. :) ❤️
Great Work Brother. Always Doing Things the Best way possible 😃 Keep it up 👍🏻👌🏻
Thank you... You are a very good youtuber.. you always shows the truth if it was a failure also... Waiting for the sprocketing concept video..
This is the greatest channel on mods, fluids,DIY projects for bike . I personally loves this Chanel. Keep up bro
A detailed video about the chain and sprockets and their ratios with respect to rpm. Nice brother, I really enjoyed..✌️
Good demonstration
And great self confidence in learning
Thats an interesting and intellectual stuff you did no one thinks in dat depth
Really Appreciate what you're doing
Thank you so much for appreciating the efforts and motivating me to make more such content on the channel 😊
Keep up the spirit high man,👍👍
Happy to see some one is experimenting.........more power to you✌️✌️
Very informative video 😊 even though you felt you may have wasted a weekend, actually it became useful for your viewers to get some knowledge and to understand what mod is possible and what mod is not. Keep it up Brother 😀
Always happy to see your videos.
Wow very informative all the very best for your future videos 😊
Appreciated your efforts. Keep it up bro.
I can feel the pain of this not turning fruitful but keep your spirits high bro. Love your work.
Always a detailed yet simple video, Sorry for the failed effort but you learned something.. I'm planning to replace the stock 14T of my R15V3 to a smaller 13T sprocket for better acceleration, do you know if the RTR 200's front sprocket will be a direct fit?
Thanks for your efforts...God bless you...
Bro can change ur bikes old headlight unit for the new led unit on rtr bs6
Thank you for your attitude.
Your Channel is Underrated
Your efforts are really good I love it 👍👍👌👌
Tell me bro which upgraded sprocket will fit my gixxer 155 to enjoy cruising.. the current is 16t
Wow I didn't know there was so much science involved just with the number of teeth on the sprockets 😱
Will love to learn more n more from you
superb content..though it didnt acheive the title's goal, it did bring awarness about what needs to be noted before changing sprocket and the drive ratio stuff which i didn tknow about...
what would you recommend for ns160 top speed and acceleration? what i mean best sprocket combination. not stock sprocket
Keep up brother....love from Punjab
i Appreciate your effort👍
Loved Your Job
Please Please make video for Honda CB Shine 4 Speed model. It has got awfully short gearing and anything above 50 strains the engine. Please suggest a replacement socket if not video.
One of the best CZcams channel that I have seen...best wishes bro
What size sprocket should I use for rear wheel for better highway cruising in my rtr 200???
YoYo. LOOKING TO MODIfy my 2017 hornet 160r. Touring purpose. Which sprockets I can use and any full fairing fitment available?
Need help wit a suitable front sprocket for fz25..stock is at 15t need to increase to 16t .. No other Yamaha model can fit please suggest at any other bike if possible.. Thx
Any suggestions for RTR180 sprockets... As RTR 180 also require high RPM for high speeds. Also are there any fuel efficiency changes?... Would be eager to know....
Hello friend . I need a suggestion from you. I have to change the shock absorber in my apache RTR 180 abs. Can i get some suggestions which one is better than the stock one provided by TVS.
brother can i install slipper clutch in my NS 200 of rtr200/dominar 400 any idea please replay
I need little more acceleration and pickup at low rpm in ns 200 should I change it with rtr 200 front 13t!
I m also using this since 2 years in Apache rtr160 ..
It is very easy and comfortable to replace front chain sprocket of 13 teeth to 14 teeth of rtr180..
Performance is good and increase milage also..
Mu handle tilted right side,risky cornering ,try with wheel alignment nothing found... any suggestions
Did anybody upgrade Gixxer chain sprocket? For acceleration.
Please let me know if you have any info
Which brand of chain sprocket should I use for rtr 160 rear disc?
Can i put Ns200 chain Sprocket in my Fzs 2014 model
i sucessfully swapped fzs-fi (double disc) chain sprocket set with fz25 (front sprocket from r15 v2 ; as it is 15T , fzs-fi has 14T) with great results. failed DIY attempts is disappointing (first with braided brake lines and now with sprocketing) but thats how you learn. keep up the good work. 👍
i also suggest you change the damper rubbers with chain sprocket set for longer life.
You have nice technical content. Need your help in one thing. Can we improve Xpulse 200’s highway touring output?
Couple of things I know are, free flowing exhaust, iridium spark plug. Let me know your thoughts:)
Can u let us know . If we could install kick starter in apache RTR 200.
Bro what about. The rear sprocket can we change in order to get the same thing that you have mentioned like slight rpm down
Great video brother, even I was planing to do the same,can you tell me what will happen if we install some other brand like unicorn chain sproket, as rtr chain sproket is a bit costly, and for daily rider like me even after maintainence it last only till 17 or 18000 kms
Which chain sprocket is good for apache 200, stock or rolon brass ?
Always you are best ❤✊
I got Avenger 150, it's 520 pitch chain sprocket kit. Can i install 428 Pitch chain sprocket kit instead of 520.
Nice try. Keep us posted with an update.
I to am struggling a little on highways while touring.
A query- I hear of your changing sprocket they say you'll have to change the whole setup, is it so?
I recently bought Apache RTR 160 4v second hand it ran only 15000km and I have changed the chain sprocket kit to 45 teeth kit and the engine feels restraint as if it's potential in being restricted, engine struggles post 4500rpm 50kmph and at low speeds while using clutch around 3rd gear it struggles with power or rpm
Can you suggest any solution?
Should I go back to stock 44 teeth sprocket ?
I am facing problem in my rtr 200 chain sprocket set noise and it is completely life is over and new set is around 2600 so please suggest me any alternate for change of new sprocket which is not so expensive.
Can i use this visa versa like installing rtr sprocket on my ns200
You can still use the sprocket by filing the gear_liver_cam by one mm by doing so it won't do any major damage and difference in the reliability of the gear_liver
Why not change the rear one? To a smaller sprocket from the RTR 180?
Can i install rtr 200's chain and sprockets in my gixxer 155?
Can i get any rear sprocket for my duke 390? I want top speed so a 42 teeth of any motorcyle would work?
I am thinking about add karizma sprocket ⚙️ in Cbz xtreme. Cbz have a bigger teeth and karizma have smaller. What happened if i do so.
Because i have already karizma sprocket.
Great information bro👍👍
I changed the back sprocket to 42 T and lessed 1.5 chain link. Now its pocket rocket with economy increased least 5 k for daily crusing... Initial pull and lag is less but constant top speed of 120 plus which doesnt bother me. Increase to 47 or to 50 if you are stunting.
Which sprocket did u use (company)any drawbacks?
Which sprocket bro pls reply
interesting topic love very much
What kind of screw driver did you use to open the front sprocket cover?
How can I replace the old chain setup and installation video on ns 200
Been watching your Vids from almost 3-4 years I guess ..love you man...I own an Xblade and for the life of me I cannot figure out how they have kept mild differences in the same Engine which is doing duty on Unicorn 160,Hornet and X-Blade...but being a previous BS3 Unicorn 160cc Owner I know there is a 20 percent increase in power..what exactly they have done I dont know
Hi can i fit a RTR160 (not 4V) rear sprocket to thr RTR200-4V
I was almost planning to do so with my rtr 160 but with the rear sprocket as because the clearance at the back is more in comparison to front one.. well it would be fun to see the outcome results.. btw thanks for the information..
Secondly everyone talks about the engine rpm, carb setting etc etc which doesn't help much.. stunting guys remove headlamps and reduce weight from the front end to make the stunting job easier but non of them have ever talked about gear ration and nor thought of doing so..
I think with some minor changes and modifications we can successfully set the 14T sprocket in the rtr's.. because many times while crusing at highways i feelt a need of sixth gear in my both apache 200 and rtr 160.. btw nice video...
Hey nice try... Keep exploring... Love your efforts
Great effort bro!!!
Can anyone tell which bike model front sprocket with 15teeths works perfectly for cb shine bs4 having 14 teeth front sprocket?
Thanks for your information, bhai Honda CB shine 125 me jab accelerate karte sift tab hi thoda Tak Tak aavaj aata hai, or thoda friction b hota hai, kya karna chahiye or chain chakkar kitne time ya kilometre chalta hai??
Is there any slipper clutch for pulsar 150 2005 model?
Which basically means to me ( ns200) i can go one teeth down n increase acceleration 🤭🤭. You videos the details which no one else provides. Keep up the good work brother.
hi : can i increase the rear sprocket teeth from 44 to 46 since i have increased tyre size from 160 to 170 .... will it compensate the size by the increase of two teeth
Hii i did the same this for my karizma from 13T to 14 T at front and 40T to 36 T at the rear. It's working fine since last 6months...
Anyone used a smaller rear sprocket compatible with rtr200. Would be of great help if anyone could guide me
Hi....hw do you get sprockets alone...i think now a days it comes as a set....can i get 13t front sprocket seperately?
Superb. Video make on this topic
What if u grind the gear road with grinder or u can rub it to reduce the diameter of gear rod and then may be u can use that 14 T sprocket
Hello admin and viewers i have a apache 160 4v and my chain spoket is damaged so what should I do..?
I was hyped about the top speed 😅😅 cheer up we can find another good set to fit in 😁
use full chane setup of apache 160 4v in 200 surely gonna help with top speed
Bro,what is the sproket theeth size for both front and back of Apache 1604v??
Wonderful, have been your sub since long, somehow YT didnt recommend! I thought 428 was on RTR200, Glad got to know from you that it's 520 pitch. How many links are in the chain, Can ou tell? Im soon going to book RTR200 4v, Hence planning my mods in advance. Thanks