Wash the nozzles, pumps, high pressure washers. When the water no sprayed, water does not flow.

One of the reasons why high-pressure cleaners do not spray water, the gauge does not go up or the water is not strong Caused by sediment, slag, limestone deposits on the pump pipe and various valves of the pump.
The solution is to remove the valves to clean. By removing the nozzle of the water pump to clean If too much limestone stains Soak in vinegar for about 30 minutes. The vinegar will corrode the limescale. then polished with a converter and rinsed with water one more time if there is a blower Blow out the sediment completely.
high pressure washer
c.lazada.co.th/t/c.Y0jfrQ
c.lazada.co.th/t/c.Y0jfrQ
c.lazada.co.th/t/c.Y0jfrQ
Review of the repaired Delton high pressure washer.
bit.ly/3gjC3Bw
bit.ly/3gjC3Bw
bit.ly/3gjC3Bw
#Cleaning nozzles, pumps, high pressure washers #Clean the high pressure water pump.