SLOPPY & FLOPPY! Installing Shims On A John Deere Skid Steer Quick Attach!
Vložit
- čas přidán 21. 12. 2021
- The John Deere 329 skid steer has a significant issue with the quick attack skid plate. It is loose in the side to side movement so we have got to get the pin and bolt out to install some shims to tighten it up! It became a SERIOUS issue trying to get that pin out, we beat and banged on it with a sledge and it struggled to come out but luckily we got it out and got the shims in place!
Instagram: idigit4
#SkidSteerRepair
#Mechanic
#Shims
#JohnDeere
#Pins&Bushings
With equipment like this there’s always maintenance to be done! Good job, glad your dad was around to help out! Thanks for posting the video!
I was researching just before tackling this project on my ls180 NH. I cut the middle support and spread the pins apart. Not needing extra washers. My support was bent making it difficult to connect attachments. Thanks for supplying me with this info. 👍
I do these all the time and i can do them in about 45 minutes or so but there is tools that make it easier if your doing them all the time.
Do you have part numbers where I can order the shims?
Fantastic 😊
Ho ho ho Merry Christmas and a happy new year From Down Under 😊👍🥰👍🦌
Good to get those jobs out of the way on a rainy day. There’s always maintenance to do. Take care & cheers 🐨🦘🥰
Yes there is always maintenance to do LOL! Thank you Donna! Have a great holiday!
So how did you get the pin out that was the most important part???
I know it's late as your video is a year old
But that's a taperd pin and seat design
Once that pin get torqued into the seat that's a tight interference fit
Usually we smack the boss(seat) on the top where the taper is with a 12 pound sledge to shock the seat
Pin comes out easy then
If not hit it again
When you torque it
We smack the boss with the 12 pound again and retorque
We repeat until it stops moving
So did you only shim it from one side? Makes sense to me you should have split the difference and done both sides
My brand new Yanmar YT359C came from the factory with more side to side slop than that. Shims is next on the agenda.
Unfortunate
@@idigit4967 yeah,…I know. 😔
Watched whole video just to see what tools you used to get the pin out and you cut it out of the video! Awesome
Sorry! We used a sledgehammer and a pipe and just beat it on it until it popped out
👍
I have the same problem. Do you have the JD part number for those shims? I can’t find them in the JD parts catalog
I don't have the part no sorry. I can ask, my buddy Greg that works there told me these are actually shims for a JD excavator but the pin size was the same so it worked.
Bump
Like to know also
Andrew would have had that done by now.
Good job , but you would have been better off adding 3 shims to each side rather than to add them all just to one side. It would have taken a little longer but would have been the right way to fix it.
Surprised you only shimmed one side, just pay attention to the other side. You pushed the entire plate assembly to the passenger side 1/4 inch so you probably will be fine...
Do you celebrate Christmas, Hanukkah or other December holiday?
Dont understand why deere never engineered a better design they should have never left new holland. This was always a common issue even on the old 200 series loaders
Torque it to 400ft lbs and you shouldn't have a problem
What is the torque spec for those pin nuts?