Spent about 500 miles on it and so far so good. czcams.com/users/postUgkxMesz3KOGEmwmvyKQfLfrRSUXLFzfVHZA Pros:1. Very light2. Solid quality build3. Fast delivery: It arrived 5 weeks earlier than expected.4. Easy assemblyJust a few cons but nothing major:1. Cheap tin tubes and had flat on first day... but not a big deal. I replaced the tubes.2. Seat is a bit uncomfortable but that's pretty much the same situation with most bikes.3. Seat post is a bit long/high for a smaller size 48 bike - had to saw 2 inch off to fit properly. The lowest setting is too high. The post locking system does not seem to hold well (perhaps because I saw 2 inch off).4. wheels are not tubeless compatible (from what I can tell)
The gray one looks fantastic! I also owned the gray one before the black. There's actually a bike check I shot with the gray one. Check out my other videos to find it. Weight is around 8.5 kg with the components shown in this video. Sometimes I change the handlebars, seatpost and the saddle to carbon one and get around 7.8 kg.
Typical of hipsters : they build nice vintage track bikes but ruin them with shitty handlebars They listen music on nice Vinyls set up put put the speakers to close to each other for them to work properly -> form over function, vanity before all other intentions
@@rpavl I need advice, do you think Mavic Ellipse clincher tyre type track wheelset with 20 spokes can be used on a fixied, particularly on Fuji Feather
Hi! Curious about what bottom bracket and crankset you’ve gone with! I know it’s a miche crank but I’d like to know the model and such, I can’t seem to find much info on what bottom brackets and cranksets are compatible with the feathers frame
Ok I see! Can I ask what bottom bracket and crankset in particular you got? I see a bunch of options within those specs, and I’m just too new to all of this to know what fits just by looking at it all yanno? 😅
@@sejongstutz9079 I'm not sure there's a specific model number. Try searching for "skeace crankset bsa" on Aliexpress and you will find it pretty easily. It comes in a set. The only difference is that I sandblasted and repainted mine to get rid of the logos.
@@sejongstutz9079 There's also a Miche Primato 107mm JIS bottom bracket on the market that should fit Fuji. Always wanted to get it but never actually did. 🙂
Dude I'm high AF watching you building your bike on that trippy music, it's the best thing ever
Thanks a mile 🙂
The best part of the video is with the cat enjoying life 🐈🦁 ❤️
incredibly good and calming at the same time
Thank you
Nice build and super calm video
Thank you Dray 🙂
Very nice bike.Really clean looking,nothing unnecessary...😍
Thank you. Yes, you don't need much to enjoy riding 🙂
Beautiful, elegant and simple.
👏🏻
love it...that seat post is touching the BB :)
Yep, almost 😄 It definitely needs a cut.
@@rpavl only if your a weight weenie....
I swear by my Continentals (gatorskin) on my Peugeot Record Du Monde. Your Video = EPIC SIGN FROM ABOVE.
Gorgeous build
Thank you 🙂
Wonderful, pure joy, I wanna ride it
Thanks 🙂
Amazing and clean ! ✨🖤
Thank you
Wow mate, that's an amazing job! 👏🏻👏🏻👏🏻
thanks a mile 👏🏻
Beautiful 🤩. Can you list parts used to build your bike. All the best and enjoy riding your art on wheels..
Thank you 🙂 Maybe I will add it later in the description.
@@rpavl up
Nice build bro, but you forgot the grease on the stem and seatpost.
Haha no I didn't)) I just didn't show it) Thank you 😊
good video
Thank you
Beautiful build!
Thank you!
Sick Fuji
Thanks Roberto
Can you tell me the bottom bracket dimensions? Thanks!
It's a 68mm BSA Hollowtech 2
@@rpavl Thank you!
Nice speakers
Spent about 500 miles on it and so far so good. czcams.com/users/postUgkxMesz3KOGEmwmvyKQfLfrRSUXLFzfVHZA Pros:1. Very light2. Solid quality build3. Fast delivery: It arrived 5 weeks earlier than expected.4. Easy assemblyJust a few cons but nothing major:1. Cheap tin tubes and had flat on first day... but not a big deal. I replaced the tubes.2. Seat is a bit uncomfortable but that's pretty much the same situation with most bikes.3. Seat post is a bit long/high for a smaller size 48 bike - had to saw 2 inch off to fit properly. The lowest setting is too high. The post locking system does not seem to hold well (perhaps because I saw 2 inch off).4. wheels are not tubeless compatible (from what I can tell)
I also have a 2021 in gray and I love it. Which parts did you install and what is the total weight of the bike at the moment?
The gray one looks fantastic! I also owned the gray one before the black. There's actually a bike check I shot with the gray one. Check out my other videos to find it.
Weight is around 8.5 kg with the components shown in this video. Sometimes I change the handlebars, seatpost and the saddle to carbon one and get around 7.8 kg.
Typical of hipsters :
they build nice vintage track bikes but ruin them with shitty handlebars
They listen music on nice Vinyls set up put put the speakers to close to each other for them to work properly
-> form over function, vanity before all other intentions
Everything is exactly as you said
That doesn't sound too bad actually.
May i ask what type of icetoolz did you use? Thankss
Anyways clean build 🔥
Oh, I don't remember which model exactly that was. Sorry. And I don't have it near me right now to check.
that's a decent gear! is the weheelset mavic or it's just the hub itself?
Thank you. These are the Mavic Ellipse without the decals.
@@rpavl I need advice, do you think Mavic Ellipse clincher tyre type track wheelset with 20 spokes can be used on a fixied, particularly on Fuji Feather
@@darkknightt126 Yes, you can use them on a Fuji Feather. I've been riding them for 2 years and have zero issues.
@@rpavl Thank you brother! Safe ride!
It is a great build! What seat post do you use?
Thank you. It is an UNO seat post .
Hi! Curious about what bottom bracket and crankset you’ve gone with! I know it’s a miche crank but I’d like to know the model and such, I can’t seem to find much info on what bottom brackets and cranksets are compatible with the feathers frame
It's the Skeace crankset with the Miche chainring. Fuji Feather's bottom bracket is JIS standard BSA-threaded 68 / 107 mm.
Ok I see! Can I ask what bottom bracket and crankset in particular you got? I see a bunch of options within those specs, and I’m just too new to all of this to know what fits just by looking at it all yanno? 😅
@@sejongstutz9079 I'm not sure there's a specific model number. Try searching for "skeace crankset bsa" on Aliexpress and you will find it pretty easily. It comes in a set. The only difference is that I sandblasted and repainted mine to get rid of the logos.
@@sejongstutz9079 There's also a Miche Primato 107mm JIS bottom bracket on the market that should fit Fuji. Always wanted to get it but never actually did. 🙂
@@rpavl ok awesome! Thank you sm for the help!
Hermosa!!
Thank you! 🙂
how much did it cost in total? it looks super clean, im about to do the same :D
A new Fuji Feather is around $800. The components I installed would be around $800 more.
@@rpavl where did you buy fuji feather?
@@tymurptashchenko9545 I bought it from the official Fuji distributor in Ukraine
Bro, you play too much, what pedals and toe straps are those?
Dartmoor Rush pedals, and the straps are from a local brand
What do you mean by playing too much? 🙂
How much did u pay for the frameset
I didn't buy a frameset separately. I bought a complete bike some time ago and decided to re-build it with the new components.
Hi, what is the empty weight of fuji frameset?
It's 2990g for the 54 size frameset. Frame - 2265g, Fork - 725g.
@@rpavl thank you!
Шикарно!
べりーないす！
ありがとう！
Which pedals and straps?
These are the Dartmoor pedals and the straps are from a small local brand.
Song? It is very calming!
I don't remember. It's from a Google library. Try to Shazam it.
How did you get the frameset?
I bought a complete bike 🙂
@@rpavl Thanks. The fuji feather is pretty sweet but the msrp is quite steep
@@phucle5172 Yes it's definitely too high
can u make the fork polished
what do you mean? it is polished.
I mean silver polished
А что за шатуны используешь?
It's a Skeace crankset without logos
@@rpavl о кайф, не знал что они есть без лого, так намного солиднее и круче смотрится
@@rpavl а ты сам лого убирал или такие и продаются? если что можно ссылку пж
@@bqd.689 It's manually sandblasted and powder coated in matt black.