Woah! How did that not register with me before?! I watch a ton of woodworking shows and am very familiar with dovetails. DUH! And here I am calling them puzzle piece edges. My dumb feeling of the week.
Hi! The top height on my helmet is approximately 5.5" high. But if you need the template already converted into a truncated cone I have attached the link to our store. Templates from all the videos are there in case you would like one. Thanks for watching! www.etsy.com/shop/BlackSheepProps
Hi Octavio! Here is the link to the store where you can get a template for the helmet :www.etsy.com/shop/blacksheepprops You can use the template and watch the videos to show you every tip you will need. You will have to buy contact cement. Thank you!
Yep, the most important measurement is the distance around your head. Measure around your head at your nose and that will give you the length for the bottom half of your helmet. That same measurement will also give you the length for the top half of your helmet. The top half is tapered ( which is called a truncated cone in geometry ) Then you can go to any online calculator for truncated cones ( templatemaker.nl )so you can get a PDF pattern for the tapered top half of your helmet. All the rest of the pieces you can just measure once you assemble the top and bottom half of your helmet. Awesome! Have fun dude!
Hi Octavio! I have never used yoga mats? I guess if they are made from EVA foam they should be OK? Not sure what they are made of? Sorry I can’t be more help.
Hey Jim! The most important measurement is the distance around your head. Measure around your head at your nose and that will give you the length for the bottom half of your helmet. That same measurement will also give you the length for the top half of your helmet. The top half is tapered ( which is called a truncated cone in geometry ) Then you can go to any online calculator for truncated cones ( templatemaker.nl )so you can get a PDF pattern for the tapered top half of your helmet. All the rest of the pieces you can just measure once you assemble the top and bottom half of your helmet. Awesome! Have fun dude!
HI MJ101, Yep, we actually do have a template. Here is the link to our store where you can get templates for every build we have posted : www.etsy.com/shop/BlackSheepProps And here is the link to our channels home page in case you want to see all our other builds and tips videos : czcams.com/users/blacksheepprops The templates are in PDF format so you can print them smaller or larger as needed. Thanks for watching MJ101!
Hey Stephen! Here is the link to our storefront : www.etsy.com/shop/BlackSheepProps In case you haven’t seen all of our builds and tips videos here’s the link to our channels home page : czcams.com/users/blacksheepprops Thanks for watching!
Hi, I’m not sure. I only use a heat gun. Some people try using a blowdryer but it isn’t hot enough. And some people like to use a propane torch. Since you are only bending the top and bottom half of the helmet you should be able to bend it and glue it without heat curving it. When you wait for the contact cement to dry it should stick no problem even if you could not bend it with a heat gun. Hope that helps.
Please give us youre measurements in download we meed the sizes presice to make it im a engineer so what im saying is this vidio is useless if we dont have the sizes so please .
Hi Stiggy! The thicknesses of the foam is mentioned in the videos and here is the link to our storefront where you can get a template. www.etsy.com/shop/blacksheepprops
Hi Stiggy, I sent the link to the where you can get the actual template, is that not what you needed? The templates and the videos are all I have. Hope that helps.
Thanks will do , give thumbs up because you not a dick like other you tubers and vidio still good btw do you do crypto i have a few what is legit to mine on phone and get released on dec and one of them value will be from $30 to $100 and google said they all legit if you interested to have a big chance to be a millionaire let me know .
The puzzle piece edges are actually dovetails.
Nice build BTW 👍🏼
Woah! How did that not register with me before?! I watch a ton of woodworking shows and am very familiar with dovetails. DUH! And here I am calling them puzzle piece edges. My dumb feeling of the week.
How long the parts should be ?
Bro your underrated super cool!
Oh man, thanks!
Hi there, what was the height of your top-half part? (truncated cone)
Hi! The top height on my helmet is approximately 5.5" high. But if you need the template already converted into a truncated cone I have attached the link to our store. Templates from all the videos are there in case you would like one.
Thanks for watching!
www.etsy.com/shop/BlackSheepProps
Donde se consiguen las plantillas?
Yo los creo Aquí está mi tienda.
www.etsy.com/shop/blacksheepprops
@@BlackSheepProps una pregunta todos están en tamaño real.??
Si.
Wow great vid high Quality I don’t think
Thanks AJ!
I dont have dry cement, heat gun, and I don’t know how to the measurements. Tips would be helpful
Hi Octavio!
Here is the link to the store where you can get a template for the helmet :www.etsy.com/shop/blacksheepprops
You can use the template and watch the videos to show you every tip you will need. You will have to buy contact cement.
Thank you!
@@BlackSheepProps thank you. your videos are really cool
Battle damage does not look like that, most of the time is just a gentle skratch.
So, any measuring tips?
Yep, the most important measurement is the distance around your head. Measure around your head at your nose and that will give you the length for the bottom half of your helmet. That same measurement will also give you the length for the top half of your helmet. The top half is tapered ( which is called a truncated cone in geometry ) Then you can go to any online calculator for truncated cones ( templatemaker.nl )so you can get a PDF pattern for the tapered top half of your helmet. All the rest of the pieces you can just measure once you assemble the top and bottom half of your helmet.
Awesome! Have fun dude!
Does yoga foam mat work?
Hi Octavio!
I have never used yoga mats? I guess if they are made from EVA foam they should be OK?
Not sure what they are made of? Sorry I can’t be more help.
I will like to make it but i want to know the lenght of the parts
Hey Jim!
The most important measurement is the distance around your head. Measure around your head at your nose and that will give you the length for the bottom half of your helmet. That same measurement will also give you the length for the top half of your helmet. The top half is tapered ( which is called a truncated cone in geometry ) Then you can go to any online calculator for truncated cones ( templatemaker.nl )so you can get a PDF pattern for the tapered top half of your helmet. All the rest of the pieces you can just measure once you assemble the top and bottom half of your helmet.
Awesome! Have fun dude!
So I’m guessing no template?
HI MJ101,
Yep, we actually do have a template. Here is the link to our store where you can get templates for every build we have posted : www.etsy.com/shop/BlackSheepProps
And here is the link to our channels home page in case you want to see all our other builds and tips videos : czcams.com/users/blacksheepprops
The templates are in PDF format so you can print them smaller or larger as needed. Thanks for watching MJ101!
where do I find the templates?
Hey Stephen!
Here is the link to our storefront : www.etsy.com/shop/BlackSheepProps
In case you haven’t seen all of our builds and tips videos here’s the link to our channels home page : czcams.com/users/blacksheepprops
Thanks for watching!
i was re-watching this and what can you use instead of a heating gun?
Hi, I’m not sure. I only use a heat gun. Some people try using a blowdryer but it isn’t hot enough. And some people like to use a propane torch. Since you are only bending the top and bottom half of the helmet you should be able to bend it and glue it without heat curving it. When you wait for the contact cement to dry it should stick no problem even if you could not bend it with a heat gun. Hope that helps.
You could stick it in the oven, that's how I do it at least
Please give us youre measurements in download we meed the sizes presice to make it im a engineer so what im saying is this vidio is useless if we dont have the sizes so please .
Hi Stiggy!
The thicknesses of the foam is mentioned in the videos and here is the link to our storefront where you can get a template.
www.etsy.com/shop/blacksheepprops
@@BlackSheepProps thanks but i was not talking about the thickness i was talking about the radius and depth and curves in degrees those sizes
Hi Stiggy, I sent the link to the where you can get the actual template, is that not what you needed? The templates and the videos are all I have. Hope that helps.
Thanks will do , give thumbs up because you not a dick like other you tubers and vidio still good btw do you do crypto i have a few what is legit to mine on phone and get released on dec and one of them value will be from $30 to $100 and google said they all legit if you interested to have a big chance to be a millionaire let me know .
Editing I mean
Not I don’t think editing