Review of HDG1 rwd drift car vs DRZ build and set up 1/27th scale
Vložit
- čas přidán 25. 08. 2024
- garagerc.net/c...
• Video DRZ Black GTR in action on the track managed 8 seconds against awd cars which is very good av time is 8.3 and fastest with mini z ve pro is 7.4
Timestamps
Overview 0.27
Close ups of chasis 1.06
Steering angles 3.46
Suspension 5.00
Steering slop on HGD1 6.19
Servo tests 6.58
Silver GTR HGD1 drift test 9.00
Black GTR drz drift test 9.38
Adjusting wheelbase on HGD1 13.58
Amz diff on HGD1 1530
Weight of cars 1628
How cars compared as GTRs 17.01
Adding counterbalance 22.00
DRz durability 22. 42
Yellow rx7 hgd1 table top drift 25.45
(narrow wheels)
Rx7 HGD1 wide wheels 26.50
Final set up hgd1 27.20
[£125.26]HGD1 Rear Drift-Repellent Car 1/28 Electric DRZ XRX Mosquito RC Car Rear Repellent Drift Model RC Vehicles from Toys Hobbies and Robot on banggood.com
banggood.app.l...
![[Review] HGD1 1/28 RWD Drift Car | Build & Setup](http://i.ytimg.com/vi/_c-3Nqis7gs/mqdefault.jpg)
Very detail comparison... well done
Thanks for the comment 👍🏽
Mine just arrived. Seems like we all got it when banggood cocked up the price. Now it's $200+ for all kit with electronics.
I know 🤦🏽♂️ 😂. I've filmed a build video too, but I know if you are doing one, it will be way more useful than mine 😂. I was missing the bearings for the diff in my kit. Had to use off a wl. Look forward to your vid. 👍🏽
@@GarageMiniRCUK I say upload it. The more videos the better. There's little information for this car.
Very nice! Looks like DRZ build will be my next build. Hopefully I can get one shipped in a decent time
Nice drifting & those were great angles! Cool video, never heard of the HGD1, I may have to do some investigation.
Angles inspired by you brother.... Love your chassis shots. I thinks hilarious we both went rwd at same time. Ps I had to get new esc for my ma030. 😭. All my fault 🤦🏽♂️
Garage Mini RC UK oh no! What did you do to your original unit? Did she get burnt out on lipos?
@@BMR3 😂 I accidentally put 4 x 3.7 lipos(14.4volts!!) aaa instead of 2 x 3.7 and 2 connectors 7.2v .(Just thought the bottom 2 cells were connectors didn't check) thare she blows captain! Smoke the works..... Its had no issues with 7.2v. Gutted so I'm doing a video about my stupidity.
15:08 that's what she said
Great video, once again!
Thanks bro 😂
Excellent drift. Thank you for information!
Check out the drzv3 video just live it’s way better
@@GarageMiniRCUK I'm going to order just the drzv3 model, but I also really liked the chassis with the drifting beast 1/24 monster. the suspension works very well there
Waiting on mine still
I got the HGD1 earlier as at the time maybe due to pricing error I was able to get it with full electronics cheaper than it'll cost me to get a DRZ.
I did not have missing parts, I got some extra screws and shims though.
You're right about the diffs though, but generally people use a locked diff as an open one in the back causes understeer under power in some situations when the inside wheel spins while the outside doesn't.
After seeing this I'm trying to stop myself from getting a DRZ too XD, RWD drifting is just too fun.
It was your video that inspired me 👍🏽. To be fair I think it was simple mistake with bearings bangood are usually good for delivery. I am now addicted to rwd. Im still learning how to set it up. What did suprise me was how good it was at 90mm.
@@GarageMiniRCUK Haha and I was inspired by Beaver. The pricing error was pointed out by him before I got it.
I did also try a 90mm setup with the RX7 FC, and it also handled really nice. I also noticed that weight distribution affects the handling a lot. It could be that the 90mm shells place it in a good spot.
I recently ordered a liberty walk R35 from HRC Arena that fits Mini Zs and would probably put it on this to try out the longer 98mm wheel base. Technically a longer wheel base should be more stable.
Great video by the way :D
Really like the detailed comparisons
@@GarageMiniRCUK I just decided to try out some more setups I haven't tried, and I think you should try putting the width to be the widest possible on the top and bottom(0 camber), then use wheels with lesser offset. This let me use all of the possible steering angle. Also, have the front of the car toe out by just a very very slight bit, close to parallel.
This made the car not spin out as much, and you can actually pull off drifts with much higher angle. Only issue is that the steering might bind at 100% so you may need to limit the endpoints.
@@Auranapse great advice I'll try that straight away. It's a joyous thing when it drifts. Thank you.
@@GarageMiniRCUK Hopefully it'll help! I actually found someone local with a DRZ and might get one off him. If I got the time I may make a video of my setup as it doesn't seem like there's anyone talking about them.
Also, I only just found a solution to the binding problem at high locks, I put a physical limiter on the steering arm, using the plastic bushing of the MR03.
What happens is that at the limit this plastic bushing would contact the front of the chassis and just limits the steering from going over the edge which would make it stuck. I'm surprised at how perfect it was as it doesn't restrict any steering movement, only at the extreme limit.
Image for reference:
i.imgur.com/NyxiVnc.jpg
First off great video! I myself have a HGD1 and I love it. Quick question though. I wanted to know where did you find the programming card for the esc for the HGD1? I would love to order one. Thanks.
I got the card off hobbyking. When you buy the esc it should pop up as buy it too. I'll drop a link in this post once I find it. Thanks for the view. 👍🏽
hobbyking.com/en_us/mini-q-slash-mini-q-esc-programming-box.html
Subbed!
Thanks welcome.
Hi, I thought both cars looked good. I liked the video. Just one thing, could let me know which esc programming card did you use on your HGD1 towards the end of the video. I have the same one and I am not sure which one to buy. Thanks.
I'll find the link it's from hobbyking. It's a small black one. When I went to buy the esc they flashed up that card with it.
Ok I couldn't find the link. I have the product code from my invoice.
Uses 9315000338-0 Micro 15A Brushless Car ESC Programming Box . I'll drop the link to the page it list speedo and under it the card
hobbyking.com/en_us/15a-brushless-esc-turnigy-tz4-awd.html?queryID=e65662f40d872857ee61812c8b728b7c&objectID=39575&indexName=hbk_live_magento_en_us_products
Awesome thanks.
What charger will I need for a drz as I’m new to rc cars and have one on the way to me
I'll find you a link you'll need a lipo charger . I use a universal fast charger that you can use for different sizes batteries for bigger rc cars /planes too.
www.ebay.co.uk/itm/352932403892. This is uk style charger please check which country you are in for correct power source.
What AAA LiPo batteries are you using? I first mini z (a ma020 drift readyset) coming soon and was wondering if the LiPo batteries would be worth the purchase.
Ok I use shoshine 350mAh x2 cells and 2 dummy. Be careful not to use more than 2 main cells it will blow the car. Just use nimh 750mah sho orion cells for now it's safer . Once you have experience with the car.... Then go up power
Where have you got the Mazda body??
Mini z with black bonnet decal
@@GarageMiniRCUK thank you :)
Where did you buy the atomic drz in the uk?
I got mine from China. Via miracle mart. Www.miraclemart.com I think that's the address.
my ma020 has a lot of front and rear slopes even with metal upgrades
May need to shim
How you finding the oniski gyro?
I've got one in my amz and it's pretty good responds well to settings and endpoints , better than the skyrc one I used before. For the hdg1 I think it was too heavy. I think to give it a fair chance I should try it in my drz.
I cant find a battery for the drz. Can you recommend one?
hobby wing do one that fits will have to find the link
hobby king not wing
@@GarageMiniRCUK ok thanks ill look into it
Bad steering geometry setup on the hgd01 makes it run badly
Yes we found you have to set it perfectly. 👍🏽