AIR BAG RESET VW/AUDI WITH VCDS
Vložit
- čas přidán 28. 08. 2024
- How to clear an air bag fault code on a vw/audi using vagcom
- Select control module#15 Airbag
- Select option #2 clear fault
- If fault does not clear. Check airbag connections under seat and retry Fault Clear Command
- If fault still doesn't clear, Select control module#15 Airbag
- Select Adaptions, drop down item "learned values"
- Enter code provided by VCDS, "2905", test and save.
- Go back, Select Options #2 clear fault
- Fault should be cleared
If you live in the Greater Toronto Area, Ontario Canada and are interested in coding/adaptations services.
Please Contact me at
www.trackready...
www.trackready...
In the VCDS menu, I am missing the Learned values (vehicles data) item, where do I activate it?
try long coding
Does this clear the crashed car data?
Hey so I’m not sure if the version is the reason I’m not seeing the same as your showing or what.. However could make another video doing this with the updated version
Need your help : trying to retrofit airbag off switch... It seems to detect it in VCDS (shows it as on or off if I turn the switch) but MIL is on and when I go to adaptation my switch is set aas not parametrized.. when I select switch is installed from the droplist and click Do it ! It accepts the coding BUT the value gets back to not parametrized.....
The wire that goes to the tailgate switch…which wire on the switch? My switch had one ground, one positive, and one I don’t know.
Can we do this reset (relearning of Airbags) with the newer software higher than v20.4.2, like v23.11, pls advise
I have the same problem and i try it like you show in the video,but it’s doesn’t clear,do you have a shop in New York ?
So basically install new airbags and then do this. It won't go off when plugged in with breaker fused replace right?. Also do I need to do anything with crash sensors?. Cheers in advanced
Excellent, thank you.
Hello helpp in need ihave A 2009 vw cc and im replace the front seats and afther perform that all the ligths in dash came on air bags stering ttaction control are you have idea how can i fix it??😢😢😢
This isnt working. I tried it.. ive the fault code:
Multi collision break.. could you help me, how can i reset this fault?
Hello, you have any ideea how to reset the ECU with vcds?
Thanks bro
Welcome
I’ve tried doing the same but I don’t have the Learned values but. Do you have to do something special to get it?
Same as well..
Me too… I think it’s because of their version we’re using
i just cleared the dtc's and the airbag light went off?
I thinking for upgrading my steering wheel and the module for a paddle shift and contrôle one.If I use your méthode will it work ?
If everything plugs back in it should be ok
@@GrindinD ok thanks !
I can't access this module, it ask me to turn ignition off then switch it back on when prompted, which I did, and still I get a "no response from the module". I have no airbags problem, I just want to disable passenger side airbags from VCDS because one can't do it manually on Polo 6N2.
Can anyone help me? Thanks.
So Will the airbag still work or is the airbag ”off” like coding remove from ecu
Im asking becouse my airbag light on my Audi A4 1.8t -00. I have replaced the seat to some sport seat without airbag. Or should i only get some relay for it
These instructions are for a reset. If the airbag module is removed the airbag can't be reset.
Hello, i have this problem on new beetle 03' : 1 Fault Found: 00003 - Control Module 014 - Defective, your reset work is this case ? Thanks
You may need to replace the module
@@GrindinD you think that this method will not solve my problem
Does it also work with VCDS lite?
It should
@@GrindinD IF I CRASH THE CAR CAN RESET ECU WITH THIS PROGRAM?
My Friend replaced the front airbags after the accident, the airbag lamp is still shining on the cluster. Is it possible to restart the central computer for the airbag using VCDS
VCDS can reset your airbag fault. I recommend running a diagnosis scan first.
@@GrindinD Thanks
Hmmm, the airbag warning light won't go 🥴 any idea?
Thanks
check the cables under your seat
@@GrindinD ok. airbag light warning happened after sawpping the immobilizer with new one. I have considered al possiblity. Light still ON. 🤓
Get to the point lol