Man, I was just bitchin yesterday about how people yammer on in their how to videos...not you! You did a phenomenal job with this video. The entire video was straight and to the point! Keep it up🤙
This is fantastic - I got my '15 Sienna in 2016 and have been wanting fog lights ever since (it's an LE version). Got the fog light install kit for Christmas and we're going to attempt an install today. Yours is the first video that actually walks through the whole process and you don't edit out the issues you encountered, which I appreciate, since your video is very realistic on how to work through this install. It was because of your video that I knew we'd need extra wire, so we went ahead and ordered it along with the install kit (along with the quick connects, those things are awesome!). Thank you for this video!
Did you model not come with factory harness installed? You should of tapped one of the wires into the dim light connection. That way the fog lights only turn on with the dim or lights on. That’s how I did ton my mom’s 2005 Sienna back in the day. Good job on the video.
For anyone looking for the ignition wire on a 2016 it's the same wire pink above the two yellow connectors, the Fog lights only screw on one side the side you put the brakes inside the wholes pre-made on the bumper other wise the fog lights will look separated from the housing. I had to Dremel a little bit to make them fit. The firewall was not that hard, the running wires was, I put the positive to the starter and the ground under the battery for clean install. I did it backwards started finding the ignition wire and went outside 6 hours.. but it was worth it. Thank you for posting George it was a big help. !! NOTE: My fog light kit came only with one red wire not two for the inside.
Just saw your great video... 1 question: did you HAVE to remove the bumper? Or, can the knockouts be reached (and fog lights installed) with the bumper still on? Thanx bro!
Yeah they are garbage...you'll need a volt meter to find were 12v is coming from when you turn the key for the power source. Then connect ground right there as well for the relay. Then the ground up front for the fog lights as well. There are 2 grounding points in this kit....i connected the red and yellow wire to the same 12v lead for the power and the switch with turn them on and off when you want only when its in the ON or RUN position
GEORGE LOPEZ HOW TO DO IT YOUR SELF yes correct theres one for the relay ground and the other one is for the switch ground, mine was all set last year but im not in the groove of doing it, im only accesing the wheel wells of in front to access the fog assembly, im still using the original cover, i just drilled a hole at the center. Grounding to chassis is the way to go, and its proper to check if its 12v, i will just use a fuse tap ... not good in tapping wires or splicing
@@paulosantiago5555 yes please brother ALWAYS USE A FUSE FOR YOUR OWN SAFETY! I HAD AN ISSUE WITH THE FUSE LATER DOWN THE LINE AND ADDED A DOUBLE INLINE FUSE...2 FUSES CONNECTED TO THE POWER AND THE OTHER ENDS TO THE HARNESS...THAT WAY IT FLOWS THRU 2 FUSES INSTEAD OF JUST ONE.....IT HEATED THE FUSE AND MELTED THE PLASTIC...BUT THE FUSE WAS STILL INTACT 🤷♂️🤷♂️🤷♂️THIS DOUBLE FUSE WITH 2 30AMP WORKS PERFECTLY TILL THE DAY.
GEORGE LOPEZ HOW TO DO IT YOUR SELF i suspected the wires from the kit are so thin thats why there was a short , that happen to me before, and i will play safe with led headlight bulbs.. ty for your infos.
Your video is awesome besides for the fact that I'm quite dissy after watching it. You have amazing content. But you need to master on your video skills. And I would be sending your video to others.
Lol thank you sorry I like to get that close-up shot and not have it on the camera on a tripod, where you can't see anything I'm doing. I really appreciate you and I'll work on them camera skills lol 😅
Very good simple video. Perfect just to see what to expect and get in idea of the job. Thanks man. You!. make the job look pretty easy, sometimes in the video you used to do the work with one hand and the flash light in the other. 👍😁 Jajja
Man, I was just bitchin yesterday about how people yammer on in their how to videos...not you! You did a phenomenal job with this video. The entire video was straight and to the point! Keep it up🤙
Thanx bro really appreciate you!
This is fantastic - I got my '15 Sienna in 2016 and have been wanting fog lights ever since (it's an LE version). Got the fog light install kit for Christmas and we're going to attempt an install today. Yours is the first video that actually walks through the whole process and you don't edit out the issues you encountered, which I appreciate, since your video is very realistic on how to work through this install. It was because of your video that I knew we'd need extra wire, so we went ahead and ordered it along with the install kit (along with the quick connects, those things are awesome!). Thank you for this video!
Lol heck yeah, Your welcome, im glad this helped you thru the process. Thank you for your Support 🙏
Thanks for the video
Your welcome. Hope this works out for you! Thank you for your SUPPORT!
Exactly what I was looking for. Thank you
Your welcome. Glad this Helped! Thank you for your SUPPORT!
Did you model not come with factory harness installed?
You should of tapped one of the wires into the dim light connection. That way the fog lights only turn on with the dim or lights on. That’s how I did ton my mom’s 2005 Sienna back in the day.
Good job on the video.
Do you what wire you tapped into exactly for hot wire. My kit comes in next week.
Your going to need a volt meter to see were active 12 is at and 12v with key is at. A volt meter is a must with this project
Thanks Bud 🙂
Heck yeah, thank you for your Support!
Good job 👍 bro
Thank you! Hope you found this useful!
Good job tnx
Thank You, I'm glad this helped. Thank you for your Support!
Can someone tell me which wire color and location would be for the ignition switch for Toyota Sienna 2016 LE
For anyone looking for the ignition wire on a 2016 it's the same wire pink above the two yellow connectors, the Fog lights only screw on one side the side you put the brakes inside the wholes pre-made on the bumper other wise the fog lights will look separated from the housing. I had to Dremel a little bit to make them fit. The firewall was not that hard, the running wires was, I put the positive to the starter and the ground under the battery for clean install. I did it backwards started finding the ignition wire and went outside 6 hours.. but it was worth it. Thank you for posting George it was a big help. !! NOTE: My fog light kit came only with one red wire not two for the inside.
Just saw your great video... 1 question: did you HAVE to remove the bumper? Or, can the knockouts be reached (and fog lights installed) with the bumper still on? Thanx bro!
Removing the bumper makes it easier to install and run all of the wiring. I would recommend removing the bumper.
@@559powerscape When you want to change light bulb, do you have to remove the bumper again? Please advise.
@@sylee413 no just remove the wheel splash guard over and reach in there to pull out the bulb
I installed everything and of course my switch is to short. Can I buy a harness extension?
Yes. What I did was go to homedepot and grab some lamp wire. Your going to need butt connectors and crimpers as well to make it longer.
Did you buy clear or smoke colored fog lights? Nice video!
I bought the clear set for this vehicle, thank you for your Support
Where did you tap for switch power: to park lights? , im just worrying about that ebay relay , most of them don’t last long.
Yeah they are garbage...you'll need a volt meter to find were 12v is coming from when you turn the key for the power source. Then connect ground right there as well for the relay. Then the ground up front for the fog lights as well. There are 2 grounding points in this kit....i connected the red and yellow wire to the same 12v lead for the power and the switch with turn them on and off when you want only when its in the ON or RUN position
GEORGE LOPEZ HOW TO DO IT YOUR SELF yes correct theres one for the relay ground and the other one is for the switch ground, mine was all set last year but im not in the groove of doing it, im only accesing the wheel wells of in front to access the fog assembly, im still using the original cover, i just drilled a hole at the center. Grounding to chassis is the way to go, and its proper to check if its 12v, i will just use a fuse tap ... not good in tapping wires or splicing
@@paulosantiago5555 yes please brother ALWAYS USE A FUSE FOR YOUR OWN SAFETY! I HAD AN ISSUE WITH THE FUSE LATER DOWN THE LINE AND ADDED A DOUBLE INLINE FUSE...2 FUSES CONNECTED TO THE POWER AND THE OTHER ENDS TO THE HARNESS...THAT WAY IT FLOWS THRU 2 FUSES INSTEAD OF JUST ONE.....IT HEATED THE FUSE AND MELTED THE PLASTIC...BUT THE FUSE WAS STILL INTACT 🤷♂️🤷♂️🤷♂️THIS DOUBLE FUSE WITH 2 30AMP WORKS PERFECTLY TILL THE DAY.
GEORGE LOPEZ HOW TO DO IT YOUR SELF i suspected the wires from the kit are so thin thats why there was a short , that happen to me before, and i will play safe with led headlight bulbs.. ty for your infos.
@@paulosantiago5555 your welcome bro! Thank you for your SUPPORT!
Your video is awesome besides for the fact that I'm quite dissy after watching it. You have amazing content. But you need to master on your video skills. And I would be sending your video to others.
Lol thank you sorry I like to get that close-up shot and not have it on the camera on a tripod, where you can't see anything I'm doing. I really appreciate you and I'll work on them camera skills lol 😅
@@559powerscape Check out ChrisFix to get some basoc camera skills. And before you know it you'll have close to 10 million subs. A real gold kine.
Could you please tell from where you did purchase the switch? Thanks
Mine came with the kit. Sorry.
@@559powerscape Ooh, I see. Thanks for the response, I am trying to find out same that switch for my 2011 Sienna.
mine didnt came with screws for the fog lamps, what size are they?
I'm not sure they were small ones half an inch i believe
GEORGE LOPEZ HOW TO DO IT YOUR SELF oh ok... thanks
Is it the same installation for a Sienna 2017 ?
Yes it should, same body style
Your link is no longer available, is CPW from Amazon a good choice?
Yes as long its for your year make and model you should be good
Where did you get the fog light kit?
I purchased it on Ebay heres the link www.ebay.com/itm/333462952585
Sorry to bother you you said its a pink wire i dont see the pink wire are you sure pink not purple
On my unit it looked pink but I guess it can also be a light purple?...i would check it with a volt meter to make sure. Sorry bro
GEORGE LOPEZ HOW TO DO IT YOUR SELF thank you for your reply i appreciate for your response
@@joeastudillo9551 your welcome man! Good luck! Thank you for your SUPPORT
Very good simple video. Perfect just to see what to expect and get in idea of the job. Thanks man. You!. make the job look pretty easy, sometimes in the video you used to do the work with one hand and the flash light in the other. 👍😁 Jajja
Thanks bro really appreciate it. Thank you for your Support!
Just wire it to the low beam harness and your done.