Great job Dustin, you have good commentary throught the whole video and the step by step without cutting anything was easy to follow. It's a fairly long video but if you cut anything it wouldn't have need as good. Keep up the good work!
hi Dustin i have a 1986 Kawasaki bayou 300 2x4 it pops i have r/r the carb and have put on over 4 carbs still pops will run but trying to accelerate it will pop and no power also did the timing and valve adjustment and checked al electrical and is good pulled the head and valve lapped and no leaks piston and rings are plenty good and compression timing is dead on for the 300 voltage is 14,30 charging replaced the spark pick up is new plug is new lol so any ideas as what i might be missing just incase i have a new ome carb coming in thanks p/s i did replace the cdi and coil just incase
Great job Dustin, you have good commentary throught the whole video and the step by step without cutting anything was easy to follow. It's a fairly long video but if you cut anything it wouldn't have need as good. Keep up the good work!
I'd cut some out but info is key wen you need to know how to fix something thanks 👍
About to buy one of these with carb issues I sure do appreciate this video brother ! Big big help!
Best video I’ve found on these bikes
Also you can identify jis screws by the small punch mark indented into the head of the screw
hi Dustin i have a 1986 Kawasaki bayou 300 2x4 it pops i have r/r the carb and have put on over 4 carbs still pops will run but trying to accelerate it will pop and no power also did the timing and valve adjustment and checked al electrical and is good pulled the head and valve lapped and no leaks piston and rings are plenty good and compression timing is dead on for the 300 voltage is 14,30 charging replaced the spark pick up is new plug is new lol so any ideas as what i might be missing just incase i have a new ome carb coming in thanks p/s i did replace the cdi and coil just incase
The carb screws are JIS screws. Japanese industrial standard ( JIS) screwdriver really helps to not strip those screw heads.
Like all aftermarket carbs you'll need to setup the jetting. It'll never be right out the box, thankfully jets are cheap enough though.
I have both a 300 prairie and bayou l can see you know your stuff
Thanks