Building a Sheet Metal PLENUM and END CAP with Hand Tools!
Vložit
- čas přidán 9. 07. 2024
- In this HVAC Training Video, I show the Process of Making a Sheet Metal Plenum and End Cap using just these few Hilmor Tools, including the new "Pocket Brake". Supervision is needed by a licensed HVACR Tech while performing tasks as Experience and Apprenticeship garners Wisdom and Safety.
Tools Used In The Video
TruTechTools.com Tool List
hilmor Pocket Brake: www.trutechtools.com/hilmor-p...
hilmor Sheet Metal Crimper: www.trutechtools.com/Hilmor-S...
hilmor Handbreak: www.trutechtools.com/Hilmor-H...
hilmor Hand Seamers: www.trutechtools.com/Hilmor-S...
hilmor Blade Crimper: www.trutechtools.com/Hilmor-S...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our Related Videos
• HVAC Sheet Metal Basic...
• HVAC Ductwork Basics! ...
• Quickly Make a Sheet M...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our HVACR Educational Books, E-Books, Workbooks, Cards, Posters, and PowerPoints:
All Our Educational Products on Our Site: www.acservicetech.com/store
All Our Educational Products on Amazon: amzn.to/48pDd82
Mini Split Book and E-Book on Our Site- www.acservicetech.com/mini-sp...
Mini Split Paperback on Amazon- amzn.to/3ytHJSs
Mini Split Paperback on TruTech Tools- www.trutechtools.com/BooksGui...
Refrigerant Charging Book and E-Book: www.acservicetech.com/ac-book
Refrigerant Charging Paperback on Amazon: amzn.to/46xTeHf
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our HVACR Online Resources!
Our HVAC Calculators: www.acservicetech.com/hvac-ca...
Our Newest Articles: www.acservicetech.com/articles
Try our HVAC/R Quizzes! www.acservicetech.com/quizzes
Our Other Resources: www.acservicetech.com/resources
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Tools Used in Our Videos!
Tool Links on Our Site: www.acservicetech.com/tools
Our Tool List on Amazon: www.amazon.com/shop/acservice...
Support the Channel by purchasing tools through TruTech Tools!
Use this link www.trutechtools.com/?aff=8
Save 8% at checkout using code "acservicetech"
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Follow Us On Our Social Media & Podcasting Channels!
Patreon: / acservicetech
Facebook: / acservicetech
Instagram: / acservicetech
X: / acservicetech
LinkedIn: / ac-service-tech-llc
Tiktok: / acservicetech
Spotify: open.spotify.com/show/74KXLz5...
Apple Podcasts: podcasts.apple.com/us/podcast...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
⚠️ Disclaimer:
Information in this video is intended for educational purposes only. Any work related to the topics in this video should be performed by licensed technicians or by apprentices under the supervision of licensed technicians. AC Service Tech LLC is not responsible for any possible damages or injuries caused by the use or misuse of any information provided.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#hvacr #hvacr #hvactrainingvideos #hvactraining #hvactraining101 #acservice #acservicetech #sheetmetal #duct #ductwork #plenum #sheetmetalwork #sheetmetalbending #hilmor
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Shop through Amazon! Your Purchases through Amazon provide a means for channels such as mine to earn advertising fees from all purchases after clicking through. Prices are the same as normal.
If you guys made a book on sheet work I would definitely buy it!
Incredible Video. HVAC is the only field in Residential Const. that I lacked knowledge. I'm grateful I found you.
Another awesome video! I've been at it awhile but I'm learning more all the time thanks to you! Your format is perfect and you explain things very well. Thanks!
Awesome lesson. I also loved how you use grass, carpet and cardboard to show surfaces to roll on. Well done.
Best handmade box I've seen built in a long time. Good Job.
You are the best man Craig seriously! The way you explain things are simple and clear! Thank you so much!
You're a great teacher, we need more folks like you teaching at technical schools!
Excellent training video! Keep them coming.
Thank you for your channel I go to college for hvac and it sad how much more I have learned from your channel than school. I tell all the people at school to watch your channel cause it a so informative. I also have to say that I have charged my first system by watching your charging video.
this tool will change my life I also picked up on a lot of little things you did that will improve my metal work
CRAIG!!! Just, wow! That tool is a game changer. Love it. I've been doing HVAC for over 20 years. Could have used this so many times. the one thing I don't like is raw edges. I fold a hem on the bottom of the plenum also, not just a 90. But this was a great video. Thanks.
Awesome video!! I’ve done commercial refrigeration for almost 30 years.... I’ve always been fascinated with tin knocking..I’d love to learn more.
Your channel has gone next level I love it!!
I love all your videos. And now you’re adding sheet metal, that makes the channel even more awesome!
Thanks! (where do we buy that pocket break?)
Excellent instructions and great visuals. Thanks
Great video. I like how you demonstrated the various backing (grass, carpet, cardboard) for the pocket brake. I did not know of the Pocket Brake. Nice tool. I am particularly interested in your duct making videos. Thank you for sharing.
I am so glad for this man. Great videos.
Thanks !!!! Keep the videos coming. It's exciting to see talent.
Absolute beast mode ! Great video.
Great video, hope you show more in the future, ie: spin collars, dampers, etc. Thanks
Excellent and professional work. We'll done, sir!!
Very informative. Thanks!
I love the sheet metal instruction!
This was done very well!
Gee, that was cool, Craig. A real magic trick.
Watching your videos is like having a trainer right in front of you. You make it look so easy and perfect. Thank you very much for sharing your knowledge. You’re an Amazing teacher. God bless!!
Awesome. Got a whole house dehumidifier and this will come handy.
Excellent video. Thanks.
Excellent video.
Thank you.
Nice job Craig! 👍👍
Very nice job.
Nice job Craig I never seen a pocket break before defenetly be getting one of those thanks so much
@Darren Skinner Thanks for your interest in the Pocket Brake! These will be available at your local HVAC wholesaler - Product Number HPB1701
Thank you for pointing out why the cross breaks. As a DYI it means a lot. The more I know the less I don't know
Fantastic Tutorial !!...TY!
Well done
Great work
Полезное видео!👍👍👍👍👍👍💥💥💥💥💥 всё понятно и видно как надо работать , спасибо!
Excellent work!
Awesome video 👏🏾👏🏾👍🏾👍🏾
I've always folded 1" backwards and 3/8 back over with my folding bar. Good video, always hoping to learn a trick to save some time or make stuff easier!
I was about to ask why he did it this way...I was watching and thinking why not make the large 1 inch bend at 90° up and then flip the tool over and make the shorter 3/8 bend 180° down? seems easier but I havent tried either. Good to know Im not the only one
That is a sweet tool!
You are the best. Thanks for that video.....
This video is definitely better then your last plenum build. You upgraded your skills I see.
Nice a tidy job 👏👌
Great video
Please do more sheet metal work more
Never heard of a pocket break before. I need to get me one of those!
Great tool
I use a ladder edge but will order ..
Thanks for the video.
gracias you are the best señor 👍👍
Cool tool
Thumbs Way Up!
You can brake your metal using a straight edge and awl or side of flat screw driver . Press down hard and pull scoring the metal. Same principle as the pocket brake . I’ve used this technique for years
Ac service tech always so damn thorough !! Could you make a video on making a supply plenum with a offset?
That pocket brake is slick!
@Jose Cortez Thanks for your thoughts on the Pocket Brake! Be sure to grab one, so you have it handy. These will be available at your local HVAC wholesaler - Product Number HPB1701
@@DiversiTechCorp sounds good. Thanks.
Nice.
thanks u really save my life 🔥🔥😂
Nice 👍
Good tools of havc
Definitely want to get one of those pocket brake tools
@Armorize Thanks for your interest in the Pocket Brake! These will be available at your local HVAC wholesaler - Product Number HPB1701
@@DiversiTechCorp thanks. Appreciate you taking the time to go out of your way to let me know the info for it.
awesome. that pocket brake looks awesome and fast. would love to see more field work sheet metal. too many use Pittsburgh machines. the way you did the end cap is much cleaner than using S locks. Do you have a Hensley bender for demoing some sheet metal work? Also real world talk about gauges used for new construction and rework - seems 30 gauge is not code but often sold and used, vs 24, 26, 28 gauges.
Craig love all your videoz and books. can you list just the tools used in this video to make the plenum
Man I’ve been doing this for 25 years and that pocket break looks to be fantastic! Cant wait to get one! I was going to ask how the hell you handbrake that nice and straight where you want it but then saw you used a straight edge but only use the straight edge on a couple of the breaks. I know the cross breaks aren’t important to keep straight necessarily but the 90° fold for your dimension is.
@Herbert4MVP Thanks for your interest in the Pocket Brake! These will be available at your local HVAC wholesaler - Product Number HPB1701
Always wondered how this was done. Great video! Thank you for teaching!
Question: If one is planning to install several take-off collars is there still benefit from cross breaking?
Where is the “Pocket Break” available from? I have never seen one before.
For the last 30 min i been trying find that tool but just cant if someone know where can i find it please let me know
@@MrChido73 keep me in the loop pal!!
Can’t find that pocket break anywhere online, can you provide us a link? This will make things a lot easier.
Where is this Pocket Brake tool at? Did u guy's find out?
Did anyone find where you can buy the pocket brake?
What gauge metal? do you buy a sheet at the local hvac supply? how do you determine the size and volume of the plenum? where is the "pocket brake" available? I googled and the image of that tool does not come up. thanks for the videos
what would i need for a return air filter to the main duck 24x24x1 filter clover
I am told by DiversiTech/Hilmor that their "Pocket Brake" which is a newly released product from Hilmor, is currently being shipping and will be available at your local HVAC wholesalers. It is also available online at TruTechTools.com.
-You can get the hilmor Pocket Brake here: www.trutechtools.com/hilmor-pocket-brake-sheet-metal-scoring-tool.html?=affid43
-hilmor Sheet Metal Crimper: www.trutechtools.com/Hilmor-Sheet-Metal-3-Blade-Crimper-1891186_p_4732.html?=affid43
-hilmor Handbreak: www.trutechtools.com/Hilmor-Hand-Seamers-1891183_p_4758.html
-hilmor Hand Seamers: www.trutechtools.com/Hilmor-Sheet-Metal-12-Folding-Tool-1891146_p_4740.html?=affid43
-hilmor Blade Crimper: www.trutechtools.com/Hilmor-Sheet-Metal-3-Blade-Crimper-1891186_p_4732.html?=affid43
Yes sir I was wondering where this tool came from…
Thank you Craig! If you can't find it at your local supply house, we have them available online for pre-order with inventory set to arrive shortly: www.trutechtools.com/hilmor-pocket-brake-sheet-metal-scoring-tool.html
Hey Craig we met last year at Brian’s and would love to see you show how to wrap a 90 degree round 14 or 16 elbow with duct wrap like we talked about
Joe it was really nice to meet you there! Not sure if I would do a video solely based on that but yeah I remember discussing that whether cutting reliefs or just cutting out sections based on the seams while rolling the metal elbow.
Where i can buy tool set from thailand.
Do you have a video or tips on how to build a return air plenum for the air handler to stand on, as in bottom return plenum. Thank you.
That looks good for a field plenum. Nice demonstration. Where do we purchase the Hilmor pocket brake? I didn’t know there was such a tool. Thanks
Also interested on that pocket brake. A google search brings nothing.
Same here, can't find a pocket brake.
Hilmor gives the wording in there search. Once you click on the pocket break wording, nothing comes up.
I don't know if it's discontinued? But I would like to know where to purchase the product? Thank you
Where's the pocket brake??? I need it 😫
I’m here for the pocket brake. 😎
Good morning where can i find that pocket brake at
You are an awesome instructor!, I have a question regarding the plenum. Can you have a metal plenum transition or reducer connecting to fiberglass duct board?
yeah you can.
Please do a sheet metal transition fab video!
I need to know how to modify return air at the furnace to accept an air filter so the vacuum created sucks the filter tight to the unit. Right now, the filter is in the channel in the unit which allows unfiltered air to bypass and circulate through the house. Not much clearance to replace the filter in the unit due to the unit being placed where the access is facing the so called chimney that vents the CO1. Seems as if no hvac installer wants to waste their time to help out and do some metal work. Not like I’m not willing to pay for the work performed, not like I’ve ever said that’s way too much money for such a small job, I’m a skilled tradesman and know costs, but after watching your video, I feel as though I could do it myself with the correct guidance. AWESOME WORK by the way.
Could you add foam weatherstripping to the channel?
Good job Teacher, what is the name of the tool to do the cross break. All this years building plenums never seen this tool. Thank you
This guy is good, he makes it look easy!😄
Thanks again for your time and sharing of your skills.
There are no links to purchase the tools used in this video. Can you give those please? Thanks
@Ivan Hall Thanks for your interest in the Pocket Brake! These will be available at your local HVAC wholesaler - Product Number HPB1701
Please tell me where I can order the indentation kit for metal sheet?
Outstanding training video, detailed yet simple. I enjoy watching all of your training videos, you have the talent to teach in simplified fashion. Your information is highly valuable and your expertise in HVAC industry is very much appreciated.
Pocket brake tool you introduced is awesome, but I can not find it anywhere online including Amazon, could you please share a link where to find it.
Thanks
@gorbikara Thanks for your interest in the Pocket Brake! These will be available at your local HVAC wholesaler - Product Number HPB1701
Did you find where to get the pocket brake?
Yes online TruTech Tools have it, ordered and got it works great
@@garykaraoglanian624 Thank you
What gage steel are you using? We only stock 26 & 24 gage
Hi sir, how to check compressor pumping?
I've watched this video 100 times atleast
.
Maybe a vynil penny roller would work🤔 but since most of my tools are hillmor I think I’m going to buy that pocket brake to add to my collection, it’s not a need but a must have little toy.. besides I’m impressed with hillmore tools, good quality
Can someone tell me why v notches are use for the flanges?
I can't find the hand brake you are using. Can you send me a link? Thank you.
Where did you get the pocket hand brake? Didn’t see it on your tools list. Thanks Craig!
@Jimmy Landers Thanks for your interest in the Pocket Brake! These will be available at your local HVAC wholesaler - Product Number HPB1701
What's pocket break and how to find the tool ??
thanks for sharing the awesome video. what gauge is the sheet metal? Great tool.
It's probably 28ga, maybe 30. I've run metal shops all my life, residential and commercial, and I've never made duct or plenums out of anything lighter than 26 because anything lighter is nonsense. Any reputable metal tradesman would tell you the same. And this tool would therefore be worthless.
Info on the bender please
When you broke the sheet metal on the grass, was that just to simulate field brakes?
Sure. We've all hacked out ductwork out in the field.
Здорово))
What's the gage of the sheet metal ?
This is great for on the fly jobs. But if you're gona use s slip why not save the trouble of doing a recessed cap?
Any videos on how to make transitions?
Foil tape can also be used on the supply side to seal a plenum. As far as the Return side, it doesn't matter. These can be constructed with typical construction materials like wood and sheet rock and don't need to be sealed, necessarily. Spent quite a bit of time building supply plenums in New Construction housing. Don't have to do that on the service (diagnostic side) that much at all. I don't like climbing into rafters and working in close-quarters. I have the brain for the service side, so I'm ultimately glad that I'm done with that 'new construction' part of my life.
What about this pocket brake your using, where did you find that?
Great video! I was not able to find your pocket brake tool in the tool list/Amazon store.
@Tech Skills Thanks for your interest in the Pocket Brake! These will be available at your local HVAC wholesaler - Product Number HPB1701
@@DiversiTechCorp I couldn't find one locally. I just placed a backorder for one of these pocket brakes through the link you provided in the AC Service Tech LLC pinned comment. Thank you for helping us find a place to purchase one of them. If it works like it did in the video, I know several other people that will want one for themselves.
@@DiversiTechCorp : I received my Pocket Brake.
I used it this week to fabricate some changes to a return air duct work installation.
It is an AWESOME tool! I recommended it to other technicians.
Where can I find that pocket brake in Colorado Denver
www.trutechtools.com and use our 8% off coupon code: acservicetech
Can you guys do a video on how to build a star collar
Supposedly this is a Hilmor product, but they show no such tool on their website as of 1/8/2021. I have a feeling Craig got his hands on an early release of a new tool that is not yet available to the rest of the general public. Looks great though. I'd love to hang up my window screen tool.
@Greenyone Thanks for your interest in the Pocket Brake! These will be available at your local HVAC wholesaler - Product Number HPB1701
Great video, as always. As many of the other comments have mentioned, no link to the Hilmor 'Pocket Brake'. Is this a prototype you're testing or is this a new tool coming out soon? Nobody can find it searching the internet. 😞 I'll keep watching your posts to see if you reply. I could have used this a few weeks ago.
@Joe Jesko Thanks for your interest in the Pocket Brake. Be sure to purchase one for your future jobs! These will be available at your local HVAC wholesaler - Product Number HPB1701
How much is usually charged for installing ducts in Arkansas?