SEAT LEON MK3 - How To Remove The Car Battery Removal Replacement 2013-2019

Sdílet
Vložit
  • čas přidán 6. 09. 2024
  • Guide on how to remove the car battery from the engine bay, on a Seat Leon Mk3 (5F), models 2013-2019.
    Tools used:
    -10mm Socket & Ratchet: amzn.to/2NWrfON
    -13mm Socket & Ratchet / Extension: amzn.to/3luPyQv

Komentáře • 17

  • @SelectVehicleSpares
    @SelectVehicleSpares  Před 2 lety

    Tools used:
    -10mm Socket & Ratchet: amzn.to/2NWrfON
    -13mm Socket & Ratchet / Extension: amzn.to/3luPyQv

  • @TheNitonman
    @TheNitonman Před 2 lety +13

    You should remove the negative lead first and connect it last when refitting.

    • @kadirtas6280
      @kadirtas6280 Před 8 měsíci

      Kesinlikle katılıyorum. Önce negatif daha sonra pozitif çıkarılmalı

  • @wassiliproductions
    @wassiliproductions Před rokem +1

    Thank you for the tutorial. Often seems very straight forward but always nice to check before doing it yourself!

  • @hhcollective
    @hhcollective Před 9 měsíci +1

    I've been told by seat that it's £200+ to replace my battery and have the required coding done.
    I've changed batteries a few times, pretty straightforward but do you know of any coding required for the vehicle after a battery change? First I've ever heard of it.

    • @fireblade8905
      @fireblade8905 Před 8 měsíci

      No. What happened?

    • @flameroo
      @flameroo Před 8 měsíci +1

      If you change to a different style battery from AGM to EFB or vice versa it needs to be coded in so the battery is charged correctly. Will still probably work fine without but might affect the life span of the battery if not coded correctly.

  • @MariusXMelisa
    @MariusXMelisa Před rokem

    I did that, and now my steering wheel controls don’t work, only the horn. What should I do?

  • @peterjackson8409
    @peterjackson8409 Před 2 lety +1

    What about car alarm and radio code? Always concerned that reconnecting won’t automatically make these work. Do you still need a 12volt auxiliary feed to protect codes???

    • @SelectVehicleSpares
      @SelectVehicleSpares  Před 2 lety +1

      On our vehicle there were no codes required when the battery was re-connected, we haven't seen any Leon Mk3's that required a code.

  • @treetrunk48
    @treetrunk48 Před rokem +1

    Do you have get Seat to reprogram ecm as a new battery is put in

  • @Nadk2010
    @Nadk2010 Před 2 měsíci

    Same for cupra 290?

  • @aidenjackson1554
    @aidenjackson1554 Před rokem

    Hello. Would you recommend to disconnect my battery on my Leon Fr 2017 (it’s stop/start) since I won’t be driving it for 4 months? Will it effect anything when I come to drive it again? Thank you

    • @SelectVehicleSpares
      @SelectVehicleSpares  Před rokem

      There shouldn't be any need to disconnect it, but if you do then you may get a few warning lights when the car is started back up. In our experience these go away after a few hundred metres of driving the car. We would recommend a battery charger over disconnecting the battery.

  • @Tokosaba
    @Tokosaba Před 2 lety

    Hello! should i disconnect or remove my car battery when not in use? Mk3 with Start Stop. 1-2 week standing