PFAFF passport 2.0 Owner's Class

Sdílet
Vložit
  • čas přidán 25. 07. 2024
  • In this video, Dalene McDonalds demonstrates how to thread, wind the bobbin, and use the basic stitches on the PFAFF passport 2.0.
    -- Contents of Video --
    00:00 Beginning
    02:32 Winding the Bobbin
    06:10 Threading the Machine
    08:08 Straight Stitch
    09:38 Lightweight Knit
    14:01 Denim
    16:36 Seam and Overcast Stitch
    18:55 Blind Hem
    20:48 Button Hole
  • Jak na to + styl

Komentáře • 64

  • @patriciaspates4663
    @patriciaspates4663 Před 4 měsíci +2

    Thanks so much for sharing your knowledge! So very helpful. I’ve inherited a slightly used Passport 2.0 from my mother-in-law who quilted for years. I only received the machine-no manual, no foot control, no accessories. It’s been years since I’ve done sewing, so your video has been a lifesaver and time saver for me! Thanks so much!

  • @saraaronzon4562
    @saraaronzon4562 Před měsícem +1

    Thank you so much. Enjoyed this teaching again.

  • @janemeekyounker9063
    @janemeekyounker9063 Před 2 lety +6

    I bought my machine from a friend that was upgrading to another sewing machine. This is an excellent video and shows some fantastic instruction. I really enjoyed this tutorial.

    • @lizzlepoo
      @lizzlepoo Před 2 lety

      You got a great machine! I'm glad you found the video helpful. Dalene

  • @odellpark
    @odellpark Před 4 měsíci +1

    So glad I found this tutorial since I was just gifted a Passport 2.0 from my sister. :)

  • @trinemartinussen2988
    @trinemartinussen2988 Před 7 měsíci +1

    I have had my Passport 2.0 for 5 years now, and leaened so much from this video that explained so much. Thank you!!

  • @jeridaniel4844
    @jeridaniel4844 Před 3 lety +6

    Thanks so much for this tutorial. I have had this machine for about 5 years with no lessons on it. Now I love the machine even more! Learned so much! Thanks!!!

  • @aloeveraa1
    @aloeveraa1 Před 10 měsíci +1

    Thank you for this video. I have the same sewing machine I got as a gift for my birthday and I haven't been able to sew on it because I could not set up the machine 😅 This will help me to start. 🙏

  • @catehaller5992
    @catehaller5992 Před rokem +1

    Thank you very much! I am ready to try a buttonhole now!

  • @yuriihryshchenko2667
    @yuriihryshchenko2667 Před 3 lety +1

    Моя хорошая.. Нервничаешь.
    Спасибо за обзор, купил, и не жалею!!!

  • @nathalieremond794
    @nathalieremond794 Před 3 lety +4

    Many thanks for your help from FRANCE 😉

  • @lmathies
    @lmathies Před 2 lety +1

    Really enjoyed this tutorial. Thanks very much.

  • @lucquinmathilde4464
    @lucquinmathilde4464 Před 2 lety +2

    Great and very useful video !! Thanks a lot !!

  • @silviatarabusi3207
    @silviatarabusi3207 Před 10 měsíci

    Thank you vero mucche for information

  • @enjoylife3000
    @enjoylife3000 Před 3 lety +3

    Thank you so much, great tutorial

  • @diannahuss9552
    @diannahuss9552 Před rokem +1

    Thank you you are very helpful.

  • @angelacorsetto6790
    @angelacorsetto6790 Před rokem +1

    Thanks!! Great video

  • @drewk1514
    @drewk1514 Před 3 lety +2

    Very clear explanation and demonstration. You also gave some helpful hints--I did not know that a spool cap wasn't necessary with a mini king spool of thread. No wonder mine was always getting tangled up.I have a Passport 3.0, which has a few more features. Passport is a powerful, sturdy, compact machine.

  • @saraaronzon4562
    @saraaronzon4562 Před 3 lety +1

    Nice video thanks so much

  • @6BelleGunness9
    @6BelleGunness9 Před rokem +1

    Thank you:))

  • @williampmcd8548
    @williampmcd8548 Před rokem +1

    Thank you.

  • @koshelen
    @koshelen Před 2 lety

    Дякую, дуже допомогли 👍from Ukraine

  • @flmk974
    @flmk974 Před rokem

    Great.
    Please show us how to remove the top cover (to remove a stuck thread in the thread path for example).

  • @Jinxid77
    @Jinxid77 Před 3 lety +1

    Is it possible to do light weight leather with this machine? (with the right needle of course) - I'm thinking of getting the passport 2, 3, or select 4.2, but I am unsure which suits me best. - I will not be travelling, but the easy storing is a benefit.

  • @ruthwood461
    @ruthwood461 Před 2 lety

    Thank you for your tutorial on working with the one stop button hole foot on the Pfaff Passport 2.0. I’m following your instructions and when I press the power button to sew my machine just squeaks.. as if I’ve left the foot in the up position. Which I haven’t it is lowered ready to sew. Please can you advice me what to do? I’ve turned my machine off and on again, but still it doesn’t sew it just squeaks. Fingers crossed you can help. Ruth UK

    • @dalenemcdonald-mcdonaldsse8689
      @dalenemcdonald-mcdonaldsse8689  Před 2 lety

      Hi, Ruth, I'm afraid I don't know what might be causing your machine to squeak. The only thing I can suggest is that you take it to a dealer and have them look at it.

    • @ruthwood461
      @ruthwood461 Před 2 lety

      @@dalenemcdonald-mcdonaldsse8689 Thank you Darlene, I found that I needed to pulled down a button hole lever which sits on the left of the needle and behind the threader. Once that was placed in the position between the two arms on the button foot. It worked brilliantly. Thank you for you Tutorial.. I just missed the bit about the button lever.

    • @dalenemcdonald-mcdonaldsse8689
      @dalenemcdonald-mcdonaldsse8689  Před 2 lety +1

      @@ruthwood461 Oh, good! I almost asked about that, but I thought the machine would still try to sew. Glad you didn't have to take it in for service. Dalene

  • @veronikaevers7324
    @veronikaevers7324 Před 5 měsíci +1

    Dalene, where can I get a copy of the stitches from the book as I can not find my manual. Thank you

  • @carolinefox2244
    @carolinefox2244 Před 2 lety +1

    I am having trouble stay stitching my cotton/poly blend (gauzy like fabric) . The tension is too tight. How do I adjust tension??? Using Aurofil thread. Also - I can't get Pfaff bobbins to fit on bobbin winder. Only the few bobbins that came with the machine fit. My Pfaff dealer insists that they should fit. ??? Thank you

    • @dalenemcdonald-mcdonaldsse8689
      @dalenemcdonald-mcdonaldsse8689  Před 2 lety

      Hi, Caroline. This machine uses Class 15 bobbins, not the PFAFF branded bobbins. It's been a while since we've had one of these machines in stock because of COVID, but we have one now. I'll look at the tension when I'm in the store tomorrow and get back to you.

    • @dalenemcdonald-mcdonaldsse8689
      @dalenemcdonald-mcdonaldsse8689  Před 2 lety

      The tension knob is on the top of the machine. You would adjust it down to reduce the top tension.

  • @tanyalicata4739
    @tanyalicata4739 Před 3 lety

    I am having problems with tension. How can I fix that?

    • @dalenemcdonald-mcdonaldsse8689
      @dalenemcdonald-mcdonaldsse8689  Před 3 lety

      Is the foot up when you thread the machine? Make sure you floss the thread into the tension discs with the foot up when threading. What type of fabric are you using? Are you using good quality thread? Thread that is labeled dual duty or all purpose will often cause tension problems.

  • @LoriScottWooster
    @LoriScottWooster Před 2 lety

    My bobbin keeps jamming ? Does anyone know why it is doing this? It is a pretty new machine to me.

    • @lizzlepoo
      @lizzlepoo Před 2 lety

      I suggest you take it to your dealer.

  • @beckydickson1135
    @beckydickson1135 Před 3 lety +1

    She leaves out a crucial piece of info on buttonholes - pulling down that lever behind the needle threader. I had to watch a different person's video for Passport 3.0 to find out. You can see she has the lever down but she never says how it got there.

  • @shelbychong8968
    @shelbychong8968 Před rokem

    How don’t use the gathering foot

  • @kokok412
    @kokok412 Před rokem +1

    good video, just wish camera was showing closer to show details.. too far now to see

  • @frankjanvari8650
    @frankjanvari8650 Před 3 lety +1

    hello very nice video please if you have one please kindly film a pfaff 2508 sewing machine video tutorial please ok?please kindly reply back ok?thank you very much

    • @dalenemcdonald-mcdonaldsse8689
      @dalenemcdonald-mcdonaldsse8689  Před 3 lety

      Hi, Frank. I'm afraid we don't have a PFAFF 2508 machine in stock, so I can't make a tutorial on that one. I wish I could help. Best of luck.

  • @marieangehermann309
    @marieangehermann309 Před 3 lety

    pourquoi pas de sous titages??? j ai achete cette machine pfaff à Toulouse merci beaucoup pas de sous titrages

    • @dalenemcdonald-mcdonaldsse8689
      @dalenemcdonald-mcdonaldsse8689  Před 3 lety

      Notre magasin est aux États-Unis. Je vais regarder comment ajouter des sous-titres dans d'autres langues. J'utilise Google Traduction. J'espère que cela a du sens.

    • @latelierduherisson5830
      @latelierduherisson5830 Před 2 lety

      Bonjour
      Que pensez vous de cette machine suis de Toulouse aussi

  • @REDJ1
    @REDJ1 Před 2 lety +2

    The camera angle wasn't that good.
    Maybe hire a new camera man/woman?