Just another added note is that the trim bezel needs to be filed to accept the Eonon as its measurements for a double din are slightly larger that the US standard specification. Took me about an hour with a vise and a good sharp file.
Hey I have the same car, I bought a metra harness and it didn't have a red wire to hook up the 12v accessory turn, I was wondering did you know how to hook it up?
Mustangsvofan Its been quite a while since I wired it. The schematic on your aftermarket radio and the schematic on the Metra should give you all the info you need. Without seeing both of them I wouldn't be be to say. I do remember some wires were not used on my setup.
I jus replaced the radio in my g6 an when I installed the new information screen from the same kit you used, I jus can’t figure out how to change time on the screen. All though I was able to change time correctly on the new aftermarket radio, I’ve tried going through all buttons on the screen (info, menu, an enter) an I cannot figure out how to change the time I’ve even tried holding buttons,
I have a pontiac g6 2006 and have the original radio to it and i want to change it but i dont wanna lose my warning info i was told i needed a adapter so i wont lose it witch one is it ?
I personally think it is really dumb that GM decided to put all of your driver information into the radio because it makes it really hard to change the stereo as harnesses that retain the Driver Information Center are over $200
Just another added note is that the trim bezel needs to be filed to accept the Eonon as its measurements for a double din are slightly larger that the US standard specification. Took me about an hour with a vise and a good sharp file.
Is there anyway i can see on how you wired it
Hey I have the same car, I bought a metra harness and it didn't have a red wire to hook up the 12v accessory turn, I was wondering did you know how to hook it up?
Mustangsvofan Its been quite a while since I wired it. The schematic on your aftermarket radio and the schematic on the Metra should give you all the info you need. Without seeing both of them I wouldn't be be to say. I do remember some wires were not used on my setup.
I jus replaced the radio in my g6 an when I installed the new information screen from the same kit you used, I jus can’t figure out how to change time on the screen. All though I was able to change time correctly on the new aftermarket radio, I’ve tried going through all buttons on the screen (info, menu, an enter) an I cannot figure out how to change the time I’ve even tried holding buttons,
www.g6performance.com/forum/archive/index.php/t-25025.html
I have a pontiac g6 2006 and have the original radio to it and i want to change it but i dont wanna lose my warning info i was told i needed a adapter so i wont lose it witch one is it ?
The kit and part number I used is shown in the video.
Did that radio come with the car and u added the Info wanring box to it after?
No, I installed the aftermarket radio. The kit I used had the bezel to install a double din radio in it as well as the info center box.
When u installed it did u lose all your Warning info on the car and steering wheel system?
No, that's why I installed the kit...as far as steering wheel controls....my daughters car didnt have those.
so this is useless... to have display in the glove box sad
I personally think it is really dumb that GM decided to put all of your driver information into the radio because it makes it really hard to change the stereo as harnesses that retain the Driver Information Center are over $200