Video není dostupné.
Omlouváme se.
BEST Front Lip for a Daily Driven GR86
Vložit
- čas přidán 23. 05. 2023
- HT Auto GR86 Front Lip: www.htautos.co...
Front lips often get destroyed on daily drivers due to the abuse it can be subjected to. Let's test out a more affordable and durable alternative to a carbon fiber front lip. The HT Autos front lip looks great and will hold up to the daily abuse!
Driven Media Merch & Overlays:
► www.driven.med...
►GR86/BRZ LED Upgrade Kit: www.driven.med...
►GR86/BRZ Reverse LED Upgrade: www.driven.med...
Discounts
Dress Up Bolts
► Use code KV23 to get 10% off on www.dressupbol...
3d Floor Mats
► Use code "KEVIN3D10" to get $10 off on 3dmatsusa.com/...
Import Bible
► Use code KV23 to get 10% off on importbible.co...
2022 TOYOTA GR86 MOD LIST:
»$35DIY 4th Brake Light: amzn.to/3SRG3L8
»Positaps: amzn.to/3SRAQTl
Bride Stradia III Seats
Sayber Design Carbon Fiber Front Lip
FactionFab F-Spec Coilovers
Cusco Strut Tower Bar Front
Cusco Strut Tower Bar Rear
Cusco Front Lower Control Arms
Cusco Adjustable Rear Lower Control Arms
Cusco Adjustable Rear Toe Arms
Cusco Rear Trailing Arms
Cusco Rear Upper Lateral Control Arms
ARP Extended Wheel Studs
5mm Wheel Spacers (Front)
Yokohama Advan TCIII 18x9.5 +45
Kumho V730 255/35r18
ECUTEK E85 Tune w/ Graham from Boosted Performance Tuning
Compressive Tuning Carbon Fiber Engine & Fusebox Cover
DressUpBolts Stage 1 Engine Bay Titanium Hardware Kit
Perrin CAI
Verus Engineering AOS
Verus Engineering Oil, Coolant, Washer Fluid, Brake Fluid Caps, and Cam Sensor Covers
Tomei Type D Dual Exit Catback Exhaust
Circuit Demon Custom Headlights
JDM Clear Sidemarkers
Twins Carbon CF Center Console, AC Vent, Steering Wheel Covers
FOLLOW ME:
►Instagram: / thekevinvo
»Music I use: share.epidemic...
Disclaimer: As an Amazon Associate I earn from qualifying purchases.
Ramps to enter and exit your driveway. That’s gotta be a major PIA. What we must endure to look good and MOD.
Kevin, I don't watch a lot of your videos but I just wanted to send you a heartfelt thanks. A while ago you did a video on the rubber plug on top of the trans falling into the rotating clutch assembly of the gen 1's. After seeing your video I kept it in the back of my head to check that plug any time I did an oil level check. Well, today I did an oil check right before I was going to go on a 200 mile trip across the state and sure enough that plug had worked it's way up and halfway into the port and was in danger of falling in. Thanks to you I avoided any potential damage and PITA on a trip so thank you very much!
You may already know this quick tip, but for eurathane lips like this, use tire shine on it after you clean/dry the car, will make the black deep again if it starts to discolor. Learned this with my miata lip
A ceramic coating like Gyeon Trim is a much better solution. Had it on my car for 4 years now and still looks like new without needing a re-application.
This lip looks great and is way more afordable, will definitely consider buying one (still waiting for the car atm, in France the delays for GR86 are insane, 20 months to get one more or less). I really thank you for sharing with us all those great and tasteful mods 👌
Wrap electrical tape around your drill bit as a drill stop so there’s no chance of drilling to deep.
My issue is where it meets the bumper. To me it looks like it's for a different car or something. I guess I prefer a design where it's molded to meet the edges of the stock bumper because it looks more like it belongs.
Keep up the good work Kev :)
That's definitely a valid opinion to have! The Sayber Design lip I had on the car did a really good job of that.
@@KevinVo, that it did, but I would have swapped it the same as you. Hope you find a lip that does everything you want it to!
Love this lip! Accentuates the bumper perfectly. Just brought home my '23 Pavement GR86 the other day... Love your videos G!
Nice! I went with the Pavement option as well and picking it up this Saturday. I can't wait!! Pavement bros.
That's clean and subtle and smooth. I used the oem subaru sti lip for my 2018 brz and same words as before. No need to worry about fitment. Looks awesome
Hey Kev, thanks for the suggestion! I think this lip looks great and i can let it rub all day long without worrying. Just bought it!
Finally a nice affordable lip with EU shipping as well!
It's very clean! I had the same issue, driveway scraping. I went from a lip to splitter and I absolutely love it.
The Lip looks great! Keep up the videos, love the amount of things you’ve tried to put on this car to help us build ours.
Curious as to how the new exhaust is holding up? Considering the single exit one but am afraid of the tin noise, especially after headers and further performance mods. What are your thoughts?
I don’t know why but you filming outside is sooo much more vibrant instead of the garage 😅. The colors in this video are 💯
It's nice to be able to film outside without freezing to death now haha
Keep it up. Youre the most 86 enthusiast of all 86 enthusiasts. Eff what everyone else says. Wish the best for you and your channel. Keep it up man.
Yo.. this lip looks gorgeous with your front bumper bro!
Thank you!!
That quick jack is fire, like having a mini lift!
It's definitely worth the investment for me.
I like the verus front splitter. I like the rods look, idk why. Wanna get it and eventually remake the splitter out of carbon fiber though and try doing carbon fiber for the first time on a relatively easy mold.
Dang looks awesome!! Where's the 22+ BRZ version though!!!????
I'm sure they're working on it!
That lip is fucking dope. Got that OEM+ look to it. Love how it compliments all the black accents on the front bumper.
Definitely one that'd I'd recommend!
Just placed my order! Thanks for the lead, Kev
Daaamn, looks good fam!
I've seen people complain about the way it looks kind of separated or tacked on to the bumper and less like a natural extension of it but I actually kind of prefer that on darker cars. Like this would look great on my black 86. Hell I think it looks good here it just needs something else on the sides/rear to tie it in better.
Got a black one as well. Something to consider.
Not bad for the price but I wish it followed the lines of the bumper a little more. Could it be a patent issue?
Collared bit works great for that.
If I had a GR, I would definitely buy that. Nice work.
Looks great! Thanks for the content.
Thank you for another great review and pointing out things to watch for!
Big Kev upload lesgoooo
Looks really good!
looks so good bro
would try some good 3m double adhesive tape for the tricky middle part
It comes with some preapplied!
The front lip is a must.
Absolutely!
@@KevinVo I went with the Toyota GT86 / Scion FRS Body Kit. Front Lip, Sides, Rear Spats.
You have i new camera? Its so crispy😍
Nope, same camera! Good lighting that day haha
That wheel fitment kevin lol. That has to be next for the gr86
New wheels soon!
Great Content ! Just acquired an 2024 GR86 couple of weeks ago. I have inmind this Front Lip for it.
Also, what front tow hook License plate mount is that on ur car?
Looks great!
Imma need the link to that Jack stand my boiii
Quickjack 5000tl
Nice looking front lip!! I'd totally rock it and buy right now, however.... judging by the vid my driveway is at a steeper angle than yours so if you barely cleared it with minor scraping then I don't think it'll work for my driveway 😢 Maybe I'm just destined to not be able to install an aero kit. I could do side skirts but I don't think it'll look right without a front lip. Front lip without side skirts would work but the opposite, I think will look odd. What do you think?
We need more bloopers brother!!! Lol
Hi Kevin, thank you for this video.
Could you please drop name/link for the ramps you used on this video to lift your car off the ground.
When did you change your wheels? Car looks spectacular as always
I sold the wheels that were on the car. New ones will be on there soon!
@@KevinVo nice. Look forward to seeing them
u dont have OFF so the mosquitoes doesnt bite u?
Looks great! Good price too.
I think you could use some wider ramps to leave your driveway haha.
best mods for daily drive would be a good video
Hey family how does she do in these Iowa winters? I’m in Davenport and I literally just copped a gr86 yesterday I love it my only concern is the winters get nasty have you had yours through a winter here yet or no?
Where did you get that plate holder?
From a company I can't recommend unfortunately.
@@KevinVo oh okay understood is there any front plate holders you can recommend? I’d rather not drill the front
Why did you buy the GR86 ?...If it wasnt for SUBARU BOXER engine the BRZ/86 Project would never have started...the SUBARU BOXER engine is the heart ❤ of the car...plus...SUBARU are doing all the hard work...and building both 😮😮 !...good to see the BRZ outsells the GR86 at more than 2 to 1 😊
I like how it looks better haha
@KevinVo
Did you have to remove the under tray and bumper insert to be able to drill and use the bolts/nuts to secure the lip? Thanks!
Do you have to drill? I don't really want to if possible.
Waiting for a brake upgrade video❤
How were you able to reach your hand around to install the nuts and bolts?The underneath looks pretty closed in?
If you install this lip and decide to get something else like infamous aero/aeroflow/sayber/etc - would it be hard to install a new one? I feel like the holes wouldn't line up and since you drilled them it'd make it tough
Looks sick.
They did a great job on the design!
Nice Video
Thanks!!
Don’t forget safety glasses next time
Looks great
He should wear eye 👁️ protection!
Going to get the Varis Arising 2 front bumper once they release it? I believe they just released a picture of it being made on their IG 😮
That's too rich for my blood lol
@@KevinVo haha yeah I'm sure it'll be pricey 😭
Is there an ETA for the Full LED Upgrade Kit to get back in stock? Looking to get one for my hands but saw it was sold out.
Great vid as always!
Should be about another week or so. I may have some spares though so if you message me on IG I can help you.
Looks very nice, but I would run def the other one for sure😅😂.
You like to live dangerously haha I like it!
does it suits to BRZ ZD8 as well?
Love it 😍
It looks good but, would it fit GR 86 2023 special edition 10th anniversary? Please reply & would you provide me with info on how to go about ordering one also door edge guards and lubbers for rear window thank you,
Yes it should fit just fine on any GR86. You can order on the HT Auto website. Not sure about louvers though
Nice lip! What’s your opinion on the latest engine failure that’s making the rounds on the internet? Do you think the engine in the GR86 is reliable?
Whats latest engine failure? Is it the rtv issue or are you talking about something else?
@@raulvenzor5699 there is a new video of a guy on the track with his GR86 and the engine blows.
Hey Kevin is it possible to get auto folding mirrors on usdm gr86? Not really a must have feature but I thought it’d be cool to see if possible.
nice lip
What happened to the Advans? I see that you've moved back to the 17 inch silver face stocky bois.
Sold them for something different! You'll see soon!
Will this fit on a 2017 86 ?
Hey ive just discovered your channel after purchasing a 2022 GR86 and am in need of some help. Do you happen to know if the last gen 86 rear window, not the sides, louver will fit the gen 2s?
I don't believe so.
Kevin did you see another 86 engine blew on track and Toyota wouldn’t cover it? Thoughts? Should we be worried?
I think I saw it mentioned, but really didn't dive too far into it. That's still just one more case versus the large amount of cars out there with no issues currently. I'm not too worried about it.
@@KevinVo thanks a lot for responding 👍🏾. Should have mine in the coming weeks finally
@@KevinVo
Can you please make a video on how we can improve the reliability of these cars? I know you’ve already done 2-3 videos on air-oil separators & dual radiators but maybe make 1 video grouping all them together? Like adding a magnetic oil plug, dual radiator/oil cooler, oil baffle plate, catch can, etc. etc.
Nice. Just bought for mine in uk 🇬🇧. Do you have a link to yours alloys? Look dope.
Those are the OEM 17s that we get on the base model in the US
Those are my stock wheels haha
@@KevinVo oh, ha. we only got the premium edition in uk so black alloys.
So if you fitted 18’s back on clearance would be less of an issue on and off ya drive maybe?
@@ad_182_uk probably not because the tire that comes oem is a 215/35R18 where as with the 17 it’s a 215/45R17. The total diameter is about the same so there would be negligible difference
Need some slip lo!
Hey Kevin
What’s the brand of the lip again?
ht autos gr86 front lip
how long did the lip take to be shipped to your location from the UK?
Not long at all. I want to say 2ish weeks if that?
What do you use to lift up your 86?
czcams.com/video/DJqrO2KuIa4/video.html
Kevin did you sell your wheels?
YUP!
I like it better.
Kev do you have a discount code?
I don't. Sorry 😞
What is the purpose of a lip?
Mostly aesthetics.
Hello guys,
Please can you give me your full e-mail for some request on your carbon fiber parts for gr?
Trying to contact you but can t find the complete mail.
Thanks
Diego
Info@driven.media
Thank you kevin
Am I the only one who thinks lips look better on the BRZ?
That's what's great about modifying cars, everyone has different tastes!
a nah from me .
Nice home depot lip, bruh.
All these lip kits sit too low to the rest of the car and break the visual line.
Bro, 20 bucks of cement and make ur drivey flat 🤷🏻♂️
Affordable & good quality?!? Sign me up 🫡
Im finally caught with all the vids... here to support from now on🫡
Agreed a bit much with the older lip on the car. Plus front end carbon is not for everyone. New lip looks great Kev. Nice touch!