Здравей Купих Varta Sylver Dinamic която НЯМА стикер със BEM кода. Акумулатора НЕ е със АГМ технология, и не знам как да кодифицирам. Има само сериен номер 11 цифри и това е. В този случай, какво трябва да направя?
Ако оригиналният е бил същият ампераж и стартов ток използвай същият код който е в колата но смени последната цифра от серийният номер. Така колата ще разбере че батерията е сменена. Хубаво е ако колата изисква АГМ да и вземеш такъв.
I have problem, i have c6 audi, and changed the battery, from 95ah agm exide to 105 varta agm silver dynamic, but it doesnt have bem code and whit my vcds(16.8.2) i cant long adaptation it
If you do not change it the car will think the battery is 95ah so I think nothing bad will happen. If you do want to take advantage of the extra ah then you will need to find the proper code for 105ah
I think you can skip the coding. Coding was mostly if you have start stop. "if you have Stop Start and the monitor module on your live terminal, you need the car coded to know there's a new battery and it's a different capacity and type. If you don't have any of this, the battery can just be replaced like any other car. Knowing this you can decide which version of Tig you have and whether you do need it coded."
@@bonevchannel I dont have start stop on the car. Thanks for info. I will also buy a vcds. My low beam lights are allsways working on switch 0 when ignition is on. I want to deactive that also.
I had battery issues and my A6 C6 was jump started with another battery. I since replaced it, problem is my MMI is not working. It comes on for a few seconds but then shuts down. Rebooting does not work. Is it a coding issue?
Was the replacement battery the same as the old one? If not the battery needs to be coded, but I do not think it will cause MMI not to work. Still if it needs to be coded, do it and you will find out about the MMI issue 😉
Thank you for posting! Now i know what to do when it's time to replace.
Thanks for the video Bonev. Are you Bulgarian?
My diegard doesn't have that underneath
Здравей
Купих Varta Sylver Dinamic която НЯМА стикер със BEM кода. Акумулатора НЕ е със АГМ технология, и не знам как да кодифицирам. Има само сериен номер 11 цифри и това е. В този случай, какво трябва да направя?
Ако оригиналният е бил същият ампераж и стартов ток използвай същият код който е в колата но смени последната цифра от серийният номер. Така колата ще разбере че батерията е сменена. Хубаво е ако колата изисква АГМ да и вземеш такъв.
I have problem, i have c6 audi, and changed the battery, from 95ah agm exide to 105 varta agm silver dynamic, but it doesnt have bem code and whit my vcds(16.8.2) i cant long adaptation it
If you do not change it the car will think the battery is 95ah so I think nothing bad will happen. If you do want to take advantage of the extra ah then you will need to find the proper code for 105ah
Hi where do you get this vcds do you have to connect to obd port whilst doing battery registration
Hi, VCDS is a software that requires a certain cable also that would connect to the ODB port.
Hello my battery name is different and i dont see name in list, which battery name i should pick?
What is your battery name and capacity?
Good vid, but I don't have the option on my 21.3 VCDS of the pop up after choosing Long adaptation !
Unfortunately it vary from car to car and model to model. What make and model is your car.
2012 Tiguan , am using VCDS 23:1
Have you tried this one: wiki.ross-tech.com/wiki/index.php/Battery_Replacement
In have buy a tiguan 2011 . Noe have a 64 ah battery. I will place new one varta 74 ah. I have not start stopt. Do i also need to code it ?
I think you can skip the coding. Coding was mostly if you have start stop.
"if you have Stop Start and the monitor module on your live terminal, you need the car coded to know there's a new battery and it's a different capacity and type. If you don't have any of this, the battery can just be replaced like any other car. Knowing this you can decide which version of Tig you have and whether you do need it coded."
@@bonevchannel I dont have start stop on the car. Thanks for info. I will also buy a vcds. My low beam lights are allsways working on switch 0 when ignition is on. I want to deactive that also.
Battery aging 99%? Should it be 0.as you just changed a battery?
No it should not be 0. 0% would mean depleted.
I had battery issues and my A6 C6 was jump started with another battery. I since replaced it, problem is my MMI is not working. It comes on for a few seconds but then shuts down. Rebooting does not work. Is it a coding issue?
Was the replacement battery the same as the old one? If not the battery needs to be coded, but I do not think it will cause MMI not to work. Still if it needs to be coded, do it and you will find out about the MMI issue 😉
Same issue here, did you fix it by coding battery?
Hello when i go to can gateway, for me the long adaptation button is gray and i cant click on it. I have vcds 21.9. do you know how to enable it ?
What is your car model and year? Just a first thought- It might not have this module for adaptation at all.
@@bonevchannel golf MK5 2007 😬
@@MrPatch26 that is why you do not have adaptation. Your car does not need it. 😉 just replace with whatever battery you want.
Not everyone has one of those goddamn fucking machines