2004 Volvo Penta 4.3 GL-D - rough idle?

Sdílet
Vložit
  • čas přidán 2. 06. 2017

Komentáře • 25

  • @thomasczartoszewski6378
    @thomasczartoszewski6378 Před 6 lety +1

    Cool👍

  • @booostedtc
    @booostedtc Před 4 lety

    Do you know what cause it

  • @booostedtc
    @booostedtc Před 4 lety

    Does it vibrate like this after its warm up

  • @bryanschaffer566
    @bryanschaffer566 Před 4 lety

    Mine is doing that and also doesn't seem to have the power it once did. How do I fix it? Fuel pump maybe?

    • @aguyandhiscomputer
      @aguyandhiscomputer  Před 4 lety

      I think mine was just from a long winter and being cold when I started it. Runs fine now. Even my mechanic said it runs well.
      Could be the fuel pump. Gotta have it pressure tested.
      I would check/replace these:
      - fuel/water filter
      - spark plugs
      - plug wires
      - cap
      - rotor

    • @bryanschaffer566
      @bryanschaffer566 Před 4 lety +1

      I put new plugs, rotor, cap, fuel filter. The only thing that helps is running sea foam or jb injector cleaner in the tank.

    • @aguyandhiscomputer
      @aguyandhiscomputer  Před 4 lety +1

      @@bryanschaffer566 Thanks for the info. You're probably right that it could be fuel/carb related.

    • @brianmiles698
      @brianmiles698 Před rokem

      Would you buy a Volvo Penta drive again?

    • @dsciarrino3663
      @dsciarrino3663 Před rokem

      ​@@brianmiles698 no

  • @booostedtc
    @booostedtc Před 4 lety

    What fix it ?

    • @aguyandhiscomputer
      @aguyandhiscomputer  Před 4 lety

      It runs smooth and the mechanic says it's all good so I didn't do anything. Maybe the idle speed on the carb needs to be adjusted but not gonna mess with it.

    • @booostedtc
      @booostedtc Před 4 lety

      Can you feel vibration in the floor

    • @aguyandhiscomputer
      @aguyandhiscomputer  Před 4 lety

      @@booostedtc I'd say a little when I'm using muffs on land.
      I think it doesn't like running cold and idles fine when warmed up.

    • @laceyklindt2408
      @laceyklindt2408 Před rokem

      Add heat

  • @booostedtc
    @booostedtc Před 4 lety

    I'm having same issue only at idle and spending a fortune thowing parts at it

    • @aguyandhiscomputer
      @aguyandhiscomputer  Před 4 lety

      Yeah, it's not fun. You've done this stuff?
      - plugs
      - wires
      - cap
      - rotor
      - water/fuel separator
      - adjust the carb
      May have to rebuild the carb.

    • @booostedtc
      @booostedtc Před 4 lety +1

      Done all that and had carb rebuild sill vibration at idle not normal use to can sit a empty coke can on it

    • @Californiacichlids
      @Californiacichlids Před 4 lety +1

      @@booostedtc what was the fix ?

    • @booostedtc
      @booostedtc Před 4 lety

      @@Californiacichlids no fix ive thown 3500 at it replaced everything still has this vibration and its not normal should not be there

    • @Californiacichlids
      @Californiacichlids Před 4 lety +1

      @@booostedtc mine ended up being a gimbal bearing change boat runs great,, the bracket is a movable part its designed that way with a rubber boot,, or else it would be bolted down.