Nice machine ya nabbed there Scheib! 👌🏼. We run a few of the 34hp injected Kohler big blocks in 60” Exmarks with bagger attachments. You’re gonna love all that power💪🏻. Looks to be a very serviceable unit👍🏻. Blessings!
Yeah I have almost had this unit for a year i love it. The one I had previous to this one was a 2013 bad boy CZT Elite it was also a great machine but you always need bigger lol thanks for stopping in Ted.
Scheib. Nice job. Best insurance an owner can by. One more thing I would HIGHLY suggest (maybe you’re dealer mentioned it, maybe not but I bet its in the engine owners manual) is to remove the fan shroud housing. This is the black plastic cover that is over top of the flywheel and cylinders. They are fairly easy to remove. Manufactures realized they better make these easier accessible so this maintenance task gets done. Reason being is to clean the cooling fins. These big air cooled v twins move a lot of air and along with that air is grass and dirt. It accumulates on and in the cooling fins especially on and around the head/ valve train nooks and crannies. This leads to overheating of the head and the eventual drop of a valve guide. Doesn’t matter which make of engine the all do it. I’v done head jobs on all of them. I did see a good idea from new Kawasaki EFI v twin, they incorporated the air filter cover to cover access holes thru the blower housing to get direct access to the head cooling fins. My opinion is these Kawasaki’s are one of the best if not the best lawnmower engine for the past 20 years.
Thanks Garny I will definitely check it out.my dealer didn't mention it. I know I get a lot of leaf debris up in there. I am sure there is dirt, grass and dust in there also. Good looking out bud and thanks for stopping in.
Remove the small cover That has FX 1000 V on it, one bolt and then you can blow out any grass that gets in around the cooling fins.No need to remove the whole engine cover.
I researched many zero turn mowers, ran a few manufacturers and decided upon a Bad Boy. I purchased a 2018 Outlaw Extreme 61 inch deck with the 993cc Vanguard 36 hp motor. This machine is a beast. Love it!!
Holy cow, now that's one serious lawn mower...lol...here I thought you were gonna be hooking up some sort of beverage tank similar to the hard hat....Hahahaha
Nice to see these are fairly easy to service yourself. Any experience with Ferris? I currently have a Ferris IS4500z with 61” deck. Just wondering how the two might compare, I’ve been eye ballin these for a little while now
Nice machine ya nabbed there Scheib! 👌🏼. We run a few of the 34hp injected Kohler big blocks in 60” Exmarks with bagger attachments. You’re gonna love all that power💪🏻. Looks to be a very serviceable unit👍🏻. Blessings!
Yeah I have almost had this unit for a year i love it. The one I had previous to this one was a 2013 bad boy CZT Elite it was also a great machine but you always need bigger lol thanks for stopping in Ted.
Glad you showed how to do the hydrostatic oil change. Now I feel better about doing mine. Thanks bud......
Yeah the hydro oil change isn’t to bad you shouldn’t have a problem.
Scheib. Nice job. Best insurance an owner can by. One more thing I would HIGHLY suggest (maybe you’re dealer mentioned it, maybe not but I bet its in the engine owners manual) is to remove the fan shroud housing. This is the black plastic cover that is over top of the flywheel and cylinders. They are fairly easy to remove. Manufactures realized they better make these easier accessible so this maintenance task gets done. Reason being is to clean the cooling fins. These big air cooled v twins move a lot of air and along with that air is grass and dirt. It accumulates on and in the cooling fins especially on and around the head/ valve train nooks and crannies. This leads to overheating of the head and the eventual drop of a valve guide. Doesn’t matter which make of engine the all do it. I’v done head jobs on all of them. I did see a good idea from new Kawasaki EFI v twin, they incorporated the air filter cover to cover access holes thru the blower housing to get direct access to the head cooling fins. My opinion is these Kawasaki’s are one of the best if not the best lawnmower engine for the past 20 years.
Thanks Garny I will definitely check it out.my dealer didn't mention it. I know I get a lot of leaf debris up in there. I am sure there is dirt, grass and dust in there also. Good looking out bud and thanks for stopping in.
Outside with Scheib it’s a good habit to get into. Check at least annually.
Outside with Scheib :: It’s also an awesome place for little critters to nest in during those long winters😳😬
Remove the small cover That has FX 1000 V on it, one bolt and then you can blow out any grass that gets in around the cooling fins.No need to remove the whole engine cover.
Looks like a nice built mower. I should look into getting one.
Definitely built very well and worth a look if you have a dealer near you.
I researched many zero turn mowers, ran a few manufacturers and decided upon a Bad Boy. I purchased a 2018 Outlaw Extreme 61 inch deck with the 993cc Vanguard 36 hp motor. This machine is a beast. Love it!!
I don't look forward to do maintenance but feel better once it's done.
Yeah take care of your equipment it will take care of you.
Holy cow, now that's one serious lawn mower...lol...here I thought you were gonna be hooking up some sort of beverage tank similar to the hard hat....Hahahaha
Lol not yet we shall see what shenanigans I can come up with this summer 😂😂
I Have the a Mower just like this one. It's a 2020 model. So far so good, That Kawasaki Motor is one Bad ass engine..
Sure is a really nice mower love it thanks for coming by
Great job brother, just bought a Rebel KW 999 cc engine. Thanks for the info.
It is time to get the mower ready. Damn it.
Sorry Tom but it’s inevitable lol
Nice to see these are fairly easy to service yourself. Any experience with Ferris? I currently have a Ferris IS4500z with 61” deck. Just wondering how the two might compare, I’ve been eye ballin these for a little while now
I haven’t run anything but bad boy for the past 10 years.
How much did it cost for this maintenance,? (oil, hydraulic fluid, filters, sparkplugs the whole ball a wax). thanks,
Not much
how many gallons or quarts did you put in each hydrostatic pump?
I believe it’s 1.25 gallons total for both hydros
That's one sexy beast. Imma have to contract you to mow my lawn. And remember what we talk about, Gold digging pranks with your lawn mower...😅😂🤣
lol contract me to mow your 1000 sq ft lawn with my 61 inch mower lol sure thanks for stopping in bud
Thinking about buying one next season appreciate the tips
Just keep feeding it grass lol well worth the money.
Thanks!
You bet!
Nice machine bro heading to jobsite hopefully in 1 hour I will be live streaming chat later.
Yeah she’s a beaut I may be able to check out the live stream
Didnt live stream but are tree cutting guys got us whole maple tree check out some of the videos good crew of guys here
I see these mowers on Craigslist in my area. They look pretty good. Do you have a landscape company?
No but I do mow several properties throughout the year. Best mower I have ever purchased.
@@OutsidewithScheib they sure look cool.
how to put the seat up
how to put the seat down
Lol, you make the lawnmower look and sound sexy!
Thanks Stephanie
Nailed it Lewis when do I get my sticker?!
Thanks
N/P Larry thanks for stopping in.
You didnt take the vent off the hydros
And he didnt loosen the dump valve and purge it right