Slope Deflection Method Problem 1 | Analysis of Frames | By Abhishek Civil Tech

#structuralanalysis #frames #analysis
Slope Deflection Method Problem 1 | Analysis of Frames | By Abhishek Civil Tech
Hello Guys Welcome to my channel,
In this video I have explained one problem in Slope Deflection Method. Watch the video till the end so that you can understand the concept of this method. Slope Deflection method is one of the methods used to analyze a frame. This analysis includes slopes and deflections to solve the equations.
In order to reduce the length of the video I have not explained the procedure of drawing Bending Moment Diagram. So I have made a seperate video on it. In that video I have explained the procedure of drawing Bending Moment Diagram clearly. In that video I have taken same moment values as an example. The procedure of drawing BMD is same for any frame.
This channel is completely about Civil Engineering. I will be uploading videos related to Civil Engineering subjects such as STRUCTURAL ANALYSIS, REINFORECED CONCRETE DESIGN, STEEL STRUCTURES,ESTIMATION AND QUANTITY SURVEYING, STRENGTH OF MATERIALS, ENGINEERING MECHANICS, SURVEYING, FLUID MECHANICS, STEEL STRUCTURES. Please do Subscribe this channel for more videos. Thank You and Keep Supporting.
ALSO CHECK OTHER VIDEOS AND PLAYLISTS IN MY CHANNEL. YOU MIGHT FIND SOME USEFUL CONTENT IN IT.
How to Draw BMD for Frames: • How to Draw Bending Mo...
Introduction to Slope Deflection Method : • Analysis of Frames | I...
-----------------------------------------------------------------------------------------
Cables and Suspension Bridges Playlist :
• Introduction And Formu...
Arches Playlist :
• Introduction to Arches...
Analysis of Frames Playlist :
• Analysis of Frames | I...
Analysis of Indeterminate Trusses Playlist :
• Introduction to Analys...
-----------------------------------------------------------------------------------------
Copyright Notice:-
Please feel free to leave me a notice if you find this upload inappropriate.
Contact me personally if you are against an upload which you may have rights to the content shown in this video
instead of contacting CZcams about a copyright infringement.......Thank You..!

[@Yashu_malviya]

Nice lecture 😊

[@AbhishekCivilTech]

Thanks a lot 😊

[@akhilkumar9368]

very nice explanation sir tq u so much sir

[@AbhishekCivilTech]

Most Welcome

[@Mothernature203]

Excellent sir u r explanation is very well I'm subscribing 😀

[@AbhishekCivilTech]

Thank you so much 🙂

[@chandupunnana1737]

Tqq sir and very nice explanation 👌

[@AbhishekCivilTech]

Thank You Very Much for the Comment

[@durgasigapatla1029]

Super bro

[@AbhishekCivilTech]

Thanks bro

[@shortnotesforce1330]

Excellent sir...sir please do more videos

[@AbhishekCivilTech]

Thank you very much. I will certainly make more videos

[@Abdiannnn]

TQsm sir

[@AbhishekCivilTech]

All the best

[@rakesh.p9099]

Thank you

[@AbhishekCivilTech]

Thanks for watching

[@durgasigapatla6715]

Keep it up bro

[@AbhishekCivilTech]

Sure bro

[@balajivallepu49]

Thank you so much sir 🙏

[@AbhishekCivilTech]

Most welcome

[@vallicreations408]

If there is no load on member CD , in shear condition we have to write Mcd+Mdc /5 or not

[@AbhishekCivilTech]

Yes. Because it is also a column and it is also subjected to sway

[@sajeelbilal3653]

Sir how did you calculated the values of the equations with calculator?

[@AbhishekCivilTech]

In scientific calculator you can solve the equations by entering the values of coefficients

[@mohammadnaseeruddin7654]

This problems structute analysis paper 1 or paper 2 sa 2..???

[@AbhishekCivilTech]

SA-2

[@sivakrishna1333]

Sir, in AB we have two point loads buts u have calculated only one load

[@AbhishekCivilTech]

Yes, We should consider one load only. Because another load is acting on the joint, not on the member AB. If it is acting on the member then we should consider that as well. The load which is acting on the joint does not produce any moment because in first step we assume Joint B as Fixed Support.
Hope your doubt got cleared. Thanks for Watching

[@sakethmudiraj2081]

Bro LCM explain cheyandiii

[@AbhishekCivilTech]

Please don't mind. It increases video duration

[@-ShivaKumar-qf3xd]

7.03 equation Mab value? -96+4EI/5-6EI∆/25

[@AbhishekCivilTech]

Mab is unknown and keep it as equation

[@ajaytete7751]

6EI∆/l² is formula but in AB=10m you took 6EI∆/5 it should be 6EI∆/100

[@AbhishekCivilTech]

I revisited the problem and found nothing wrong in it. All the values were substituted as per the formula. If you still not able to get clarity, please feel free to comment again with your doubt.

[@ajaytete7751]

@@AbhishekCivilTech ok

[@chandusback-up5783]

Calci lo Ela bro 4 unnay ga and =- 1200 undi look @ 20:22

[@AbhishekCivilTech]

Take that 72 towards right side and add -1200 and -72. It will become -1272. Now equation will be reduced to 3 terms on left hand side. Using Mode option in calci select equation and then select type of equation as (ax +by + cz =d) and enter coefficients of all equations and solve it. Thanks for Watching

[@sarcastictrippy]

Bro how did you solved those 3 equations can you explain it

[@AbhishekCivilTech]

If you want to solve manually, you can go for matrix methods like Matrix Inversion Method, Gauss Jordan Method, Cramers Method.
or
You can use scientific calculator and using mode option, selecting appropriate format of equation like ax+by+cz=d. You enter coefficient values. I will make a video soon you will get more clarity.
Thanks for watching

[@thaseenshaik9137]

Bro ne number ivvu bro ....

[@AbhishekCivilTech]

Sorry bro Due to some reasons I cant give number. Please message me in instagram. (abhishek_civil_tech)