Hello, very interesting video, this one by far is the best that I have seen and explains everything, in addition to that I like to advise that the oil crankcase ventilator has a big round oil ring on top and if you can try to change this to prevent further problems down the line, 👋👌👍, Toledo heavy truck diagnostics.
Hey question, is that whole assembly supposed to be changed at a certain point? Or if there is a leak you can just fix it by replacing the gasket or o rings?
Seattle Washington. Please subscribe share and like my videos this will help me grow my channel and give me more time to make more videos like this. Thank you.
I have a Volvo vnl 670 2016 and im having a problem. Poor acceleration when start and rpm stay low. Everytime the truck shift it makes an air release noise. What could it be?
Sounds like a clamp loose on your turbo hoses or cracked charge aircooler...both of these sounds like whisking sound and will cause loss in power when you accelerate or in a hard pull
Volkswagen TDI guy here. Looking for alternative vents. Awesome.
Way to go!😉
Damn bro u the man!!!! Excellent video!!!! U get to the point at 100 percent with no bull!! Thanks alot!!!!
Thank you!
Hello, very interesting video, this one by far is the best that I have seen and explains everything, in addition to that I like to advise that the oil crankcase ventilator has a big round oil ring on top and if you can try to change this to prevent further problems down the line, 👋👌👍, Toledo heavy truck diagnostics.
Thank you! 👍👍👍
Excellent video. Really nice that there is no music. Excellent job.
Thank you! I’m glad that I can help in someway.
I need to do the same on my volvo700hp its leaking oil from the same place , thanks for the video man very well explained.
Thank you!
I’m about to perform the same task on my Mack. From what I can tell your engine looks the same as my mp8.
Very clean step by step.
Thank you!
Thank you, very informative and helpful. Great job!
You welcome.
Thank you for the comments I really appreciate them.😀
Great job!!! I need to get this done
Thank YOU!
You made it look easy.
Thank you!
It is easy!
awesome man! thanks!
Thank you!
Super video, right nice you made it super easy.❤
Thank you!❤️
Subscribe share and like!
Check my other videos.
Thank you , it is very helpful❤
Thank you!
Awesome . Thank you
Thank you
Nice content. I subscribed
Thank you
Good job thank you brother
Thank you
Thank you just did my. Very helpful video 👍
Thank you
Did you buy the $600 oem Volvo separator or an aftermarket one for
You are good men
Thank you
Thank you sir
You welcome!
Remove accessory belt. Unbolt AC compressor. Move pipe out of way. Unbolt CCV. Clean mounting surface. Install new gasket in CCV. Reinstall CCV. Done.
Thank you
Good job
Thank you!
Subscribe share and like!
Hey question, is that whole assembly supposed to be changed at a certain point? Or if there is a leak you can just fix it by replacing the gasket or o rings?
Good question.
If you take it apart and clean it then you don’t have to replace it. There is nothing to break inside unless bad quality parts.
👍🏻
Thank you
👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻🎯
Thank you!
What’s directions the gases or oil flows?
I have probleme the bolt sort rear head comme round how i can take out is I cout head can teke out and after teke out bolt
How did you solve the problem?
Does this fix the engine crankcase ventilation hose disconnection problem?
No. Fixes just the oil leak.
What you use to clean the oil
On the crancase it self not the body
Brake parts cleaner.
amzn.to/3X0HHME
Do you need to empty the oil to do this job
No
Thanks you for the reply
What’s the part number for the gasket ?
20532891
$20 at the dealership
Heeei Where you get the gasket?
At the dealership was about $20
Mechanic says you can clean the oil spiner, to not buy another one
Yes you can
Where is your location
Seattle Washington. Please subscribe share and like my videos this will help me grow my channel and give me more time to make more videos like this. Thank you.
I have a Volvo vnl 670 2016 and im having a problem. Poor acceleration when start and rpm stay low. Everytime the truck shift it makes an air release noise. What could it be?
So many things can go wrong 🤪 best way to find out hook it up to a computer.
Did you find out what was your issue?
Sounds like a clamp loose on your turbo hoses or cracked charge aircooler...both of these sounds like whisking sound and will cause loss in power when you accelerate or in a hard pull
Man you playing around
Thank you! I’m trying.