Brother R650 4th axis production viewing from the operators side.
Vložit
- čas přidán 8. 09. 2024
- Not much to say about this. The fixture is from my old machine which had only one table and 4th so I would swap fixtures between cycles so I could swap parts while the machine was making them. The tailstock is pneumatic to make swapping the fixtures easy but now it just applies a nice constant pressure. Tailstocks are good for 754 lbs at 60 psi and is set to 35 psi for this work. The main fixture upgrade will be to replace it with a 4 sided dual station vise so I can hold 8 parts a cycle. This is another product I want to get into production before the end of the year, not just to sell but I really want them for my own use.