How to Calibrate the ZK 4KX Module DC Buck Boost Converter CC CV 30V 4A
Vložit
- čas přidán 15. 07. 2024
- @radal05
Module DC Buck Boost Converter CC CV 30V 4A with LED Display - ZK-4KX - Blue spesifikasi manual datasheet
Jual ZK-4KX ZK4KX DC DC Step Up Down Buck Boost
Link pembelian :
1. ZK 4KX Module
tokopedia.link/kD41GPKckxb
2. box plastik hitam x2 11.5x5.5x4
tokopedia.link/oAfEnfpaxyb
3. Cek ZK-4KX ZK4KX DC-DC Buck Boost Converter CC CV 0.5-30V 4A - AIFRobotic dengan harga Rp120.000. Dapatkan di Shopee sekarang! shope.ee/AKAcYcyIKW?share_cha...
*Varian ZK-4KX versi 4A
Tegangan Input: 5.0-30v
Tegangan Output: 0.5-30v
Output saat ini: stabil di 3A untuk waktu yang lama, Bisa 4A dengan tambahan heatsink
*Varian ZK-5KX versi 5A
Tegangan Input: 6.0-36V
Tegangan Output: 0.6-36V
Arus Output: 5A maks
Daya keluaran: 80W
Method of Use:
1. Switch display parameters -- in the normal interface, press SW to switch the display below the display screen, and switch the display content between current A power W capacity Ah time h.Long press SW button to switch the uplink display on the display screen and switch the display content between input voltage IN output voltage OUT.
2. Set output voltage -- press U/I button in the normal interface to enter the interface of setting voltage constant current.It can be seen that a certain digit of the output voltage value is flashing. Rotate the encoder left and right to adjust the major and minor.Short press the rotary encoder to choose which bit of output voltage to set.After setting, press U/I button 2 times to return to the normal interface.Or automatically return to the normal interface after stopping operation for 10s.
3. Set constant current value (that is, the maximum current value allowed to output by the module) -- press U/I button in the normal interface to enter the setting voltage constant current interface.Then press U/I button and switch to setting constant current value. You can see a bit of the setting constant current value flashing. Rotate the rotary encoder left and right to adjust the major and minor.Short press the rotary encoder to choose which bit to set the constant current value.After setting, press U/I to exit the setting voltage constant current interface and return to the normal interface.Or automatically return to the normal interface after stopping operation for 10s.
4. Set the default on/off state of module power-on -- long press U/I in the normal interface to enter the parameter setting interface.You can see that it shows 'OPEN OFF' or 'OPEN ON'. 'OPEN OFF' means the output is turned OFF by default when power is ON, and 'OPEN ON' means the output is turned ON by default when power is ON.Long press rotate encoder to switch two states.After setting, long press U/I to return to the normal interface.
5. Setting of protection parameters on state and threshold -- long press U/I to enter the parameter setting interface in the normal interface.Press SW until the protection you want appears.LUP -- undervoltage protection threshold;OUP -- overvoltage protection threshold;OCP -- overcurrent protection threshold;OPP -- over power protection threshold;OAP -- ultra-capacity protection threshold;OHP timeout protection threshold;OTP -- overtemperature protection threshold.Short press rotate encoder to select which bit you want to set the protection parameter.Long press the rotary encoder to set the protection parameters on or off (only timeout protection and supercapacity protection can be set to turn on/off, and other protection parameters are turned on by default.).Rotate the encoder left and right to make the parameters bigger and smaller.After setting, long press U/I to return to the normal interface.
6. Calibration voltage and current -- press U/I button to enter the parameter setting interface under normal interface.Press SW until a parameter interface with CAL appears.The calibration input voltage interface with the symbol CAL+IN+V;The calibration output voltage interface with the symbol CAL+OUT+V;The calibration output current interface with the symbol CAL+OUT+A.Rotate the encoder left and right to adjust the size of parameters.After the adjustment is completed, long press the rotary encoder to confirm the adjustment is completed, and the parameter value is no longer flashing.Long press U/I to return to the normal interface.
00:00 Radal05
00:12 Memberi box modul xk-4kx
00:44 Cara kalibrasi - Věda a technologie
timakasih gara2 ini video saya berhasil, kirain modul nya rusak
sama-sama
Yupz, memang seperti itu bro seting Kalibrasi'y. Saya pertama2 sempat bingung kenapa tiap kalibrasi selalu gagal/tidak akurat, ternyata patokannya ketika seting kalibrasi input tegangan harus lebih dr 12V dan arus di atas 1A baru bisa berhasil heehehe..😅
Untuk save setingan memang seperti itu, tp saya tambah reset/on off kembali input power supply'y.
Sudah memang seperti itu.
salam sehat salam sukses panjang umur murah rezqi cianjur hadir menyimak
Wa 'alaikum salaam ... salam sehat juga ...
Amin... 🙏🙏🙏
Yang ini desain nya bagus
Caramba o único vídeo que eu encontrei de calibração deste módulo muito obrigado amigo.
Divirta-se lendo. esperançosamente útil
Keren bang videonya
Thanks Bro ... 🙏🙏🙏
Can it be converted to 10 amps or more ?
salam bro..kalau adaptor lektop di letakan di dalam kira2 brp ukuran kotakny
Keren bang tampilanya..kira2 bisa diupgrade g ya Ampernya..
saya ada modul voltmeter dengan ic AIP1628,disitu ada 5 kabel keluar warnanya sama semua,coba saya cek jalur kabel disitu pada pinout ic ada keterangan kabel1= vcc/suply,kabel2=di/o,kabel3=clk,kabel4=stb,kabel5=ground,.itu artinya ap saya gk faham,mohon pencerahannya,maaf baru belajar,,,
Punya saya sepertinya ocp nya bermasalah, pd saat tidak ada beban malah ada muncul arus berjalan 😢
Değerli üstad, benim zk4kx Modülüm 19v laptop güç adaptörü ile çalışıyor ancak en fazla 7.72 volt çıkış veriyor, bu sorunumu nasıl cozebilirim bana yardımcı olabilir misiniz, teşekkür ederim
🙏🙏🙏
@@Radal05zk4kx, I was using a 19v adapter for this device, now I am adjusting the voltage of my device, it does not go over 7 volts, what is the problem, can you help?
salam dr malaysia mas radal....mau nanya,module ini boleh digunakan utk mbr apa ga ya...mohon mas radal dpt bantu saya🙏🙏🙏
selama arus maksimum sekitar 3A... bisa
@@Radal05 terima kasih🙏🙏🙏
bedanya ocp dan opp itu apq ya bang?
sy pake buat test laptop acer jadul ,saat laptop dinyalakan muncul peringatan OPP
Nanti saya buat videonya
Bang kalo kalibrasi arus...mksud nya .beban nya harus lebih 1A?
Pertanyaan ini saya jadikan konten, siang ini alan saya upload/// thanks Bro.,,,