KTM Duke 125/390 No Db Killer vs Stock Exhaust - And my thoughts on it!
Vložit
- čas přidán 27. 06. 2024
- Hi! i recently removed the db killer from my ktm duke 125 original exhaust. This is a comparison between the db killer in and out, including my thoughts on it, hope you enjoy!
The shop i talked about:
www.boonstraparts.com/
A great video if you want to remove your db killer from your duke! • Exhaust Baffle DB Kill...
Chapters:
0:00 Sound comparison
0:38 Fly by
1:15 My thoughts
2:16 How i did it
4:00 My thoughts again
![KTM DUKE 125 2020 - ride to school [Akrapovic no Db Killer] 2k60FPS](http://i.ytimg.com/vi/aEMob1Fef_Q/mqdefault.jpg)
![KTM DUKE 125 2020 - ride to school [Akrapovic no Db Killer] 2k60FPS](/img/tr.png)
![KTM Duke 125 - Ride to school [NO DB]](http://i.ytimg.com/vi/VOnrPNlqTFs/mqdefault.jpg)
Very satisfying sounds from your exhaust, i enjoy the video. Keep it up our juicer 😇🥴
glad you enjoyed it!
Hey very good video, altough you wrote "whole" as "hole"
Hey! Thanks for your response! Will try to spell correct in the next one!
@@rofletrides Sounds Good!
This is very epic, i want to drill mine out altdoe i dont have a duke. Very profesional
Thank you! Yeah it's a quick way to add a lot of personality to a bike!
it will affect the bike engine or not?
I've heard some specolations that it might have a small impact on the valves due to the lack of back pressure, however i haven't noticed anything and other people that have debaffeld their bikes haven't noticed any damages either. But it's hard to say, if you tune it afterwards it will be completely fine, but since this is such a small mod, I dont find it necessary. Hope it helps!
Undrar vad besiktningen säger om detta. Hur pass mycket påverkar det ljudnivån utöver tonen på ljudet?
Jag vet inte vad besiktningen kommer säga, jag har ett annat orginal rör med db killern i som jag har bessat med. Dock blir det inte super mycket högre, mest att den låter mörkare. Men den blir ändå lite högre.
Den låter inte mer än vad är tillåtet generellt för en motorcykel, men man får inte modifiera avgasröret/motorn så den låter mer än 5db mer än vad det står i registreringsbeviset. Jag vet tyvärr inte om det blir 5db högre än orginal. Men så värst mycket låter den inte, så borde kanske gå bra.
Hoppas det hjälper! Kan senare försöka mäta ljudnivån om jag fixar en db mätare!
Intressant. Visste inte om den 5 db regeln. :)
Nej den är lite gömd bland alla andra regler :). Så för alla motorcyklar som har en angiven ljudnivå i registret gäller 5db tilläg som max. Men! För äldre, amatörbyggda eller impoterade hojar utan denna ljudnivå i registret gäller 103db, 0,5 meter ifrån röret. Finns en bra artikel om sånt på svmc som heter ljud eller buller. Kan rekomendera den👍
Här: www.svmc.se/smc/trafik-och-politik/motorcykeln/ljud_eller_buller_/
But what of you have a yzf instead?
ktm > yamaha
Can I put it back on?
No, if you drill it there is no easy way to put it back on. You most likely have to open the silencer up and weld it back on.
@@rofletrides thank you for the fast response. Was thinking of doing it but in 3 months I have technical or whatever it's called for the bike and I'm not sure if it can pass without the db killer
Yea okey no problem! It's hard to say if it will pass. I bought a used silencer from a scrapyard for around 50$ to have a spare silencer with the dB killer in for the inspection.
@@rofletrides that sucks man rly wanted to remove it cause I hate the stock sound with db
Yea :/