Thank you thank you thank you! This old lady with bad knees has been trying for 2 days to get mine going again after I changed battery. Got up on step ladder and couldn't read small print. Out of desperation I googled my garage door opener brand and I was lead here. Followed instructions and voila it works. Getting in and out of car with my replaced left knee healing to manually open and close garage door was getting old. So thank you again kind sir!
WOW. This is AMAZING. We seriously sit in front of the garage and press the remote 10-50 times before it would finally go up or down. Just followed your guide and up and down it goes! Thank you!
I cannot thank you enough... Moved into a new house and only one of openers were working.. My wife nagging me to get new ones, went online to buy them and then out of curiosity found this video. You saved me time and money THANK YOU!!!!!!!
Thank you so much for posting this video!! I lost the manual and was at a loss at how to reprogram my remote when I changed the key code. I didn't realize it was that simple! Thanks again!!!
Thanks....other videos did not show all parts involved in programming and yours did. I"m a visual learner and your video allowed me to do what I needed to do!!
Thank you so much for this video. I've been at it for three months to make this happen. I've ask the neighbors, my dad and nothing. I saw this video last night. My garage door opener is now working in less then a minute. Thank you again. GOD Bless you!!!
Thank you! Worked like a charm. We've been doing some home remodeling so our garage was full of supplies for that remodel and we parked on the driveway. Haven't used the opener in about a year. Winter is coming so we wanted to start putting the car back in the garage but the garage remote didn't work. It does now!
Thanks so much for a very SIMPLE solution to fixing my remote. I have the same model remote and door opener you have in your video. For some reason my remote suddenly stopped working, and after changing the battery, it still didn't work. Found your video, followed your directions, and it WORKED! Thanks so much!
I read the instruction manual that came with the remote and followed it carefully... 5 times. Then I turned to the internet. The manual is completely different to the instructions you gave me. Odd but it's working now 🙌🙌🙌
Thanks so much for sharing your knowledge! I actually called a garage door company for instructions and they wanted to send out a tec for $119 service charge. All it took was watching your video, which I chose because it was less than a minute and a half. That's about how long it took to get the job done. You're the best!
U are a lifesaver!!! The directions that came with the remote was bunk.. i watched ur clip and on 1:38 minutes my garage door was resurrected from a a deep deep 7 day COMA!! THANKS BRUTHA... CHEERS
Very simple process as you indicated, however, the part when you mention the green light coming on after pushing the red button on the garage door opener saved me a lot of time, because, it didn't come on the first few times I tried it. After watching your video, I reprogrammed all three of my remotes within issue. Thank you.
Another thank you, incoming! My son changed the light on my garage door opener and inadvertently reset my remotes. I thought the batteries had gone dead and it took a few days for me to track down some replacements. Imagine my surprise when the new batteries didn't bring my remotes back to life. We get pretty spoiled by these things so getting in and out of the car to punch the key pad every time I left or came home was starting to really annoy me. Anyway, I decided to find a video that might help me in case i was putting the new battery in wrong or something. Well, voila! Your video helped me figure out that there was nothing wrong with my remotes that a simple re-programming couldn't cure. Thanks for posting this very helpful video!
One of buttons didn't work well on my remote so I switched the operation to another one of the three available. Couldn't figure out how to program till I saw this video. Great tutorial, simple to program. Took less than 10 seconds. Thanks.
Thank you for your instructions. I found two extra remotes that I can use in other vehicles and found your video to be just what I was looking for! Great Job!!!
High 5! Changed the outdoor keyless entry pad and then had to change the car remotes too. I have the same garage door opener so this was great to get this how to video to help me out.
It worked for me. Thanks so much!!! That's truly amazing!!! I did not think it could be that easy and that fast before watching this video. I am so glad that I have searched via Google and did it through the help of this video. You are awesome!!! and this video is truly a god send! You have not only saved us all a lot of time from searching for an unnecessary universal remote control, reading/figuring out to programing the universal remote control, but also saved us from buying it to incurring the unnecessary expense, when the program or reprogram in this video simplify the whole works that any one can do it if one is willing to find the most efficient way for it to work. Thank god for your video!!! Especially the first one I watched that simplify the whole scope of fixing.
I have the same garage door opener and remote. This is NOT how the owner's manual says to do it. It is also NOT how three other CZcams videos (by garage door opener "professionals") say to do it. After struggling with these off and on for months, and finally giving up, today, for the first time in two years, ALL of my garage door opener remotes now work, and they all work on both doors! I can open either door from inside either car, or from inside the house! It took all of two minutes. THANK YOU SO MUCH for posting this. There is nothing worse than having to get out of the car in Michigan when it's -20*F to open the freaking garage door. You just made my winter! :-)
I have the same story, but this still didn't work for me....Have two Craftsmans one works one doesn't...both were working fine, then one quit! Pissin me off!
James Salango 1. Have your remote handy. 2. Push the big red button on the back of the opener. 3. Push the button on the remote within a few seconds. The light on the opener flashes and you're done. You can synch several remotes to each opener.
Thank you!!! You're awesome!!! Can't believe they had a video on how to re-program a 2002 garage door opener!!! Going to try it now. You R a Rock Srar!!!!!
My remote just went out this afternoon! Replace the coin battery did nothing. With your directions, it's back working again. I had never needed to use that button in the 17 years we've had the opener. I also replaced one of the two 60w bulbs -- it had burned out. Thanks for the tip! 👍
Thank you. I found one in an abandon car at work and have had it in my tool box for years. My wife lost hers and I put in a new battery and it works perfect.
Thank you, it was perfect! For a couple of days I went crazy following the directions printed on the side of the red button, but it said "press and hold" which did not work. Now following your directions it was a simple as 1, 2, 3.
Thank you. Rather than waiting on the incompetent rental agency to send a guy out to do this (coming into my house while I'm not home in order to do it, which I don't like), I did it myself in two seconds thanks to this.
Thank you so much for this helpful video! Now that I can finally open my garage door from my car with my new replacement remote, I feel like I’m living in the lap of luxury!
I know the feeling. My remote died and my new was came with vague head scratching instructions and now it's almost as if I walked back into the 21st century.
Thanks bro. 7 years later and still helping.
Thank you thank you thank you! This old lady with bad knees has been trying for 2 days to get mine going again after I changed battery. Got up on step ladder and couldn't read small print. Out of desperation I googled my garage door opener brand and I was lead here. Followed instructions and voila it works. Getting in and out of car with my replaced left knee healing to manually open and close garage door was getting old. So thank you again kind sir!
Glad this helped you, take care!
WOW. This is AMAZING. We seriously sit in front of the garage and press the remote 10-50 times before it would finally go up or down. Just followed your guide and up and down it goes! Thank you!
I cannot thank you enough... Moved into a new house and only one of openers were working.. My wife nagging me to get new ones, went online to buy them and then out of curiosity found this video. You saved me time and money THANK YOU!!!!!!!
Thank you so much for posting this video!! I lost the manual and was at a loss at how to reprogram my remote when I changed the key code. I didn't realize it was that simple! Thanks again!!!
Thanks....other videos did not show all parts involved in programming and yours did. I"m a visual learner and your video allowed me to do what I needed to do!!
Your the man after all these years this thing is still kicking! Thank you.
Thank you so much for this video. I've been at it for three months to make this happen. I've ask the neighbors, my dad and nothing. I saw this video last night. My garage door opener is now working in less then a minute. Thank you again. GOD Bless you!!!
Awesome, glad this helped you!
Thank you! Worked like a charm. We've been doing some home remodeling so our garage was full of supplies for that remodel and we parked on the driveway. Haven't used the opener in about a year. Winter is coming so we wanted to start putting the car back in the garage but the garage remote didn't work. It does now!
Thanks so much for a very SIMPLE solution to fixing my remote. I have the same model remote and door opener you have in your video. For some reason my remote suddenly stopped working, and after changing the battery, it still didn't work. Found your video, followed your directions, and it WORKED! Thanks so much!
I read the instruction manual that came with the remote and followed it carefully... 5 times. Then I turned to the internet. The manual is completely different to the instructions you gave me. Odd but it's working now 🙌🙌🙌
Thanks so much for sharing your knowledge! I actually called a garage door company for instructions and they wanted to send out a tec for $119 service charge. All it took was watching your video, which I chose because it was less than a minute and a half. That's about how long it took to get the job done. You're the best!
U are a lifesaver!!! The directions that came with the remote was bunk.. i watched ur clip and on 1:38 minutes my garage door was resurrected from a a deep deep 7 day COMA!! THANKS BRUTHA... CHEERS
Very simple process as you indicated, however, the part when you mention the green light coming on after pushing the red button on the garage door opener saved me a lot of time, because, it didn't come on the first few times I tried it. After watching your video, I reprogrammed all three of my remotes within issue. Thank you.
Yes...success!!! I literally spent two days trying to figure out the buttons and instructions that came with my new remotes. Thanks so much!
Another thank you, incoming! My son changed the light on my garage door opener and inadvertently reset my remotes. I thought the batteries had gone dead and it took a few days for me to track down some replacements. Imagine my surprise when the new batteries didn't bring my remotes back to life. We get pretty spoiled by these things so getting in and out of the car to punch the key pad every time I left or came home was starting to really annoy me. Anyway, I decided to find a video that might help me in case i was putting the new battery in wrong or something. Well, voila! Your video helped me figure out that there was nothing wrong with my remotes that a simple re-programming couldn't cure. Thanks for posting this very helpful video!
Easy and direct.. thank you! CZcams is definitely the ultimate owners manual! Nicely done!
One of buttons didn't work well on my remote so I switched the operation to another one of the three available. Couldn't figure out how to program till I saw this video. Great tutorial, simple to program. Took less than 10 seconds. Thanks.
Thank you for your instructions. I found two extra remotes that I can use in other vehicles and found your video to be just what I was looking for! Great Job!!!
Thank you SO much. Your video made this easy! Both remotes had stopped working when I tried to program a new keypad. Simple and GREAT video!
Thank you for posting this. As others have said, the directions included with the product do not work, but these directions worked for me.
Thank you. This was very helpful. Thanks to your help, I took care of the remote right in time, before the winter weather
Thanks so much. Just moved to a new house and needed to change everything. You're my hero.
High 5! Changed the outdoor keyless entry pad and then had to change the car remotes too. I have the same garage door opener so this was great to get this how to video to help me out.
Make sure when you replace the battery the positive side is down. Great video. It helped a lot!
It worked for me. Thanks so much!!! That's truly amazing!!! I did not think it could be that easy and that fast before watching this video. I am so glad that I have searched via Google and did it through the help of this video. You are awesome!!! and this video is truly a god send! You have not only saved us all a lot of time from searching for an unnecessary universal remote control, reading/figuring out to programing the universal remote control, but also saved us from buying it to incurring the unnecessary expense, when the program or reprogram in this video simplify the whole works that any one can do it if one is willing to find the most efficient way for it to work. Thank god for your video!!! Especially the first one I watched that simplify the whole scope of fixing.
Thanks for your awesome comment! I'm glad this helped so you were able to save money from having to call someone or replace it. Take care!
I have the same garage door opener and remote. This is NOT how the owner's manual says to do it. It is also NOT how three other CZcams videos (by garage door opener "professionals") say to do it. After struggling with these off and on for months, and finally giving up, today, for the first time in two years, ALL of my garage door opener remotes now work, and they all work on both doors! I can open either door from inside either car, or from inside the house!
It took all of two minutes.
THANK YOU SO MUCH for posting this.
There is nothing worse than having to get out of the car in Michigan when it's -20*F to open the freaking garage door. You just made my winter!
:-)
Thanks for the great comment! I'm glad this finally worked for you!
Yes, I agree, too, I am in Michigan as well.
Hi there I’m home now I’ll call you
I have the same story, but this still didn't work for me....Have two Craftsmans one works one doesn't...both were working fine, then one quit! Pissin me off!
James Salango
1. Have your remote handy.
2. Push the big red button on the back of the opener.
3. Push the button on the remote within a few seconds.
The light on the opener flashes and you're done.
You can synch several remotes to each opener.
This video was soooo easy to follow. The instructions on the opener itself were confusing. Thanks!
Thank you!!! You're awesome!!! Can't believe they had a video on how to re-program a 2002 garage door opener!!! Going to try it now. You R a Rock Srar!!!!!
Thanks! This was a huge help and it saved me a lot of hassle. Thanks for making and sharing it.
You just saved me $100, I love this. Thank you for the simple instructions.
Great, took me less than a minute. It's way better than another video I looked at.
Thanks.
Thank you times a million. I was ready to chuck it until I listened to your video. Both old and new remotes now work perfectly.
Thanks a lot it worked for me too thanksX10.
Thank you so much for teaching me to program my remote control, it's very easy with your help.
My remote just went out this afternoon! Replace the coin battery did nothing. With your directions, it's back working again. I had never needed to use that button in the 17 years we've had the opener. I also replaced one of the two 60w bulbs -- it had burned out. Thanks for the tip! 👍
Thank you. I found one in an abandon car at work and have had it in my tool box for years. My wife lost hers and I put in a new battery and it works perfect.
Thank you for this helpful video and for keeping it up on the internet.
You made my mom happy as a clam at high tide. Thank you!
Thanks for posting the video. Straight and to the point. 👍
Probably the most useful vid on CZcams. Thanks.
Thanks for your video. It took all of 2 minutes from start to finish!
Man, you rock! Saved me time and probably money too! Thanks so much for the post!
Thank you for showing this simple procedure.
Thank you! Worked like a charm. Appreciate you putting up this video :)
Dude your the best didn't have a clue and watched you and did the same and I'm back in business, thanks
Thanks man! Been fighting this for a long time. Found your video and Bingo!
Quick, easy AND accurate!! Thanks so much!
Thank you for sharing!!! the world needs more of you :)
Thanks, it worked !
I bought my first home last month and the instructions on the main unit are useless. Your video helped.
Great video. Never thought it would be that easy!
thanks for the video. watched yesterday. helped me out!
Quick , easy and simple. Thank you very much
Perfectly explained fix!
Thank you!
Thank you, it was perfect!
For a couple of days I went crazy following the directions printed on the side of the red button, but it
said "press and hold" which did not work. Now following your directions it was a simple as 1, 2, 3.
WOW. thank you, worked perfect on 1st attempt. very easy explanation.
I love short videos that do the job.
THANK YOU SO MUCH!!! I just could not figure it out and this was so simple! Hurrah!!!
Thank you very much for the helpful tips. Saved me a lot of headaches
simple and quick. thanks. way different than what's printed on the opener.
Exactly the info we needed. Thank you!
Thank you so much! You saved me a lot of time and aggravation, trying to figure this damn thing out.
Worked great the 1st time. Nice clear instructions.
Thank you for posting this! So helpful.
Thanks, I just followed your instructions, it worked!
OMG!! Was it this easy?? Thanks bro. Now I believe that "Knowledge is power"
Thank you so much for this information. It was indeed helpful.
great video all these years I didnt know you had to reprogram
Thanks so much. The fix worked perfectly and you saved me from buying a new one off the internet :)
Worked great for me using a new chamberlain remote. Thanks!
Thanks my wife almost killed me ..you're a life saver
Thank you for a really great video. It worked perfectly.
Oh my Gosh!! Thank You so much for this Tutorial....God Bless you!!! 😊
Very nice and clear instructions. Thanks
Thank you for this video. It was direct and the solution was Fast.
Dude, this is so cool - nice job!
perfect video for when I needed it. thanks.
Thanks a ton!!! it worked. Thank you for the help!
Thanks so much. It's always easier with directions :)
Thanks for the direct and directions.
Thank you so much for your video. The instruction manual made it appear more complicated that it is.
Worked perfectly! Thank you!
Thank you so much. I had to redo a current one when I set up a new one for me!
Thanks friend! Really great and useful video! I fixed mine!
Tremendously helpful, thank you!!!
Thank you so much ! Extremely helpful.
Thanks so much! Such a simple fix.
Thank you. Rather than waiting on the incompetent rental agency to send a guy out to do this (coming into my house while I'm not home in order to do it, which I don't like), I did it myself in two seconds thanks to this.
Thank you, easy and simple.
Thank you! Just followed these directions and voila!!
thank you from the bottom of my heart
It took longer to watch the video than to program the remote.
Well done. Thank you..
Thank you!! This information helped me.
Thank you for sharing.Very helpful.
Thanks!!!! very clear and simply procedure...
It was that easy 😂😂😂 my mom been asking me to program it, I just did it lol. Thanks
Thank you! I could NOT program the thing on my own. It only took a few seconds - thanks to you!!!
Thanks! After reading and repeating the instructions on the unit multiple times, I turned to CZcams and fixed it in 2 seconds! Thank you thank you!!
Awesome glad it helped!
ya i did the same thing nothing at all what the instructions said..way to easy thanks for uploading this vid lol
Dude, you're the man, thanks for saving me some cash!
Thank you so much for this helpful video! Now that I can finally open my garage door from my car with my new replacement remote, I feel like I’m living in the lap of luxury!
I know the feeling. My remote died and my new was came with vague head scratching instructions and now it's almost as if I walked back into the 21st century.
Thank you for this. it saved me 100 bucks