Flashing Lights Error Code for Canon Pro 100 Printer
Vložit
- čas přidán 21. 08. 2024
- Flashing Lights Error Code Diagnostics: ugp01.c-ij.com...
In my case I had a bad power cable. Oddly it still provided power, but apparently not enough. Hopefully this helps you sort out your Pro 100 issues.
Omg THANK YOU!! I have been fiddling with this dang thing for an hour and all I had to do was swap out the cord and it turned on just fine 😂
Oooh this was my problem. glad I didn't go down a rabbit hole. Thank you!
Had the same flashing as you did, I unplugged it from the actual printer plugged it back making sure it was tight, It worked! Thanks
I did the same thing. Unplugged from back of computer replaced and it started up and pushed out a blank page. Yellow light stopped flashing. Power light and blue wifi light stayed on.
Life saver I tell you, I was hurting my head for day and even bought a new Printhead because it was saying that it was a B200 error , only to be just a back power cable.
Had the same code, unplugged in the back and turned the plug the other way and it worked. No idea why that would generate an error, but thanks!
Fixed my problem thanks. I flipped my power cord 180 degrees and it's responsive!
Yes same problem!! Wow, so thankful for your video. Almost threw it out. 😆
Thanks for this! For me, turning around the plug of the cable worked....so it was definitely the cable as well.
Amazing! Thanks for the video. I had the same error, alternating light flashing 10 times. I swapped the power cable with another one and problem solved. Thanks again.
Thank you so much for the video. I had the same error and switching out the power cord fixed it! I appreciate your help.
I am happy to report that your video has saved me. Thanks. I had the exact same problem and swapping the cable was all I needed.
Thanks so much for this video. I was finally able to figure out what my pattern of flashing lights meant and fixed my Pro-100. Now, I can return the replacement printer I bought😊👍🏾👍🏾
Thank you for this video. I had the same flashing light issue when turning the printer on for the first time. Rechecking the power cable connections worked for me!
Thank you is right! I removed the cord from the printer and reinserted it the other way (top to bottom). Amazing!
thanks for your video: yes I do have a code I can not figure out T. Three flashes. a) Paper output tray is open b) Feed cover slot is closed c) I am not printing on a printable disk. So it has to be a paper jam mode. Nothing is really jammed but a 5 x 7 paper will not advance. I can easily pull it out from the feed but this cycle repeats itself.
Did you find a solution? My printer is also flashing 3 times and I have nooo glue why :( or what I should do.
@@printrovert6276 With 5 x7 paper it does not work. Canon support worthless. No answer from the guy on this Tube video. You got any suggestions??
Switching polarity of the cord worked for me.
thanks for your comment, my printer turned on. such a stupid issue.
Same issue, I had it plugged into a power strip. Plugged into the wall direct and works just fine...
I mean I’ve got a pro 100s and honestly with the number of times I’ve just given up printing something because of an error with it is just too much. Plus not that impressed with the results compared to the price. Sometimes I have to use my dads £40 HP printer... that works every time without fail. Thanks for the video though
Thank you for the video this helped me.
I have Canon pro-1 and pro-100, my staff lost both power cord supply during transfer to new shop location, please is there any unique specification on the power cord so I can use it to identify it in the market.
My cable wasn't plugged in all the way. Ten alternating white/yellow flashes. It's the design of the printer, probably nothing wrong with your cable, just better/deeper insertion with thr replacement cable.
Mine is flashing the alarm/ white yellow ones 17 times, I contacted support, they said hardware malfunction, but I did not buy it from an authorized dealer, so they won't replace it. Any advice? I will try flipping my cord just in case that works.
The orange light is flashing 3 times then stops, and I’m getting the error on my phone that the “Printer Cover is open,” when it is clearly closed. I’ve opened/closed everything, pressed and held down the orange button, unplugged it- left it unplugged, reinserted the paper with 10-15 sheets +-, and nothing is working. I just replaced my old Pro-100 with this used one, and when I opened it, there was a piece of the paper cover that had broken off of the main cover- I managed to fix it…or so I thought! Any thoughts?!
HELP! On starting my printer.. the ink tray will not align. Sometimes it smashes on the left hand side. Error code is 2 flashes.. however even if I open the ink door. The tray is not moving to the center
I have the exact same problem. Took it out of the box, followed the instructions to set up. It turned solid white and installed the printer head and inks. Inks lid up red as they should, but then when as I closed the lid, made some loud clicking noises and then got the flashing lights. Now the printer head won’t more and the inks aren’t lit up red. Tried a different power cord but didn’t work so guess I’ll have to call customer support and hope it’s an easy fix
I also have the same issue with a brand new printer. I tried a new power cord, but that didn't work either. What did customer service say? I will be calling them tomorrow.
Mine says there is no paper but there is, used to work fine before idk what happened
I’ve had this happen and nothing seems to be working for me. So frustrating I regret buying this model.
First, thanks for the video... It's seemed to help many people. Unfortunately, I'm not in that group... I have a Pixma PRO-10 that's about 1 year old. Then one day I turned it on and the light started blinking away like yours, so when I found your video, I thought I'd found the solution... I live in Latin America and I have not been able to get a response from Canon LA... does anyone have an email address for technical help at Canon in the USA? By the way, I went to Canon LA website, where they offer email, telephone, and online chat support... guess what? They don't answer emails, their phone line is disconnected, and their online chat is just a blank page.
Hey John, I recently had the exact same problem with HP. I think it all has to do with California lockdowns because of all this Covid crap. I had luck contacting HP via their facebook page. I think because I posted a negative post on their page, they were very quick to respond. I was thinking about doing a video on the topic.
Ive solved a problem with my Pro-100 a few times by doing a hardware reset. I forget the combination of button presses but that solves it every time. I don't think its what Canon says either, the 'hold the resume/cancel until power flashes 9 times.' Good luck, its likely not dead. When i called Canon support in the Before Times, I told them about the flashing ring of death and they wouldnt even help me further. THey told they needed me to ship it to another state for review and then maybe pay 200 bucks for a new print head + fees. It was none of that. GOOD LUCK!
I got 4 flashing lights., only the Mayenta, even I replaced 4 new cartridges....It's not working? Someone know about that problem...Thanks
Error Code 5c20. This is my 3rd Pixma Pro and all Canon offered was $50 if I buy a 4th.
Power cable or power supply issue
Hello
I have the same printer
Canon pixma 100s pro
Recently I had a code error 1405
Btw this is a new printer i bought it since 2021
And I print around 200 paper
Do you know any solution without changing the head print 🥹
My printer has the same code. I lost the original cord during a move so I ordered a new one that said it’s compatible with the pro-100 but as soon as I plugged it in it had this error. Can you please provide a link or brand and voltage of the cord you purchased?? I don’t want to order another faulty one. Thanks!
I have the same issue with my new pixma pro-100 so I went out and brought a new power cord compatible with canon printers and the same thing happened. Not sure what else it could be.
Can't figure out Error Code 300. Any hints?
Hi
I wonder if you could help me please I have the same printer as you but for some reason the ink carriage will not come to the middle for me to change the inks it prints as normal but I can’t change the ink i have tried everything,
Thanks
Hello, Im having the same issue. did you ever resolve this?
wow i just got this and plugged it in. got 10 lights, which means you just have to call support. of course i got it on the weekend so now i have to wait for monday
@Grand Whizbang. Has the issue been resolved and if so what was the resolution? I have the same error code, 10 alternating flashes between the yellow and white lights. I'll be calling support tomorrow but just wanted a heads-up to see how you were able to resolve this.
@@SebanJose Interested to hear back if this has been resolved for either of you. I just got my PRO-100 yesterday and have the exact same issue, right out of the box
Same thing here. Any resolution?
@@anthonywilliamscreates I had the same fault with the alternative lights flashing ten times in a loop on my Canon Pro-10. I resolved the problem the first time by finding another power cable, and it worked. I'm just pleased it was an inexpensive fix. -UK plug
add my thanks but it only convinced me that the print head is probably screwed after cleaning and I will now only love the shiny new pro 1000 i bought to replace it. anyone want to buy an otherwise perfect 100?
This printer is pure garbage. I got this as a gift for my grandmother and her photography and it's no wonder she never bothered to use it, because literally all it does is spit out bullshit blinking errors because it can't do something as simple as feed itself official Canon photo paper. This thing is straight e-waste.