Airsoft Review of The Elite Force Glock 19 by VFC - $170 Airsoft Pistol
Vložit
- čas přidán 5. 08. 2024
- Airsoft Review of The Elite Force Glock 19 by VFC - $170 Airsoft Pistol
Elite Force Glock 19 Pistol: www.airsoftgi.com/product/Eli...
Elite Force Glock 19 Magazine: www.airsoftgi.com/product/Eli...
Elite Force Glcok 17 Pistol: www.airsoftgi.com/product/Eli...
Elite Force Glock 17 Magazine: www.airsoftgi.com/product/Eli...
USAirsoft Instagram: / usairsoftyoutube
Airsoft GI Webstore: www.airsoftgi.com/
The rade synthwave mix I was talking about: • 'Back To The 80's' | B...
Like my page on Facebook ► / usairsoftyoutube
Subscribe Today▼
/ officialusairsoft
Airsoft Top Series ► • The Airsoft Tops Series
Thank you all for watching and for your continued support to build this channel! : )
now i want a glock that says mcdonalds...
like a boz sammmmme
Absolutely. A KFC or Taco Bell one would be dope too
like a boz glockdonalds
They should have glocko bell
Fuck glocktendo glockdonalds
Glockdonalds?!
To keep up with the restaurants in the hood, each happy meal now comes with a brand new glock 18c
Hahahahahahahahahahaha😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒
i go to that McDonald's i pull up in the drive through blunts lit, drill music playing and i ask the cashier if they want to hit the blunt
With every big Mack you get a Glock 17
Yes lol
Your description of Glock's personality is why its been such a hit with departmental and duty use all over the world. It just does its job.
the airsoft glock mags are more expensive than real glock mags for a .45
Real mags don't need to contain pressurized gas.
@@RedVRCC Also real mags are quite simple in function
@jord heinz Lol true. I bought 2 extended mags on Amazon at 39.87 and also got my g18c for 160$ as Exike was 40 dollars more and the mags are i think 60$. I went on yesterday to purchase another g18 and 2 more mags and guess what!!!??!!! Those bootie holes raised the price. So i slowly walked to the shower turned it to icy cold got in crowched down and cried. Didnt even take my clothes off.
thats a little bit horrifying!
Or roughly same price. In my experience w 9mm
"this pistol chronos at who cares, and the range is whatever with .you'regoingtousewhatever gram bbs anyway.
finally somebody says it. for pistols none of it matters.
Right when I saw this comment it happend in the video lol.
You basically use a pistol for when the enemy players are up close, and your primary won’t do for multiple reasons.
Fuck range and whatever BB’s, I just need the pistol to send the B.B. from the magazine to the guy in front of the barrel, and it’s already a decent pistol if it can do that without problems
C Hinkle I play pistols only...
To some degree it does
Yeah u don't even need to adjust hop up on pistols
Praise worthy, for $70!The only issue was the round gasket ring seal between the CO2 and needle czcams.com/users/postUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ . Withered away, and I'm having a tough time finding a replacement.Gun still works perfectly, but needs a new gasket. Can someone please say where to find the gasket replacement?
You want to see a G18c.... Don't we all...
Ghost-_- Sniper Just Dont get WE Tech
I have two why? They are great. You will see it used in my videos.
I have one and I like it
The Røøkie ZgamerZ just another WE hater
You mean dont WE all? ;)
i dont even do airsoft but i really wanna get one of these lmao
I just got one and it’s GREAT
Likewise. I just wanna have it to just have it.👀
And to shoot cans from time to time.💀
Bestgameplayer10 it’s a little expensive for plinking if you want a Glock for targets get the WE or Tokyo Marui glocks they are less expensive
Cereal Mafia - That would be the smart thing to do but I kinda want the officially licensed for the novelty factor. In fact, I JUST placed an order on Amazon like an hour ago.
But you’re right. $180 is expensive for just plinking so I’ll think about reconsidering my purchase throughout today.
Bestgameplayer10 your money not mine but I will admit the trades are the greatest on mine. (17 Gen. 3)
I love this review. hilarious that the beginning review could fit an actual Glock 19. The Honda Civic of the gun world.
I like how you go over how the licensing means jack. I just messaged PTS a few days ago asking if any of their new mags would fit my WE-Tech ACR and they told me, “We don’t test our mags in the counterfeit ACR”.😂
Only reason I bought the WE-Tech version is because it’s 1:1 scale with the real Remington ACR whereas the A&K and PTS models are not and have the charging handle in the wrong position. One of my friends had one too and said it shoots pretty well. I found midcaps that will work without me taking a dremel to the internals though so it’s all good.
The oil on the slide made me uncomfortable
Jc hey dumbass it’s literally oiled by the manufacturer
@@hatepurrpp2651 lol ikr
It's by the manufacturer.Its not a big deal just wipe it.
Cum
jeffel80 ummmmmmm
Just to make it more well-known by adding another comment: these Glocks are apparently able to accept WE G-series magazines, which are significantly cheaper.
I wish these were available in Canada, but nobody’s importing them with extended inner barrels yet.
One day, I’ll probably get one if they make it here.
Go to your local airsoft store and ask for the WE/TM/KJW glocks. Almost every airsoft store has them in stock but doesn't advertise them for obvious reasons.
buyairsoft.ca sells them for supremely cheap (an insanely low *$125 CAD* for KJW G23 w/ plastic slide, $150 CAD for KJW G32 w/ metal slide OR KJW G27 w/ metal slide, $160 CAD for KJW G17 but they only sell threaded barrels for the 23 and 32 and they have tinted composite polymer lower receivers to comply with Canadian airsoft law as they are sub-366 FPS) so I might pick one up one day.
UPDATE (28/10/2018): G23 is now $130, G32 is now $165 but they’ve finally started selling G17 and G18 models with opaque bodies (CO2 version (gun with CO2 mag, can still use green gas) shoots high enough) for not much more. However, shops are starting to get their hands on them, so that’s probably worth checking out (unless they’re supremely overpriced, even by Canadian standards).
Replicaairguns.ca sells them
After comparing mine to my real G19 gen 3 I found that you can use alot of real glock parts like the slide release, mag release, the mag base plate and even the plate on the rear of the slide. I replaced the stock ones with aftermarket silver extended releases and silver reaper logos on the base plate and slide base plate.
I loosened the screw just a tad right under the back site and the slide now closes perfectly every time. Love my G18c and looking to buy other glocks. As I have sever real ones in the IRL airsoft crazy world. My G18c extended Mag allowed me to shoot 3.5 to 4 full mags on one fill up as well so kudos to that thing. Thanks for you Videos as you have helped me out with seeing certain guns i have looked at and made choices based of what i saw like and or hated from your Reveiws. Thanks a bunch and keep it up!
Here’s my take
These Glocks are cool, don’t get me wrong. It’s bout time we got a legal Glock in Airsoft. I just wish it wasn’t VFC. If it were another WE or a KJW and their awesome gas gun past. I myself have a KJW KP-17, and it’s awesoooome. It’s a Glock but no trades, if it had the trades it would cost another $50. Kinda ridiculous.
The replacement mags... $45... you’ve gotta be takin the piss. A WE and KJW replacement mag is less than $30. Way better price. If you’re looking at getting this gun as your first one and ur a beginner I wouldn’t recommend it. Get an elite Force 1911, or an ASG P0-9. Wait a few months for them to work out the kinks of these first batches.
That’s my take.
XXQuickscope56 well said from one of my favs
XXQuickscope56 same, probably won't be buying one anytime soon even though they look awesome.
XXQuickscope56 not to mention eliteforce piss poor customer service and lack of upgrades
XXQuickscope56 they take WE mags....and don’t ever recommend elite force 1911s lol
Devin Ghillie well I just did. #Whatchagonnadoaboutit
EF 1911 is way better than this crap lol
Those first 18 seconds is literally everything Airsoft I own except I'm the Grandmaster myself lol. Great video although the issue you ran into with the slide hanging up when slowly racking it back and forth is actually very common in most, if not all Airsoft GLOCK replicas.
Those magazines cost more than actual G19 magazines!
My first video of yours and I really liked it. Enjoyed your style and way of talking. You got a new sub 🤙🏼
Dude thanks your the only one who talks about more of the gun am buy this glock and a Nother clip thanks man
I bought the non-blowback edition. Dead accurate and amazing. Totally worth $70
Great Review, Keep Up the good work! Can't wait to see you again at tx paintball
that opening was priceless like the glocks people have made without the licensing
I like the fact that the plate hides the valve so when I drop the mags I don't have half the field on the valve
I agree but for a different reason, as an aspiring film maker the base plate on the magazine makes it that much more realistic
Yeah but it is not that solid: mine broke after I dropped it on wood.
Now there is a long crack on the cover.
@@gflaig9131 same with mine
I have the E.F. G17 Gen 4 with 3 extra Glock mags. I love it, feels and shoots awsome. Feels more real than my We G18c, also it has stronger polymer and metals for the build then the WE.
Will be happy to see the G18c from Elite Force when it comes out.
Can you advise me? I really like Glocks. But everyone tells me to get the WE instead of umarex. Is it true that it's not worth the extra? If TM was still making glocks, I probably woulf have bought a TM one and put a metal slide on it
@@QuintenBuyckxGet a WE if you want to modify it, find the parts easily, and it be cheaper. Get the EF if you want to train shooting, and get simple non-characteristic changing upgrades. Most of the gucci customizations are terrible, this is probably late but there ya go.
Very good review straight and to the point.
Ah, I see you're a fan of Prime Thanatos as well.
Greetings from Ireland Scott, love your videos and youve intrigued me on almost every review, youre a grey youtuber keep it up.
Nathan Geraghty do you play Irish music, cause I do
Blue Devil I actually don't, love almost all of it though, we make some great traditional style music.
Just wanted to ask I play Button Accordion and Tin whistle, you are so lucky to be in Ireland
I love this dry sense of humor
I bought a glock 42 from the same company for the same price, It was so good and it never broke down or stopped working, So today I decided to buy a glock 19 gen 3 (One being reviewed in video) and I am so stoked to get it in the mail!
I have the same model but the co2 version, I love it. Haven't had experience with other airsoft equipment yet, because I don't don't have much money for the hobby (besides the garbage cheepo stuff that depending on what you get can be mediocre to shit) but, I have run quite a few rounds through it, and it works like it should, feels nice, shoots straight, (and differing from most opinions) looks amazing. If you wanted something good to start the hobby off with (like I am), I personally, would recommend it. Ps it costs about $70, buuuuutttt, it's pretty fun to use.
I'm glad I purchased the previous Stark Arms G19 Gen3 for much le$$, also made by Umarex with Semi/Full Auto selector under the slide and 100% exact same trade marks as the real one. Now they sell same pistol under Elite Force G19 and added the" Officially Licensed" logo to the handle replacing the Made in Austria Glock Inc. Smyrna, GA and leaving the US. Pat numbers blank. They also removed the Semi/Full Auto selector and on top of that, they raised the price. Hard to find other brands on eBay (WE- KJW, etc) because they will be removed.
Love the slide manipulations with the finger in front of the slide
Good reveiw :)
This would be a nice piece to mod and use for CQB, if you had some good changes on the inside, then some sights and a drum mag. Turn it into some sort of Artillery Luger but it's a Glock.
Great video!
I have been waiting this review
I own a 19 and I love it! It kicks really hard and I think that is awesome! I don’t like how expensive the mags are!!! I hope they produce custom parts for it soon!!!!!!!
Great vid! Keep it up
@usairsoft how do you feel about the VFC P320? I had one and I loved it , it’s just smooth ( for me at least ) and it’s easy to upgrade. I switched to the glock 19x and it’s giving me problems ( I fixed them but still ) I’m definitely going back to the m18 p320 black
1:02 i thought that was my fire detector LOL
thats how they make their money back like printer companies, cheap printer expensive cartridges, cheap pistol, expensive mags
I have the 17 gen 4 and out of my 6 pistols it is by far my best one. Yes the mags are pricy but then again youre paying for quality. Also any kwa magazine is gonna be around the same price.
GLOCK™> not ™
I watched this a few hours after purchasing the product and so far I can say it has performed great for me! I just Wish the I could get the spring in the mag to stay down without holding it while loading the gun.
Perfect for training - fits all my ccw holsters
Trevorasu may I ask you what is a good holsters for airsoft gun im looking to pick one up
Hey man, I'm looking into getting one of these for home training as well. I may make a little makeshift range in the backyard and just mess around with this out there. How has it been? Do you feel like this negatively affects your accuracy when you shoot you actual G19? Also, how has it held up since you posted your comment.
Same here. With the exception of holsters that come in front of the barrel since the orange barrel tip/extension protrudes about half an inch.
@@johnshea5312 that can be taken off, you'll need a plier though as these come with adhesive, but they are meant to be taken off by the user
Thank you for this comment. Not ONE review I've seen talks about holsters. Practicing draw to first shot is my main reason for buying this, so it NEEDS to fit my holsters!
I got her late but this is a good review because Glocks are my favorite pistol.
nice review on the 19!
Would you suggest the green gas over the co2 version? Also witch version will run longer per full or cartridge. Thanks
This is a great handgun! I got mine about two months ago. Great all around.
just got my glock 19 6mm airsoft gun, and i gotta say, this item was totally worth the money!
After only 3 weeks of use the frame cracked next to the slide catch. Also the slide was damaged using too much the slide release and it caused the slide not locking back. Great for training tho. If it had a bit more stronger frame and maybe steel slide it would be perfect. Im bow looking forward to ghk glock 17 model that was promised to be released later this year of 2020.
This seems exactly like the Glocks released by VFC years ago. If so, there are OE and Aftermarket parts available at WGC shop.
I know it’s airsoft but please always practice as if it’s a firearm so that you don’t develop bad habits. Good review.
My dad has a Glock 23 and I gotta say, that replica looks exactly the same, Great review!
Totally Not Fabian
The Glock 23 is basically the Glock 19, but chambered in .40 instead of 9x19mm. Makes sense that they’re similar.
It’s pretty much the same gun just 40 caliber lol
i talked to a sales/tech guy at a local airsoft store and he told me that he'd choose a WE over the Elite force because the WE is based on TM parts. How do you think the EF compares to the WE glock?
I love your videos
“A Glock fits well in the hand or at least my baby hands”
Me:what?🤣
I understand that this comment will likely come after many of you have bought this, but as someone who got this product from outside of airsoft, I feel like my issues with reliability are something important to mention. For reference, I use airsoft guns for dryfire and dryfire about 100? 150? times a day (i'm not quite sure so take this number with a grain of salt). I have had this product for about 4 months and have had the hammer assembly break twice, both from what appear to be fundamental design flaws with this glock although they appear to be in other glock systems. The first time, about 2 months in, the tab that the hammer spring pushes the hammer with breaks. The hammer is made out of aluminum and this part sheared off causing the hammer to no longer work. I ordered a replacement hammer from a different company which while made out of steel, did not fit and had to be modified to fit.
Now fast forward to a few weeks ago. I first noticed that similar to what was described in the video, the slide would get jammed up and stuck half way between fully open and fully closed. I thought nothing of this as the problem eventually went away with a few days of dryfire and i thought nothing of it. A few days ago i noticed that the trigger got significantly lighter than it was normally. I didnt really care about it and continued to dryfire until it started to get annoying. Apon disassembly, i noticed 3 problems. First, the hammer spring was bent out of shape. When attempting to bend it back, the spring snapped. Second, the spring that resets the hammer bearing(idk what its called but it allows the hammer to get cocked smoothly) snapped in half, likely what caused the slide getting jammed open. This could be partly my own fault as i had to bend that spring to get it to fit with the aftermarket hammer but it didn't break where i bent it which confused me. Third, the hammer housing had a physical indentation where the hammer hit it. This was a result of the hole which is used for a pin found in the glock 18 not being filled. This not only caused a dent(which would not be a problem on its own), but caused cracks to form in the hammer assembly.
Another problem that has consistently happened is the breaking of the baseplates. These magazines are quite heavy and when impacting wood flooring, the baseplates tend to shatter. Now this was solved by adding foam pads to the bottom of the plastic baseplates, but it is still a problem.
Overall, these problems appear like they would be consistent throughout all airsoft glocks, but something to take note of if you wish to use yours for extended periods of time.
Thanks for reading my essay, for completing this task, you get 1 extra brownie point.
I’ve had mine for about a year now and have gone to my local airsoft field every weekend and I have never experienced any of those problems. I guess you just got a bad one
man i cant wait until the next vid
Very good review love this gun i hope to get one soon and will u be at the airsoft game this SAT????? and u should review the XCR-L by Echo1... Tan or black its a very good gun, i have it myself. btw love our vid hope u get over 2 million subs within this summer!
i have a question whats your guys oppion about the h&k usp .45 non blowback pistol im new and jus getting into airsofting i would really like to know
I just bought myself a Glock 17 Gen 4 for my birthday two days ago as my first ever GBB pistol. The store had many selections of pistols, including Hi Capa legends like the Tokyo Marui 5.1 and the JW Taran Tactical Combat master. But for some reason the good ol' Glock felt the nicest in my hand and really had that blend of ergonomics that I was looking for in a pistol. It's nothing groundbreaking or fancy, but it is a serviceable and reliable sidearm that won't let you down for the sheer consistency of it all. I cannot wait to go to an event and bring this to a field so that I can truly let it rip. The mags are too expensive tho so that is a bit of a downside.
Hello USAirsoft, could you recommend an aep that is also a blowback and has a straight mag design?? if such a thing do exists?? thanks!!
Thanks you inspired me to buy it
I live in Louisiana there's not really any airsoft fields
I was planning to go the high ground complex in Houston but my friend isn't in to CQB .So what fields in eastern Texas can you recommend ?
Can you please review the CYMA or JG RPK? I am wondering if I should get one, and if so, where? Thank you so much.
Is the extractor supposed to wiggle like its broke? or is every one of them loose like that? I baught this Glock 19 from y'all literally like a week ago and i've put less than 50 rounds through it and the part thats supposed to be the extractor is very loose and i dont think its supposed to be, how's it falling apart when ive barely had it for just about a week and only shot at target? lol
What upgrades can I add to make this reliable and tough enough to run co2 mags?
Just to let everyone know, if you’re using a real Glock hard case holster it either might not fit or barley fit. The airsoft glocks are a little thicker then the real ones.
"Chronos at who cares and the range is whatever!!!" HAHAHHAHHAHA
I saw 44.95 and thought if the price of bananas in unturned
No threaded barrel? Is it still possible to take the orange too off, or would it look like crap?
Excellent gun I just need to know what type of brand of high-quality BB's can be used
Finally another review
Dude, you're in Plano, TX? I'm right near there! Do you ever play at the D14 field in Sanger?
Wow, so VFC even used the same "GEM208" serial number on the barrel and slide that did years ago.
yeah i'd say the slide hang up was a tolerance thing. Just a hair on the larger side of the tolerance for the barrel and/or smaller side of tolerance for the slide
shout out to gi tactical for never having anything in stock lol
Where is the store u mentioned in the beginning I live in frisco and where do you play
You're like the Regular Car Reviews of airsoft.
The gap between the slide and frame looks far more consistent than any of the real glocks i own 👍🏻
Is there a way to safely take off orange tip?
I have that glock 17 and it is very nice as a side arm when I am not running my M92
My glock 19 airsoft gun did not come with a orange tip if you know if I need one or where to buy orange tips please tell me
You should make a review of (the best) Steyr AUG (A1), or a few high end bullpups for that matter
I got this gun and the magazine it comes with won’t fill up with gas the mag is not leaking it’s just when I try to put gas in it only fills up for second and then it won’t fill anymore please help
I’ve got the non blowback version of this and it’s a decent sidearm, don’t expect any long range accurate shots though
I just got the same Glock yesterday and my mag has the green gas valve on the back instead of the bottom idk if that’s how it’s supposed come???
I have one and I love it I can take it apart and put it back together in less than one minute
Hi, Can you dry fire this without racking or pressing the rack button?
Does anyone have any experience trying the Green Gas magazines into the CO2 Gen 4? They fit but do they shoot and how do they perform? Im asking because CO2 shoots too hot for some CQB scenarios so ideally would buy CO2 pistol and have spare Green Gas magazine for indoors short distance.
So I have this exact airsoft pistol and my 6mm bbs do not fit the magazine. What do ?
As far as the standard gbb models go... Idk if they're worth the $170 tag plus the expensive mags. But the CO2 high end versions are what I'll be waiting for. I want that 34 that they have lol
I also love synthwave type music awesome video btw :D
I’m a paintball dude but I want to try to start playing both
What's sad is that the G18 was a failure. I've replaced the magazine release on mine after fielding it for just this year, the full auto works when it wants to, the slide wears at the slide catch. I actually had to grind out the wear and shim the slide catch to take all of the wobble out of it in order to prevent further wear. This was done on the replacement. Same issues as the one I sent back. Welp, I won't hold my breath on umarex fixing these issues on the G18.
Same thing happened to my g18.
This is gonna be a crazy question. But, how many inches of styrofoam do you think these BB's can penetrate at about 5-15 feet away? I may make my own little range and I'm looking into styrofoams to buy but I'm not too sure how much penetration power these things have.
low power, will not penetrate a cardboard box
Why did you keep releasing the slide before putting in a new mag? You can't load a new mag with the slide back?
Well now they’ve done some major quality control and now they are waaaaay better
Oh yeah Yeah - Thanks for the heads up. Im probably gonna buy one the next time I get paid.
What would you recommend to remove that damnable warning billboard on the bottom of the trigger guard?
That stands out like a freakin’ sore thumb to me.
It's been difficult to get parts for my Glock 19 gen 3 😏 I finally found a barrel set but I can't find the guide rod and return spring . I'm also needing a hammer set which is most likely going to end up being replaced by the EF G17gen4/G18C trigger hammer group..