SolidWorks Weldments 101 - Simple Table
Vložit
- čas přidán 11. 07. 2024
- Modeling up a Simple Table using SolidWorks Weldments is easy. This video will take you through creating a 3Dsketch, downloading the latest Weldment Profiles off the SW website (via Design Library), adding them to your folder, and then using them to create a simple Table. Trimming and Extending, and End Caps are also shown. Then finishing them off using a Weldments Cuts List, and a Bill of Material.
- Věda a technologie
Fantastic! Incredibly informative. Included a TON of great information, especially the little tricks to coax SW to give you what you want. Love the properties tips for BOM description and getting the auto balloons to switch back to the weldment cut list. Learned some things I never knew. Thank you!!
WHAT A CHAMP!!!! THANX MADE MY LIFE SO MUCH MORE EASIER.
Excellent! You're the best tutor have ever listened to in you tube. Helped alot
Thank you! I worked in Solidworks and with weldments for about 2.5 years but not since 2013. I'm trying to refresh myself on it before an interview. This was perfect.
EXCELLENT! You're a natural instructor. Everything we need to know, what to avoid, where to find, how to do, all at the right pace. Thank you, thank you, thank you.
Exactly what I was looking for. Thanks for the clarity and especially for not assuming that we're all at an advanced level.
Thank you your just the right speed and concessive direction
Great video, very helpful and well developed. Thank you. Now, I'm going to go check out your other SolidWorks Vids!
Amazing, this could've saved me a lot of time over the years. Thank you
If you kept it going till now you have all the respect that I can give
This VDO is cover all necessary thing I want.
Thank you for good tutorial.
Excellent, simple but full of information needed.. thank you !!!
Thank you so much for all these tutorials bro. So much valuable knowledge
Haven't used SW yet. I was using Frame Generator in Inventor which is similar. Nice tutorial. Thanks for posting.
THANK YOU!!!! you actually guide your viewers through soft, unlike so videos that rush the whole tNice tutorialng or talk too fast.
This video was extremely helpful, thank you. :)
Great video and really helpful! I couldn't get a grasp on how the setuper works but it's all clear now.
Excellent lesson. Learned some nice techniques here. Many Thanks !!..
I'm a new student from Tunisia 🇹🇳i found u in instagram and now i'm following you on youtube. nice job thanks you so much
Very good tutorial. Got me started right away. Thanks a lot!
Really nice video to get started in weldments...thank you very much... Keep rocking
Excellent tutorial! Thanks a million.
Nice job!!!!! Pretty clear explanation!!!!
That was incredibly helpful. cheers!
Very helpful, thanks! I thought I was crazy for putting each leg on a table in a separate group in a Structural Member feature, but it looks like that's how it goes.
Also good to see that eventually you do have to use trim/extend sometimes if corner treatments don't come out right even after trying different settings on individual corner treatments.
Learned about Weldments at a recent SolidWorks User Group meeting. Insanely useful tool for so much more than actual weldments. I think many could be helped by using this feature.
Great tutorial! Thanks!
Excellent video. Very helpful. Thank you
All the way from Mexico City, thanks a lot!!!
So simple and detailed video, it's now going to help to start working wid softsoft!!
this video helped a lot, thank you
Thanks man! subbed for the instructions!
Great tutorial, thanks.
thanks for your good tutorial
cool. solved my problem. Nice work
Perfect!
Awesome!! Helped me alot
awesome tutorial mate.
aah, i just got into making soft rn and tNice tutorials is so helpful and your voice is so sootNice tutorialng btw! thanks for tNice tutorials tutorial
That was great. Thank you.
That was a very good video tutorial. Thanks
Muito bom o seu conteúdo parabéns!!!!!
Very helpful, a lot of information.
Aweso tutorial bro! I like how you gets down to bus
Very good and funny videos bring a great sense of entertainment!
Very helpful. Thanks!
tnxs ,that was lots of help to me.in other words :a complete intro to weldments...
Thanks for the help.
love it thanks!!
You just unconfused me; thanks!!!
You just deserved much more thab "just" over 300k subbers.
Thank you for teach this.
excellent. thank you.
dude tNice tutorials is super good! subbed
Wery nice tuturial!!
I love soft soft so so so so much!
great work
much appreciated , Thanks
it helped a lot
This looks so much better than inventor. I have only begun learning inventor but I think I wish I had solidworks instead. Can you give any advice about which is better? I have been drawing in AutoCad Mep for 10 years and used Autocad for over 20 years. I'm just looking for a new software to learn and wondered which is better. Any advice would be much appreciated. Thanks for video.
In my opinion inventor and solidworks are very similar! But in the industries tday they use more solidworks then inventor. Solidworks is much easier to learn then inventor.
When i select the line at 6:51, it creates a plane and then some square like thing, it looks really weird, How do i fix this?
This video has been very helpful to me. I'm building a similar table for my shop. Can you point me in the right direction to model a piece of 1/8" steel for the top? I created a plane on the top surface, but I can't seem to locate the table top to the table since it's on a different plane.
ty u help me so much
Good tutorial
Ty it was nice ❤️
thank you
I was surprised how understandable tNice tutorials tutorial is, thanks!
Earned a sub from me! Great video!
Hi,
at the moment I am designing an overhead crane beam. is it possible to analyse the effect from moving crane on the beam?
Thank you
What do you think of Autodesk Inventor? I am trying to decide which one to work in.
I design lots of models in Maya but would love to see them in this program so I can have the materials, stress points etc...
wery good and nice
Very Nice!!! Like Like
ProgressionSupport,
So I have just installed Solidworks 2016. On my previous version it was easy and simple to use my weldments profiles. I do understand how load your own profiles or any kind.
Now the problem I run into is: When you right click on your tab you see your options: Assemble, Layout, Sketch, Evaluate and so on... And for some reason, and maybe I did something when I first started to use solidworks, it doesn't give me option of adding weldments tab? So I can't use it at all?
Am I supposed to do something in setting to be able to use this feature? Or maybe it's my installation was done wrong?
Please help help!!
Thanks,
awesomeeeeeee. Thanks
Great video, I don't seem to be able to tab the legs to the front plane, am I missing a setting?
very good！
How did you convert the cross hair to pencil of your mouse cursor in Solidworks16?
If tNice tutorials isnt the most true tNice tutorialng ive ever read
verry good sir
A very good video, I'm just a beginner in SW and I had some issues, in first tab, the pieces description, it did not show anything, it was empty. Does anyone know how to link the information or fix it? Thanks
Very good
impressive,very well said,tNice tutorials is what I need to learn soft soft,your the bes n
lmao i was tNice tutorialnking the sa but don't give up! We got tNice tutorials!
Cool!
tnx a lot!!
I know this is gonna sound like a dumb question, but right after you resized your table.. you clicked your mouse and dragged the table into view. How did you move the camera without changing the angle of your camera. I know this is a dumb question, but I just can't figure it out. thanks in advance.
Thanks
Thanks you ...
hi man nice video but if got solidworks 2016 and when i want too ad the folder into the original folder is difficult because
the folder layout is different how could i fix this
thanks
Thank you, I was drawing 2 hours haha
nice
GREAT
ahh you held down control and the mouse wheel... lol im dumb, great tutorial btw.
i couldn't find the weldments profile folder in the English folder do i have to create one ?
I keep coming back to those basics videos because I STILL don't know how to properly use the software. I'm gonna cry
What is the tap k ? Which one ????? 1:05
About weldments, the only thing I wonder is why it's not available in the assembly?
Inside a part, there's a restriction in reusing each of these profiles in another assembly.
Plus linking with ERP/SAP becomes critical as well.
i hope your successful as well
Can you give the each piece an individual part number?
anyone know where i can download more weldment profiles? i need smaller tubing