This video shows you how to repair OnePlus 7T broken Screen. Get OEM Replacement Parts For OnePlus 7T / 7T Pro : witrigs.com/ezn72 OEM Screen for OnePlus 7T : zegsu.com/s/di59q OEM Screen for OnePlus 7T Pro : zegsu.com/s/di599
I used this video to fix my phone and it worked very well, got all the right tools based on the video and the screen from their page. The only thing that did took some time, was removing the broken screen, after that it was a pretty easy fix.
I bought the Samsung a42 5g screen replacement and the link to the instructions sends me here. luckily there were other videos available. The kit was good though. it came with good quality tools and I am happy with the quality of the screen. It was not nearly as difficult to replace as i thought it would be.
TLDR: Tips and Tricks, buying from Witrigs and self repair I was so scared doing this repair and buying from Witrigs, but I bought this screen on their website and after seeing the many many comments saying it's a scam, I was so stressed. But the item arrived on time and we'll packaged in great condition. I followed this tutorial and now I have my phone back in working order. Many thanks to the person who made this video! P.S. a tip for removing the screen -Heat near the selfie camera and slip a small razor between the screen and the black buffer where the camera is, then work your way around like with the back panel. Also when you do the back panel, don't put the plastic in too far you can damage the black square, I'm not sure what it is but better safe than sorry. One more thing - 50ml of this glue is more than you think and way more than you need, don't buy too much -it's very expensive. Once again many thanks to the person that made this, without you I could have been spending £130+ more
Thanks for the great video, and the parts and tools!! One thing I would add, when removing the screen, there is a plastic bezel that the screen sits on, and that needs to stay on the phone. It's the strip with the holes for the ear piece in it at the top and it runs all the way around. I accidently got underneath it and broke it into several pieces. But it will probably be fine to glue most of it back on to the phone, and then the screen on to that.
@@wallace4932 I bet it's just a 'best practice'. Same thing when working on the car; Neg. Battery cable off is always the first step. With electronics, it seems like static discharge is by far the biggest danger to worry about.
@@MrWolfTickets Yes...that was the first analogy I thought of too (car battery). Just trying to reduce the amount of disassembly to replace screen. Thanks!
My phone screen went off (no scratch on it still), I got it changed from service center and now the fingerprint sensor is not recognising.. tried setting new n still it's showing same issue Please suggest 🙏
I have the same problem. The setup works, but it doesn't actually recognize my finger when trying to unlock. I thought I might have damaged the cable going to the fingerprint sensor, but if you're having the same problem, I guess not.
@@glitchhin332 if remove the your screen you have to preserve the plastic buffer thats attached to the original screen and then take it off and put it in your new screen.
@@MrRonski there are three layers to the phone screen 1.the clear plastic thing covering the screen 2.the screen 3.the black plastic lining on the edges on the phone that is underneath the screen. are you saying to Not remove No.3 or No.1, sorry for the confusion.
Great Video, I'm planing of just buying a OnePlus 7 Display and build in onto my OnePlus 7t Smartphone. I need to restore my Data after the Display has cracked. The adapter size looks the same for all the OnePlus Models. Just the Display Size is a bit smaller on the OnePlus 7, but maybe it will work. What do you guys think?
Hi man I have OnePlus 7t my screen got broke And is a full black screen I plug the phone to the charger and the screen still black. But when I push the sound button down and up It give me feedback. Do you think I have to made just a simple screen with no frame replacement, or will I have to get a new frame?
I think I messed it up. The screen takes a couple of miliseconds to recognise a touch signal, wich I didn't notice while testing. And also I damaged the cable connecting the fingerprint sensor (because it got stuck to the battery adhesive) so it isn't working anymore either. Additionaly I left the old battery in because the new one showed 1% even though that definetly wasn't the case because it showed that through multiple boot-up cycles and normally the battery would've been dead by then. I'd rather have a working battery status than a new battery that only shows 1%. I have no Idea what is causing the screen thing so I'll hold off on fixing the other problems for now. Help is appreciated. Edit: Somehow it was a software problem all along, the fingerprint sensor and display work excellent after the last update. I guess the cable held up against the little plastic pry tool after all (even though it looks a bit wavy now). Good thing I waited a bit before buying a new phone. Now it would make sense to swap the battery, but honestly right now I'm just happy everything is working so Imma wait till the battery actually needs to be swapped. Edit 2: Wait nevermind, it's only the screen that's working again. I can set up a fingerprint now, but it doesn't recognize my finger when I try to unlock my phone. I might replace the cable that I probably damaged, but I'd rather not for now. -Edit- Update 3: Actually the fingerprint sensor did work, however with a fairly low success rate. I noticed that when I pushed down the bottom left of the screen, the fingerprint worked way better. When I was putting the screen in I was focussing on the top of the screen, since the earpiece plastic cracked and I wanted to make sure it glued in properly, so the bottom was pretty loose. So I took the screen off again and really made sure to remove all the glue I could and tried putting it in properly. I also put a little too much stress on the old battery in the process, because I hadn't put the pull tab back in and the battery rebonded with the sticky pads way too well, so I replaced it with the one I wanted to put in anyways. The fingerprint sensor works pretty much like new after this, even though the display is still not seated perfectly. Right now I'm waiting for the battery to charge but I don't know if it'll be better than the old one, since it seems to have either been on 1% the whole time it was stored, wich puts a lot of stress on the battery, since the optimal charge would be around 50%, or the status is not acurate, wich is probably unlikely, as it is going up in percentage right now. Also it's worth mentioning that the software bug I encountered was probably because I forgot to shut the phone down after testing the screen and removing the battery again. Didn't encounter the bug this time, since I payed more attention and I didn't need to test the screen. The screen is good now and there were no hardware faults on it the whole time so you should be safe buying it. As long as you don't do any mistake during the repair. I'll do an update on the battery if I remember to.
I can't get this damn screen off. There's no where to grab the phone but on the edges of the screen. I heated it up for about 6 min and it's still not budging. Any help would be great.
First - heat the part of the screen where you start, second - use isopropyl alcohol 99% to dissolve glue between glass and frame, drip it onto the surface of the razor, and then plastic card, when you start to see black glue coming out with a blade and then with a plastic card - you are on the right way=)
@@BOSCOCHUNG Is that so? I did the repair with the screen only, the plastic frame cracked at the earpiece while removing the old screen, but you can't tell now that the new one is in. I don't think it's worth the effort swapping the whole frame. And you definitely don't have to.
First of all thank you so much for making this video, It's helping me undertand how can I fix my own phone. Now I to my question in the video (2;10) do you use some kind of Adhesive or super glue called B-7000
I recently replaced my broken display from service center. And now noticed my alert slider malfunctions. Some time it works in reverse order. Some times it works randomly. Not sure if it is software problem or the service center guy made some mistake. Pls help.
@@EricWitrigs why do you make publicity for a screen who isn't even on the market yet in china... It has never been in stock on your site so stop selling bullshit in your video's
Nowhere it does not exist, it has been 7 months since this phone launch and nobody could make a digitizer screen replacement, and now with the corona it will take like 4 more months to even see one.
Search it in aliexpress, I bought it there and I am waiting for the DHL shipping, I paid 150 dollars approximately, the price down a lot in the last weeks, the launch prise was approx 320 dlls
This video shows you how to repair OnePlus 7T broken Screen.
Get OEM Replacement Parts For OnePlus 7T / 7T Pro : witrigs.com/ezn72
OEM Screen for OnePlus 7T : zegsu.com/s/di59q
OEM Screen for OnePlus 7T Pro : zegsu.com/s/di599
OnePlus 7T Screen Replacement (Global consumers): www.witrigs.com/oem-screen-replacement-for-oneplus-7t
I used this video to fix my phone and it worked very well, got all the right tools based on the video and the screen from their page. The only thing that did took some time, was removing the broken screen, after that it was a pretty easy fix.
What did you do to finally get the screen off?
How did you get it off in the end?
Try placing ductape on the cracked screen to keep all the broken lcd together next time
I bought the Samsung a42 5g screen replacement and the link to the instructions sends me here. luckily there were other videos available. The kit was good though. it came with good quality tools and I am happy with the quality of the screen. It was not nearly as difficult to replace as i thought it would be.
Where did you purchase them?
TLDR: Tips and Tricks, buying from Witrigs and self repair
I was so scared doing this repair and buying from Witrigs, but I bought this screen on their website and after seeing the many many comments saying it's a scam, I was so stressed. But the item arrived on time and we'll packaged in great condition. I followed this tutorial and now I have my phone back in working order. Many thanks to the person who made this video! P.S. a tip for removing the screen -Heat near the selfie camera and slip a small razor between the screen and the black buffer where the camera is, then work your way around like with the back panel. Also when you do the back panel, don't put the plastic in too far you can damage the black square, I'm not sure what it is but better safe than sorry. One more thing - 50ml of this glue is more than you think and way more than you need, don't buy too much -it's very expensive. Once again many thanks to the person that made this, without you I could have been spending £130+ more
thanks! selfie camera to start worked!
wizard man, his websites far cheaper than anyone else!
Thanks for the great video, and the parts and tools!! One thing I would add, when removing the screen, there is a plastic bezel that the screen sits on, and that needs to stay on the phone. It's the strip with the holes for the ear piece in it at the top and it runs all the way around. I accidently got underneath it and broke it into several pieces. But it will probably be fine to glue most of it back on to the phone, and then the screen on to that.
Success! Also good to note, the b7000 adhesive will come off of the screen and side of phone after it sets up, so don't sweat a little squeeze-out!
I get the "always remove battery when working on...". But if battery is dead do I really need to?
@@wallace4932 I bet it's just a 'best practice'. Same thing when working on the car; Neg. Battery cable off is always the first step. With electronics, it seems like static discharge is by far the biggest danger to worry about.
@@MrWolfTickets Yes...that was the first analogy I thought of too (car battery). Just trying to reduce the amount of disassembly to replace screen. Thanks!
Nice work with music
sir can I know what kind of LCD are we going to replace on my One plus 7T? The screen is totally black
My phone screen went off (no scratch on it still), I got it changed from service center and now the fingerprint sensor is not recognising.. tried setting new n still it's showing same issue
Please suggest 🙏
THX. great, but there is a big problem with the fingerprint sensor! How to fix it? Factory reset doesn't help.
I have the same problem. The setup works, but it doesn't actually recognize my finger when trying to unlock. I thought I might have damaged the cable going to the fingerprint sensor, but if you're having the same problem, I guess not.
Oh wait it actually does work if I put the finger a little lower than usual. The recognition is definitely worse than before though.
WARNING! Do not remove the plastic between the body and screen. The new screen wont come with it.
WHat plastic
@@glitchhin332 if remove the your screen you have to preserve the plastic buffer thats attached to the original screen and then take it off and put it in your new screen.
@@MrRonski there are three layers to the phone screen
1.the clear plastic thing covering the screen
2.the screen
3.the black plastic lining on the edges on the phone that is underneath the screen.
are you saying to Not remove No.3 or No.1, sorry for the confusion.
Great Video, I'm planing of just buying a OnePlus 7 Display and build in onto my OnePlus 7t Smartphone. I need to restore my Data after the Display has cracked.
The adapter size looks the same for all the OnePlus Models. Just the Display Size is a bit smaller on the OnePlus 7, but maybe it will work. What do you guys think?
has it worked ?
I want to know too!
Good job bhai
Hi man I have OnePlus 7t my screen got broke And is a full black screen I plug the phone to the charger and the screen still black. But when I push the sound button down and up It give me feedback. Do you think I have to made just a simple screen with no frame replacement, or will I have to get a new frame?
And when I plug the phone to with my computer It recognizes the phone meaning that the phone is not dead is just not giving me picture
Yes. Try a new screen.
I think I messed it up. The screen takes a couple of miliseconds to recognise a touch signal, wich I didn't notice while testing. And also I damaged the cable connecting the fingerprint sensor (because it got stuck to the battery adhesive) so it isn't working anymore either. Additionaly I left the old battery in because the new one showed 1% even though that definetly wasn't the case because it showed that through multiple boot-up cycles and normally the battery would've been dead by then. I'd rather have a working battery status than a new battery that only shows 1%. I have no Idea what is causing the screen thing so I'll hold off on fixing the other problems for now. Help is appreciated.
Edit: Somehow it was a software problem all along, the fingerprint sensor and display work excellent after the last update. I guess the cable held up against the little plastic pry tool after all (even though it looks a bit wavy now). Good thing I waited a bit before buying a new phone. Now it would make sense to swap the battery, but honestly right now I'm just happy everything is working so Imma wait till the battery actually needs to be swapped.
Edit 2: Wait nevermind, it's only the screen that's working again. I can set up a fingerprint now, but it doesn't recognize my finger when I try to unlock my phone. I might replace the cable that I probably damaged, but I'd rather not for now.
-Edit- Update 3: Actually the fingerprint sensor did work, however with a fairly low success rate. I noticed that when I pushed down the bottom left of the screen, the fingerprint worked way better. When I was putting the screen in I was focussing on the top of the screen, since the earpiece plastic cracked and I wanted to make sure it glued in properly, so the bottom was pretty loose. So I took the screen off again and really made sure to remove all the glue I could and tried putting it in properly. I also put a little too much stress on the old battery in the process, because I hadn't put the pull tab back in and the battery rebonded with the sticky pads way too well, so I replaced it with the one I wanted to put in anyways. The fingerprint sensor works pretty much like new after this, even though the display is still not seated perfectly. Right now I'm waiting for the battery to charge but I don't know if it'll be better than the old one, since it seems to have either been on 1% the whole time it was stored, wich puts a lot of stress on the battery, since the optimal charge would be around 50%, or the status is not acurate, wich is probably unlikely, as it is going up in percentage right now. Also it's worth mentioning that the software bug I encountered was probably because I forgot to shut the phone down after testing the screen and removing the battery again. Didn't encounter the bug this time, since I payed more attention and I didn't need to test the screen. The screen is good now and there were no hardware faults on it the whole time so you should be safe buying it. As long as you don't do any mistake during the repair. I'll do an update on the battery if I remember to.
Dear, is the process the same for 7t pro, or are there anything different to care about? Thanks
I can't get this damn screen off. There's no where to grab the phone but on the edges of the screen. I heated it up for about 6 min and it's still not budging. Any help would be great.
First - heat the part of the screen where you start, second - use isopropyl alcohol 99% to dissolve glue between glass and frame, drip it onto the surface of the razor, and then plastic card, when you start to see black glue coming out with a blade and then with a plastic card - you are on the right way=)
lol dude. You need to buy that whole new blue case with the display included. You couldn't only buy the screen.
@@BOSCOCHUNG Is that so? I did the repair with the screen only, the plastic frame cracked at the earpiece while removing the old screen, but you can't tell now that the new one is in. I don't think it's worth the effort swapping the whole frame. And you definitely don't have to.
Can you do a video without the screen frame?
will i have to format my phone in order to replace the display ?
Most phones do not need to be formatted before you can replace the screen.
First of all thank you so much for making this video,
It's helping me undertand how can I fix my own phone.
Now I to my question in the video (2;10) do you use some kind of Adhesive or super glue called B-7000
You can't make it cuz the screen doesn't exist
@@charlotte7976 agreed. I can't find a fucking replacement for the life of me
I found the screen replacement on their page, they are currently on stuck. And I got the glue B-7000 from Amazon
does the 90hz refresh gone when screen was replaced?
Late reply, but yeah it's def still 90hz. The stutter is pretty noticable when switching to 60hz in the settings.
I recently replaced my broken display from service center. And now noticed my alert slider malfunctions. Some time it works in reverse order. Some times it works randomly. Not sure if it is software problem or the service center guy made some mistake. Pls help.
Ironic how the display without the frame takes way less work
does the under display fingerprint work
Hello, does this come with the screen and digitizer?
yes it do ibought one
@@thadeuspark4313 is it the original screen or work good like the original one
I need a screen of that but there are no available
Me too Carlos, it seems impossible to find
where can I buy the screen?
It is imposible to find one.
The screen doesn't exist yet in china this video is a scam the only thing you can do I buy a new phone. I paid $400 on alixpress instead of 650
Where do you get a screen
www.witrigs.com/oem-screen-replacement-for-oneplus-7t
@@EricWitrigs why do you make publicity for a screen who isn't even on the market yet in china... It has never been in stock on your site so stop selling bullshit in your video's
What is the touch test code
How much does it cost to replace display for one plus 7t ?
140$
does it have 90 hz
Where can I buy this display in cheaper price?
I need to get that screen! Where can I buy it?
Nowhere it does not exist, it has been 7 months since this phone launch and nobody could make a digitizer screen replacement, and now with the corona it will take like 4 more months to even see one.
Search it in aliexpress, I bought it there and I am waiting for the DHL shipping, I paid 150 dollars approximately, the price down a lot in the last weeks, the launch prise was approx 320 dlls
@@isaidmv1 did you changed the display?
how was picture quality after changing? is it similar to the original?
Спасибо TY!!!!!!!
Actually, Is the screen and frame seperated? . where can i buy only frame?
check out the link www.witrigs.com/oem-middle-frame-for-oneplus-7t-gery
the screen did not include plastic border causing gap around whole screeen
Please water test on oneplus 7t pro McLaren edition
Wowww
Display milega kya aapke paas 7t ka
Wat is the cost of display
The screen replacement does not exist, Don’t even bother to look for one. You will have to buy a new phone.
Oneplus service center. Cost is around 12500 INR including gst
Got one from China from a company called Witrigs. I think it's around$150 - $200 bucks.
samsung a50s water proof test
After screen replacement
Will i get my old memory/data ? Plz reply me
Of course? In what logic you would lose them?
In Screen replacement you don't loose data...No data loss
CAN'T FIND THIS SHIT NOWHERE
It does not exist, you buy a phone with no screen replacement part in the entire world, it has been 7 months and nobody could make a replacement.
how to remove the oneplus7t camera bump scratch
i just broke my new scree -__________-
please god send me a message
made it look so easy.... lol
My display for my One plus 7T is broken ..Can u please tell me where can I buy the new & genuine display for One Plus 7T&what will it cost?
On the same boat as you mate. Can't find a replacement screen for the life of me
@@andrespereira9507 just contact service centre mate it's as simple as that!
Waste video